AMC Engines
Encyclopedia
The American Motors Corporation (AMC) used V8, straight-6
Straight-6
The straight-six engine or inline-six engine is a six-cylinder internal combustion engine with all six cylinders mounted in a straight line along the crankcase...

, V6
V6 engine
A V6 engine is a V engine with six cylinders mounted on the crankcase in two banks of three cylinders, usually set at either a right angle or an acute angle to each other, with all six pistons driving a common crankshaft...

, and straight-4
Straight-4
The inline-four engine or straight-four engine is an internal combustion engine with all four cylinders mounted in a straight line, or plane along the crankcase. The single bank of cylinders may be oriented in either a vertical or an inclined plane with all the pistons driving a common crankshaft....

 engines in various passenger automobiles and Jeep
Jeep
Jeep is an automobile marque of Chrysler . The first Willys Jeeps were produced in 1941 with the first civilian models in 1945, making it the oldest off-road vehicle and sport utility vehicle brand. It inspired a number of other light utility vehicles, such as the Land Rover which is the second...

 vehicles from 1954 through 2006. Some engines were of AMC design or inherited from its constituents. Others were bought from, or had their design bought from other manufacturers.

Air-Cooled 108

The 108 cu in (1.8 l) an AMC designed air-cooled V4 engine
V4 engine
A V4 engine is a V form engine with four cylinders and three main bearings.-Automobile use:Lancia produced several narrow-angle V4 engines from the 1920s through 1960s for cars like the Lambda, Augusta, Artena, Aprilia, Ardea, Appia, and Fulvia....

 that was used in AMC's lightweight, aluminium-bodied M422 'Mighty Mite'
M422 Mighty Mite
The M422 'Mighty Mite was a light weight ¼-ton 4x4 tactical truck, suitable for airlifting and manhandling. From 1959-1962, the Mighty Mite was built by American Motors for the United States Marine Corps.-History:...

 military vehicle, built from January 1960 to January 1963 as an air transportable (by the helicopters of the time) Jeep for the U.S. Marine Corps. This engine was unsuitable for regular passenger car use mainly due to its relatively small displacement and power output.
  • Bore & Stroke: 3 1/4 inch x 3 1/4 inch
  • Compression: 7.5:1
  • Horsepower: 52 hp @ 3,600 rpm
  • Torque: 90 lbft @ 2,500 rpm

Audi/VW 121

The 121 cu in (2 l) was an advanced design overhead camshaft
Overhead camshaft
Overhead cam valvetrain configurations place the engine camshaft within the cylinder heads, above the combustion chambers, and drive the valves or lifters in a more direct manner compared to overhead valves and pushrods...

 four-cylinder engine bought from Audi/Volkswagen 1977 through 1979. Though a small engine, its advanced design created reasonable power for its size and due to being an OHC engine, it had a high redline. This engine was also used in the Audi 100
Audi 100
The restyled C2 Audi 100 was launched in 1976, with an in-line five-cylinder engine...

, Volkswagen LT
Volkswagen LT
The Volkswagen LT was the largest light commercial vehicle panel van produced by Volkswagen from 1975 to 2006...

 van, and Porsche 924
Porsche 924
The Porsche 924 is an automobile produced by Porsche AG of Germany from 1976 to 1988. A two-door, 2+2 coupé, the 924 replaced the 914 as the company's entry-level model, and was the model that finally retired the 912. In production terms, the 924 was the first Porsche model powered by a...

. The engine was built to AMC specs, which are different from Audi/VW/Porshe specifications. AMC used a carburetor
Carburetor
A carburetor , carburettor, or carburetter is a device that blends air and fuel for an internal combustion engine. It is sometimes shortened to carb in North America and the United Kingdom....

 and standard points ignition as well as slightly larger clearances.

