|
|
|
|
Placer mining
|
| |
|
| |
Placer mining (pronounced "plass-er") is the mining of alluvial deposits for minerals. This may be done by open-pit (also called open-cast mining) or by various forms of tunneling into ancient riverbeds. Excavation may be accomplished using water pressure (hydraulic mining), surface excavating equipment or tunneling equipment.
The name derives from Spanish, placera, meaning "alluvial sand." It refers to mining the precious metal deposits (particularly gold and gemstones) found in alluvial deposits—deposits of sand and gravel in modern or ancient stream beds.
Discussion
Ask a question about 'Placer mining' Start a new discussion about 'Placer mining' Answer questions from other users |
Encyclopedia
Placer mining (pronounced "plass-er") is the mining of alluvial deposits for minerals. This may be done by open-pit (also called open-cast mining) or by various forms of tunneling into ancient riverbeds. Excavation may be accomplished using water pressure (hydraulic mining), surface excavating equipment or tunneling equipment.
The name derives from Spanish, placera, meaning "alluvial sand." It refers to mining the precious metal deposits (particularly gold and gemstones) found in alluvial deposits—deposits of sand and gravel in modern or ancient stream beds. The metal or gemstones, having been moved by stream flow from an original source such as a vein, is typically only a minuscule portion of the total deposit. The containing material may be too loose to safely mine by tunneling. Where water under pressure is available, water under pressure may be used to mine, move, and separate the precious material from the deposit.
History
Placers supplied most of the gold for a large part of the ancient world. Hydraulic mining methods such as hushing were used widely by the Romans across their empire, but especially in the gold fields of northern Spain after its conquest by Augustus in 25 BC. One of the largest sites was at Las Medulas, where seven 30 mile long aqueducts were used to work the alluvial gold deposits through the first century AD. (Inclusions of platinum-group metals in a very large proportion of gold items indicate that the gold was largely derived from placer or alluvial deposits. Platinum group metals are seldom found with gold in hardrock reef or vein deposits.) In North America, placer mining was famous in the context of several gold rushes, particularly the California Gold Rush, the Fraser Canyon Gold Rush and the Klondike Gold Rush. Placer mining continues in many areas of the world as a source of diamonds, industrial minerals and metals, gems (in Myanmar and Sri Lanka), platinum, and of gold (in the Yukon, Alaska and British Columbia).
Methods
The simplest technique to extract gold from placer ore is panning. In panning, some mined ore is placed in a large metal or plastic pan, combined with a generous amount of water, and agitated so that the gold particles, being of higher density than the other material, settle to the bottom of the pan. The lighter gangue material such as sand, mud and gravel are then washed over the side of the pan, leaving the gold behind. Once a placer deposit is located by gold panning, the miner usually shifts to equipment that can treat volumes of sand and gravel more quickly and efficiently.
The same principle may be employed on a larger scale by constructing a short sluice box, with barriers along the bottom to trap the heavier gold particles as water washes them and the other material along the box. This method better suits excavation with shovels or similar implements to feed ore into the device. Similar in principle to a sluice is a rocker, a cradle-like piece of equipment that could be rocked like a cradle to sift sands through screens, which was introduced by Chinese miners in British Columbia and Australia, where the practice was referred to as "rocking the golden baby". Another Chinese technique was the use of blankets to filter sand and gravels, catching fine gold in the fabric's weave, then burning the blankets to smelt the gold. Chinese were noted for the thoroughness of their placer extraction techniques, which included hand-washing of individual rocks as well as the complete displacement of streambeds and advanced flume and ditching techniques which became copied by other miners.
A trommel is composed of a slightly-inclined rotating metal tube (the 'scrubber section') with a screen at its discharge end. Lifter bars, sometimes in the form of bolted in angle iron, are attached to the interior of the scrubber section. The ore is fed into the elevated end of the trommel. Water (often under pressure) is provided to the scrubber and screen sections and the combination of water and mechanical action frees the valuable minerals from the ore. The mineral containing ore that passes through the screen is then further concentrated in smaller devices such as sluices and jigs. The larger pieces of ore that do not pass through the screen can be carried to a waste stack by a conveyor.
Environmental effects
Although not required, the used process water may be continuously recycled and the ore from which the sought after minerals has been extracted ("the tailings") can be reclaimed. While these recycling and reclamation processes are more common in modern placer mining operations they are still not universally done. In earlier times the process water was not generally recycled and the spent ore was not reclaimed. The remains of a Roman alluvial gold mine at Las Médulas are so spectacular as to justify the site being designated UNESCO World Heritage status. The methods used by the Roman miners are fully described by Pliny the Elder in his work Naturalis Historia published in about 77 AD. The author was a Procurator in the region and so probably witnessed large-scale hydraulic mining of the placer deposits there. He also added that the local lake Curacado had been heavily silted by the mining methods.
Environmental activists describe the hydraulic mining form of placer mining as environmentally destructive because of the large amounts of silt that it adds to previously clear running streams. Most placer mines today use settling ponds, if only to ensure that they have sufficient water to run their sluicing operations.
In California, from 1853 to 1884, "hydraulicking" of placers removed an enormous amount of material from the gold fields, material that was carried downstream and raised the level of the Central Valley by some seven feet in some areas and settled in a huge layer at the bottom of San Francisco Bay. The process raised an opposition calling themselves the "Anti-Debris Association". In January of 1884, a United States District Court banned the flushing of debris into streams, and the hydraulic mining mania in California's gold country came to an end.
See also
|
| |
|
|