The original deal was for AMC to buy the design, eventually moving manufacturing to the United States. American Motors bought a plant specifically to build the engine, but never sold enough to move complete manufacturing. The AMC engines were assembled in the U.S. from major castings supplied by VW, hence the different assembly clearances. As part of the agreement, AMC was not to use the VW or Audi names when referring to the engine. Everyone familiar with the design knew they were virtually identical, and the automotive press commonly referred to them as Audi or VW engines, just as we do in this article. VW/Audi/Porsche U.S. spec engines produced 110 hp in mid-1977; earlier models produced 95 hp -- 15 hp to 30 hpless than the AMC version.
  • Bore x Stroke 3.41" x 3.32"
  • Compression Ratio 8.1:1
  • Horsepower (net) 80 hp @ 5,000 rpm
  • Torque (net) 105 lbft @ 2,800 rpm


It was used in the AMC Gremlin
AMC Gremlin
The AMC Gremlin is a two-door subcompact car produced in the United States and Canada by the American Motors Corporation between 1970 and 1978. AMC reduced its development and manufacturing costs by adapting a shortened Hornet platform with a Kammback-type tail...

, AMC Spirit
AMC Spirit
The AMC Spirit was a subcompact marketed by American Motors Corporation from 1979 to 1983 as a restyled replacement for the Gremlin. The Spirit shared the Gremlin's platform and was offered in two hatchback variations, each with two doors — marketed as sedan and liftback...

, and AMC Concord
AMC Concord
The AMC Concord is a compact car produced by the American Motors Corporation for the 1978 through 1983 model years. The Concord replaced the AMC Hornet and to some extent the mid-size AMC Matador, discontinued after 1978 in a market moving to downsized automobiles...

, The only Jeep this engine was used in was the 1979 DJ5G (Postal delivery). In the DJ5G it was mated to a 3sp 904 automatic transmission with a VW/Audi pattern bell. In the manual shifted cars it was mated to a BorgWarner
BorgWarner
BorgWarner Inc. is a United States-based worldwide automotive industry components and parts supplier. It is primarily known for its powertrain products, which include manual and automatic transmissions and transmission components, , turbochargers, engine valve timing system...

 HR-1 4-speed transmission.

It shares the bellhousing pattern with several German cars, it does not share the bellhousing pattern with the VW Rabbit diesel line of engines.

Renault 126 Turbo Diesel

The Renault-developed 126 cu in (2.1 l) 4-cylinder Turbo Diesel was an optional engine used in AMC's Jeep line between 1984 and 1986. It was mated to a standard four-speed or optional five-speed manual, and with either transmission delivered exceptional fuel economy. For a diesel of this size at that time, power delivery was respectable, at 85 hp @ 3750 RPM, 132 lbft @ 2750 RPM. The engine was also known for relatively instant pedal response at a time when both diesel- and turbocharger-equipped engines generally were known for a noticeable lag. Weighing in at a scant 331 pounds, it also featured first-tier technology for the time such as an intercooler and an overhead cam. When it reached market, it marked the first time a turbocharged diesel was offered in a sports-utility vehicle in the United States.

Pontiac 151

The 151 cu in (2.5 l) is commonly referred to as the "Iron Duke
GM Iron Duke engine
Iron Dukes were fitted with fuel injection in 1982. This version was christened the Tech IV, though Car and Driver later ridiculed it as the low-Tech IV. Power output remained at ....

" and is a Pontiac design. It was purchased by AMC from 1979 through 1983 as the base option in the RWD Spirit
AMC Spirit
The AMC Spirit was a subcompact marketed by American Motors Corporation from 1979 to 1983 as a restyled replacement for the Gremlin. The Spirit shared the Gremlin's platform and was offered in two hatchback variations, each with two doors — marketed as sedan and liftback...

 and Concord
AMC Concord
The AMC Concord is a compact car produced by the American Motors Corporation for the 1978 through 1983 model years. The Concord replaced the AMC Hornet and to some extent the mid-size AMC Matador, discontinued after 1978 in a market moving to downsized automobiles...

, the AWD Eagle
AMC Eagle
The AMC Eagle is a compact-sized four-wheel drive passenger vehicle that was produced by American Motors Corporation . The AMC Eagle line of vehicles inaugurated a new product category of "sport-utility" or crossover SUV....

 models, economy versions of Jeep CJ
Jeep CJ
The Willys CJ is a public version of the famous Willys Military Jeep from World War II.The first CJ prototype was introduced in 1944 by Willys, and the same basic vehicle stayed in production through seven variants and three corporate parents until 1986.A variant of the CJ is still in production...

s, and in postal Jeeps. This early version used a Chevrolet small block V-8 bell housing bolt pattern. 1984 and later model GM 151s used the corporate GM four-cylinder/small V-6 bolt pattern (not used by AMC).
  • Bore x Stroke 4.00" x 3.00"
  • Compression Ratio 8.2:1
  • Horsepower (net) 82 hp @ 4,000 rpm
  • Torque (net) 125 lbft @ 2,600 rpm

AMC 150

In 1984 AMC introduced their own four-cylinder engine design. All previous fours (with the exception of the Air-Cooled 108) were purchased for interim use. For more information follow the link below.

Nash and Hudson Beginnings

When Nash and Hudson merged to form AMC in 1954 all the Hudson bodies were dropped for the 1955 model year. The Ambassador and Statesman received a hasty grille/taillight/trim/dash restyling to create the new Hudson Hornet and Wasp. The Nash Ambassador Six retained the Nash 252.6 OHV six for 55 and 56, V-8 only for 1957. The Nash OHV six, dating back to 1934, was a totally different design than the Rambler 195.6. Hudson six-cylinder cars retained the Hudson L-head six, 308 CID in the Hornet and 202 CID in the Wasp. This was the only major Hudson component left - it dated back to the 40s. All Rambler models, whether badged Hudson or Nash, used the Rambler 195.6.

Rambler 195.6

This motor was originally a Nash design dating back to 1940. AMC used an L-head (flat-head, 1955, 1958-65) and OHV (1956-65) version, as well as an aluminum block version (1961-63). All shared the same bore and stroke as well as some other features/components. For more information see AMC Straight-6 engine
AMC Straight-6 engine
The American Motors Corporation straight-6 family of engines was used by a number of AMC and Jeep vehicles from 1964 through 2006.-195.6:American Motors' first straight-six engine was the...

.

Kaiser 230

While not an AMC design and never used in an AMC vehicle, this engine is included because it is often confused with the AMC/Jeep 232, which Kaiser Jeep
Jeep
Jeep is an automobile marque of Chrysler . The first Willys Jeeps were produced in 1941 with the first civilian models in 1945, making it the oldest off-road vehicle and sport utility vehicle brand. It inspired a number of other light utility vehicles, such as the Land Rover which is the second...

 purchased to replace the SOHC Kaiser engine 230 cu in (3.8 l) in 1965. The Tornado first appeared in civilian Jeep vehicles in 1963 and was only used until 1965. The US Army M-715 and derivatives used it through the 60s and early 70s. The AMC and Kaiser engines do not share bellhousing bolt patterns. Cam trouble on the 230 was common due to oils that weren't yet up to the task back then.

With its over-square bore and stroke, it was very much built for low rpm torque. It was a very dependable engine with reports of them going 250,000 mi. with no major problems -- with proper maintenance. Production continued through 1983 in Argentina at Industrias Kaiser Argentina
Industrias Kaiser Argentina
Industrias Kaiser Argentina S.A. or IKA was an Argentine motor company established in 1956 in Córdoba Province as a joint venture with Kaiser Motors of the United States....

. There is was used in several AMC sourced cars and Kaiser Jeeps. Jeep didn't become part of AMC until 1970.

Buick 225

The "Dauntless" 225 cu in (3.7 l) V6 engine
V6 engine
A V6 engine is a V engine with six cylinders mounted on the crankcase in two banks of three cylinders, usually set at either a right angle or an acute angle to each other, with all six pistons driving a common crankshaft...

 was introduced in the 1966 Kaiser CJ and as an option in the C101 Jeepster Commando. Kaiser bought the tooling from Buick to build the 225 during the short period prior to selling their Jeep subsidiary to AMC.

AMC retained the Buick engine briefly after it bought Jeep. It was retired in 1971, shortly after the 1970 acquisition. The tooling was then sold back to General Motors
General Motors
General Motors Company , commonly known as GM, formerly incorporated as General Motors Corporation, is an American multinational automotive corporation headquartered in Detroit, Michigan and the world's second-largest automaker in 2010...

 in 1974, and this engine continues to be used today.

The engine was an odd-fire V6, meaning that TDC for the cylinders was not evenly spaced around the engine but grouped in pairs. The engine was known at the time for its power and reliability. It would idle slowly, but not as smooth as other engines, especially the inline sixes.

This engine was used in the following vehicles:
  • Jeep CJ-5
  • Jeep CJ-6
  • C101 Jeepster Commando
  • (various small Buicks @'60 till @'64)

The Modern Era I-6

American Motors designed an entirely new six-cylinder for 1964, and this version was in constant production by AMC and Chrysler through 2006. See AMC Straight-6 engine
AMC Straight-6 engine
The American Motors Corporation straight-6 family of engines was used by a number of AMC and Jeep vehicles from 1964 through 2006.-195.6:American Motors' first straight-six engine was the...

.
199 cu in (3.3 l)
232 cu in (3.8 l)
258 cu in (4.2 l)
242 cu in (4 l)


The bell pattern was different for the early motors from the AMC V8s. In '71 AMC raised the block height and increased the stroke on the 199 and early 232 motors. The 199 became 232 cubic inches and the old 232 became 258. In '71 only these two RB or "raised block" engines shared the small bell pattern of the earlier engines. In '72 both 232 and 258 changed bell pattern to match AMC V8s, at the same time AMC switched from Borg-Warner to Chrysler automatic transmissions.

General Motors V6

171 cu in (2.8 l) GM 60-Degree LR2 V6 engine
  • Used in the 1984-1986 Jeep Cherokee (XJ)
    Jeep Cherokee (XJ)
    The Jeep Cherokee is a unibody compact SUV. It shared the name of the original full-size SJ model, but without a body-on-frame chassis, it set the stage for the modern SUV. Its innovative appearance and sales popularity spawned important imitators as other automakers began to notice that this...


V8 Engines

Prior to introducing an in-house designed V-8 AMC purchased V-8s from Packard. They were only used in 1955-56 Nash Ambassadors and Hudson Hornets. The 320 was used in 1955, 352 in 1956. Late in 1956 AMC introduced their GEN-1 design as a 250, used only in Ambassador and Hornet Specials. The Specials were actually the slightly smaller and lighter Statesman/Wasp two-door hardtop bodies with Ambassador/Hornet trim. The Packard engines were dropped after 1956. All Packard V-8s came exclusively with the Packard Ultramatic automatic transmission. Packard UltramaticTransmission
Ultramatic
For the Voigtländer SLR camera, see Voigtländer Ultramatic CSUltramatic was the trademarked name of the Packard Motor Car Company's automatic transmission introduced in 1949 and produced until 1956 at Packard's Detroit, Michigan factory....


AMC went through three generations of its V8 Block, though the most famous are its third generation blocks used in muscle cars. Generally, GEN-2 and 3 AMC V8s are considered "Small Block" due to exterior size and their maximum displacement. The GEN-1 engine is rather bulky and heavy for its displacement. It compares in size and weight to a "Big Block". Technically there is no "big" and "small" block AMC V-8s -- there was only one design in production at any given time. All AMC designed V-8s share one thing -- a common bore center of 4.75". This is the same as Chrysler Big Block V-8s, and more similar to other big blocks than small blocks. Most other features, at least of the GEN-2 and 3 models, are more typical of small block designs.

GEN-1 Nash/Hudson/Rambler V8s (1956-1966)

250 cu in (4.1 l)
287 cu in (4.7 l)
327 cu in (5.4 l)

GEN-2 AMC Short-Deck V-8 (1966–1970)

290 cu in (4.8 l)
343 cu in (5.6 l)
AMX 390 cu in (6.4 l)

GEN-3 AMC Tall-deck (1970-1991)

304 cu in (5 l)
360 cu in (5.9 l)
390 cu in (6.4 l)
401 cu in (6.6 l)

See also

  • AMC Straight-4 engine
    AMC Straight-4 engine
    The American Motors Corporation straight-4 engine was used by a number of AMC, Jeep, and Dodge vehicles from 1984-2002.*For an outline of all engines used by AMC see -Development:...

  • AMC Straight-6 engine
    AMC Straight-6 engine
    The American Motors Corporation straight-6 family of engines was used by a number of AMC and Jeep vehicles from 1964 through 2006.-195.6:American Motors' first straight-six engine was the...

  • AMC V8 engine
    AMC V8 engine
    American Motors Corporation produced a series of widely-used V8 engines from the mid-1950s before being absorbed into Chrysler in 1987. Chrysler kept the AMC V8 in production until 1991 for the Jeep Grand Wagoneer....

  • AMC/Jeep Transmissions
  • List of Chrysler engines
  • AMC Rambler Car Club
  • AMCyclopedia
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK