The
laws of cricket are a set of
rulesThe regulation of sport is usually done by a regulatory agency for each sport, resulting in a core of relatively invariant, agreed rules. People responsible for leisure activities often seek recognition and respectability as sports by joining sports federations such as the International Olympic...
established by the
Marylebone Cricket ClubMarylebone Cricket Club is a cricket club in London founded in 1787. Its influence and longevity now witness it as a private members' club dedicated to the development of cricket. It owns, and is based at, Lord's Cricket Ground in St John's Wood, London NW8. MCC was formerly the governing body of...
(MCC) which describe the laws of
cricketCricket is a bat-and-ball game played between two teams of 11 players on an oval-shaped field, at the centre of which is a rectangular 22-yard long pitch. One team bats, trying to score as many runs as possible while the other team bowls and fields, trying to dismiss the batsmen and thus limit the...
worldwide, to ensure uniformity and fairness. There are currently 42 laws, which outline all aspects of how the game is played from how a team wins a game, how a batsman is dismissed, through to specifications on how the pitch is to be prepared and maintained. The MCC is a private club based in
LondonLondon is the capital city of :England and the :United Kingdom, the largest metropolitan area in the United Kingdom, and the largest urban zone in the European Union by most measures. Located on the River Thames, London has been a major settlement for two millennia, its history going back to its...
in
EnglandEngland is a country that is part of the United Kingdom. It shares land borders with Scotland to the north and Wales to the west; the Irish Sea is to the north west, the Celtic Sea to the south west, with the North Sea to the east and the English Channel to the south separating it from continental...
and is no longer the game's official governing body; however the MCC retains the copyright in the laws of the game and only the MCC may change the laws, although nowadays this would usually only be done after discussions with the game's global governing body the
International Cricket CouncilThe International Cricket Council is the international governing body of cricket. It was founded as the Imperial Cricket Conference in 1909 by representatives from England, Australia and South Africa, renamed the International Cricket Conference in 1965, and took up its current name in 1989.The...
(ICC).
Cricket is one of the few
sportA Sport is all forms of physical activity which, through casual or organised participation, aim to use, maintain or improve physical fitness and provide entertainment to participants. Sport may be competitive, where a winner or winners can be identified by objective means, and may require a degree...
s for which the governing principles are referred to as 'Laws' rather than as 'Rules' or 'Regulations'. However regulations to supplement and/or vary the laws may be agreed for particular competitions.
History
The origins of cricket are debatable, but it probably derived from numerous games and sports involving hitting a ball with a bat or club (see
History of cricketThe game of cricket has a known history spanning from the 16th century to the present day, with international matches played since 1844, although the official history of international Test cricket began in 1877...
). In the eighteenth century, it expanded to become a betting game especially popular with the British aristocracy. The earliest laws were drawn up in that context, to help regulate a game on which large sums of money were being staked. The earliest existing known Code of cricket was drawn up by certain "Noblemen and Gentlemen" who used the Artillery Ground in London in 1744. In 1755 there is further reference to the laws being revised by "Several Cricket Clubs, particularly the Star and Garter in Pall Mall", followed by a revision of the Laws by "a committee of Noblemen and Gentlemen of
KentKent is a county in southeast England, and is one of the home counties. It borders East Sussex, Surrey and Greater London and has a defined boundary with Essex in the middle of the Thames Estuary. The ceremonial county boundaries of Kent include the shire county of Kent and the unitary borough of...
,
HampshireHampshire is a county on the southern coast of England in the United Kingdom. The county town of Hampshire is Winchester, a historic cathedral city that was once the capital of England. Hampshire is notable for housing the original birthplaces of the Royal Navy, British Army, and Royal Air Force...
,
SurreySurrey is a county in the South East of England and is one of the Home Counties. The county borders Greater London, Kent, East Sussex, West Sussex, Hampshire and Berkshire. The historic county town is Guildford. Surrey County Council sits at Kingston upon Thames, although this has been part of...
,
SussexSussex , from the Old English Sūþsēaxe , is an historic county in South East England corresponding roughly in area to the ancient Kingdom of Sussex. It is bounded on the north by Surrey, east by Kent, south by the English Channel, and west by Hampshire, and is divided for local government into West...
,
MiddlesexMiddlesex is one of the historic counties of England and the second smallest by area. The low-lying county contained the wealthy and politically independent City of London on its southern boundary and was dominated by it from a very early time...
and London at the Star and Garter" in 1774. A printed form of the laws was published in 1775 and a further revision to the laws was undertaken by a similar body of Noblemen and Gentlemen of Kent, Hampshire, Surrey, Sussex, Middlesex and London in 1786.
However, these laws were not universally followed, with different games played under different guidance. On 30 May 1788, the
Marylebone Cricket ClubMarylebone Cricket Club is a cricket club in London founded in 1787. Its influence and longevity now witness it as a private members' club dedicated to the development of cricket. It owns, and is based at, Lord's Cricket Ground in St John's Wood, London NW8. MCC was formerly the governing body of...
, which had been formed by the leading noblemen and gentlemen playing the game just one year before, produced its first Code of Laws. Whilst the MCC's version of the Laws were not accepted fully immediately, or applied consistently, it is the successor of these Laws that governs the game today. The next major change in 1809 saw further standardisation of the weight of the ball from between 5 and 6 ounces (142 to 170 g) to between 5.5 and 5.75 ounces (156 to 163 g), and the width of the
cricket batA cricket bat is a specialised piece of equipment used by batsmen in the sport of cricket to hit the ball. It is usually made of willow wood. Its use is first mentioned in 1624....
was standardised for the first time. The law to score runs of a ball hitting the non-striker stumps was made redundant and the length of stumps was increased from 22 to 24 inches and bails from 6 to 7 inches to help the bowlers, and the importance of
umpiresIn cricket, an umpire is a person who has the authority to make judgements on the cricket field, according to the Laws of Cricket...
was further enhanced. Finally, a new method of dismissing a batsman was introduced. Previously, as cricket uses a hard ball and leg-pads were not used, players would naturally play with their legs away from the wicket. As batsmen started to wear pads, they became willing to cover their stumps with their legs to prevent the ball hitting the stumps and bowling them. Therefore a "
leg before wicketIn the sport of cricket, leg before wicket is one of the ways in which a batsman can be dismissed. An umpire will rule a batsman out LBW under a series of circumstances which primarily include the ball striking the batsman's body when it would otherwise have continued on to hit the batsman's...
" rule was introduced so that a batsman preventing the ball hitting his stumps with his legs would be out.
In 1829 the Length of stumps increased from 24 to 27 in (609.6 to 685.8 mm) and the length of the bails was increased from 7 to 8 in (177.8 to 203.2 mm), again to help the bowlers. For the first time, the thickness of stumps was mentioned. A new Code of Laws was approved by the MCC Committee on 19 May 1835, and another on 21 April 1884. In the 1884 laws the number of players was formalised for the first time (at eleven-a-side), and the size of the ball was formalised for the first time too. The follow-on rule was introduced. This was in response to the problem that to win a game a side needed to dismiss their opposition twice. A side that batted first and was fully on top of a match and scoring lots of runs would have to wait until it was dismissed a second time before it could attempt to dismiss the opposition a second time. As cricket is a time-limited game, it meant that sides that dominated the opposition could be forced to draw rather than win games. The initial follow-on rule was faulty, though, as it required a side to follow-on when it was behind. A side could deliberately concede its last wickets in the first innings in return for being able to bowl last on a deteriorating pitch. Later the follow-on rule was changed so that a team sufficiently ahead of its opposition has the option on whether to enforce it or not.
In 1947 a new Code was approved by the MCC on 7 May. In 1979 after a number of minor revisions of the 1947 Code, a new Code was approved at an MCC Special General Meeting on 21 November. This is known as the 1980 code. Amongst other changes, imperial units are now followed by metric units in the specifications.
In 1992 a second edition of the 1980 Code was produced. In 2000 a new Code, which for the first time included a Preamble defining the Spirit of Cricket was approved on 3 May. The code was rewritten into plain English and is more discursive than previous Codes. The length of an over was officially standardised at six balls for all matches, although in practice this had been the case for 20 or so years before that. In 2003 a second version of the 2000 Code was produced incorporating necessary amendments arising from the application of the 2000 Code.
Throwing was first regulated in laws produced in 1829. In 1864 overarm bowling was permitted for the first time.
In 1889, the length of an over increased from four balls to five balls. In 1900, the length of an over was increased to six balls. In 1922, variation was allowed in the length of the over (Australian overs to be eight balls). The 1947 Code stipulated that the length of an over was to be six or eight balls according to "prior agreement" between the captains.
Today's laws
The
Marylebone Cricket ClubMarylebone Cricket Club is a cricket club in London founded in 1787. Its influence and longevity now witness it as a private members' club dedicated to the development of cricket. It owns, and is based at, Lord's Cricket Ground in St John's Wood, London NW8. MCC was formerly the governing body of...
is the framer of the Laws of Cricket, the rules governing play of the game. The Laws are intended to apply to all two
inningsAn inning, or innings, is a fixed-length segment of a game in any of a variety of sports – most notably cricket and baseball during which one team attempts to score while the other team attempts to prevent the first from scoring. In cricket, the term innings is both singular and plural and is...
matches; the
International Cricket CouncilThe International Cricket Council is the international governing body of cricket. It was founded as the Imperial Cricket Conference in 1909 by representatives from England, Australia and South Africa, renamed the International Cricket Conference in 1965, and took up its current name in 1989.The...
has implemented "Standard Playing Conditions for
Test MatchesTest cricket is the longest form of the sport of cricket. Test matches are played between national representative teams with "Test status", as determined by the International Cricket Council , with four innings played between two teams of 11 players over a period of up to a maximum five days...
" and "Standard Playing Conditions for
One Day InternationalsLimited overs cricket, also known as one-day cricket and in a slightly different context as List A cricket, is a version of the sport of cricket in which a match is generally completed in one day, whereas Test and first-class matches can take up to five days to complete...
" to augment the Laws of Cricket. Similarly, each cricketing country has implemented Playing Conditions to govern domestic cricket. The Laws provide for One-day, or Limited overs cricket (including Twenty20) by stipulating that the number of innings per side may be one or two, and that each innings may be restricted to a maximum number of overs, or a maximum period of time.
The Laws retain the Imperial units as they were originally specified, but now also include metric conversions.
The Laws are organised into a Preface, a Preamble, forty-two Laws, and four appendices. The Preface relates to the Marylebone Cricket Club and the history of the Laws. The Preamble is a new addition and is related to "the Spirit of the Game;" it was introduced to discourage the increasing practices of ungentlemanly conduct.
Eight amendments were made to the laws which dealt with bad light, the toss, spirit of cricket, practice sessions, fielding athleticism and rare dismissals on September 30, 2010 w.e.f October 1, 2010. These amendments can be read
here
The Laws themselves deal with the following:
Players and officials
The first four laws cover the players, the umpires and the scorers.
Law 1: The playersA cricketer is a person who plays the sport of cricket. Official and long-established cricket publications prefer the traditional word "cricketer" over the rarely used term "cricket player"....
. A cricket team consists of eleven players, including a captain. Outside of official competitions, teams can agree to play more than eleven-a-side, though no more than eleven players may field.
Law 2: SubstitutesA substitute in the sport of cricket is a replacement player that the umpires allow when a player has been injured or become ill after the nomination of the players at the start of the game...
. In cricket, a substitute may be brought on for an injured fielder. However, a substitute may not bat, bowl, keep wicket or act as captain. The original player may return if he has recovered. A batsman who becomes unable to run may have a runner, who completes the runs while the batsman continues batting. Alternatively, a batsman may retire hurt or ill, and may return later to resume his innings if he recovers.
Law 3: The umpiresIn cricket, an umpire is a person who has the authority to make judgements on the cricket field, according to the Laws of Cricket...
. There are two umpires, who apply the Laws, make all necessary decisions, and relay the decisions to the scorers. While not required under the laws of cricket, in higher level cricket a third umpire (located off the ground and available to assist the on-field umpires) may be used under the specific playing conditions of a particular match or tournament.
Law 4: The scorersA scorer in the sport of cricket is someone appointed to record all runs scored, all wickets taken and, where appropriate, number of overs bowled. In professional games, in compliance with the Laws of Cricket, two scorers are appointed, most often one provided by each team.The scorers have no say...
. There are two scorers who respond to the umpires' signals and keep the score.
Equipment and laying out the pitch
After dealing with the players, the laws move on to discuss equipment and pitch specifications, except for specifications about the wicket-keeper's gloves, which are dealt with in Law 40. These laws are supplemented by Appendices A and B (see below).
Law 5: The ballA cricket ball is a hard, solid leather ball used to play cricket. Constructed of cork and leather, a cricket ball is heavily regulated by cricket law at first class level...
. A cricket ball is between 8 13/16 and 9 inches (22.4 cm and 22.9 cm) in circumference, and weighs between 5.5 and 5.75
ounceThe ounce is a unit of mass with several definitions, the most commonly used of which are equal to approximately 28 grams. The ounce is used in a number of different systems, including various systems of mass that form part of the imperial and United States customary systems...
s (155.9g and 163g). Only one ball is used at a time, unless it is lost, when it is replaced with a ball of similar wear. It is also replaced at the start of each innings, and may, at the request of the fielding side, be replaced with a new ball, after a certain number of overs have been bowled (80 in Test matches, 34 in ODIs). The gradual degradation of the ball through the innings is an important aspect of the game.
Law 6: The batA cricket bat is a specialised piece of equipment used by batsmen in the sport of cricket to hit the ball. It is usually made of willow wood. Its use is first mentioned in 1624....
. The bat is no more than 38 inches (96.5 cm) in length, and no more than 4.25 inches (10.8 cm) wide. The hand or glove holding the bat is considered part of the bat. Ever since the Heavy Metal incident, a highly publicized marketing attempt by
Dennis LilleeDennis Keith Lillee, AM, MBE is a former Australian cricketer rated as the "outstanding fast bowler of his generation"...
, who brought out an
aluminiumAluminium or aluminum is a silvery white member of the boron group of chemical elements. It has the symbol Al, and its atomic number is 13. It is not soluble in water under normal circumstances....
bat during an international game, the laws have provided that the blade of the bat must be made of wood (and in practice, they are made from White Willow wood).
Law 7: The pitchIn the game of cricket, the cricket pitch consists of the central strip of the cricket field between the wickets - 1 chain or 22 yards long and 10 feet wide. The surface is very flat and normally covered with extremely short grass though this grass is soon removed by wear at the ends of the...
. The pitch is a rectangular area of the ground 22 yards (20.1 m) long and 10 ft (3 m) wide. The Ground Authority selects and prepares the pitch, but once the game has started, the umpires control what happens to the pitch. The umpires are also the arbiters of whether the pitch is fit for play, and if they deem it unfit, with the consent of both captains can change the pitch. Professional cricket is almost always played on a grass surface. However, in the event a non-turf pitch is used, the artificial surface must have a minimum length of 58 ft (17.7 m) and a minimum width of 6 ft (1.8 m).
Law 8: The wicketsIn the sport of cricket the word wicket has several distinct meanings:-Definitions of wicket:Most of the time, the wicket is one of the two sets of three stumps and two bails at either end of the pitch...
. The wicket consists of three wooden stumps that are 28 inches (71.1 cm) tall. The stumps are placed along the batting crease with equal distances between each stump. They are positioned so they are 9 inches (22.9 cm) wide. Two wooden bails are placed on top of the stumps. The bails must not project more than 0.5 inches (1.3 cm) above the stumps, and must, for men's cricket, be 4+5/16 in long. There are also specified lengths for the barrel and spigots of the bail. There are different specifications for the wickets and bails for junior cricket. The umpires may dispense with the bails if conditions are unfit (i.e. it is windy so they might fall off by themselves). Further details on the specifications of the wickets are contained in Appendix A to the laws.
Law 9: Bowling, popping, and return creasesIn the sport of cricket, the crease is a certain area demarcated by white lines painted or chalked on the field of play.The term crease also refers to any of the lines themselves, particularly the popping crease. Law 9 of the Laws of Cricket governs the size and position of the crease markings...
. This law sets out the dimensions and locations of the creases. The bowling crease, which is the line the stumps are in the middle of, is drawn at each end of the pitch so that the three stumps in the set of stumps at that end of the pitch fall on it (and consequently it is perpendicular to the imaginary line joining the centres of both middle stumps). Each bowling crease should be 8 in 8 in (2.64 m) in length, centred on the middle stump at each end, and each bowling crease terminates at one of the return creases. The popping crease, which determines whether a batsman is in his ground or not, and which is used in determining front-foot no balls (see law 24), is drawn at each end of the pitch in front of each of the two sets of stumps. The popping crease must be 4 feet (1.2 m) in front of and parallel to the bowling crease. Although it is considered to have unlimited length, the popping crease must be marked to at least 6 feet (1.8 m) on either side of the imaginary line joining the centres of the middle stumps. The return creases, which are the lines a bowler must be within when making a delivery, are drawn on each side of each set of the stumps, along each sides of the pitch (so there are four return creases in all, one on either side of both sets of stumps). The return creases lie perpendicular to the popping crease and the bowling crease, 4 in 4 in (1.32 m) either side of and parallel to the imaginary line joining the centres of the two middle stumps. Each return crease terminates at one end at the popping crease but the other end is considered to be unlimited in length and must be marked to a minimum of 8 feet (2.4 m) from the popping crease.
Law 10: Preparation and maintenance of the playing areaIn the game of cricket, the cricket pitch consists of the central strip of the cricket field between the wickets - 1 chain or 22 yards long and 10 feet wide. The surface is very flat and normally covered with extremely short grass though this grass is soon removed by wear at the ends of the...
. When a cricket ball is bowled it almost always bounces on the pitch, and the behaviour of the ball is greatly influenced by the condition of the pitch. As a consequence, detailed rules on the management of the pitch are necessary. This law contains the rules governing how pitches should be prepared, mown, rolled, and maintained.
Law 11: Covering the pitchIn the game of cricket, the cricket pitch consists of the central strip of the cricket field between the wickets - 1 chain or 22 yards long and 10 feet wide. The surface is very flat and normally covered with extremely short grass though this grass is soon removed by wear at the ends of the...
. The pitch is said to be 'covered' when the groundsmen have placed covers on it to protect it against rain or dew. The laws stipulate that the regulations on covering the pitch shall be agreed by both captains in advance. The decision concerning whether to cover the pitch greatly affects how the ball will react to the pitch surface, as a ball bounces differently on wet ground as compared to dry ground. The area beyond the pitch where a bowler runs so as to deliver the ball (the 'run-up') should ideally be kept dry so as to avoid injury through slipping and falling, and the Laws also require these to be covered wherever possible when there is wet weather.
Structure of the game
Laws 12 to 17 outline the structure of the game.
Law 12: InningsAn inning, or innings, is a fixed-length segment of a game in any of a variety of sports – most notably cricket and baseball during which one team attempts to score while the other team attempts to prevent the first from scoring. In cricket, the term innings is both singular and plural and is...
. Before the game, the teams agree whether it is to be over one or two innings, and whether either or both innings are to be limited by time or by overs. In practice, these decisions are likely to be laid down by Competition Regulations, rather than pre-game agreement. In two-innings games, the sides bat alternately unless the follow-on (law 13) is enforced. An innings is closed once all batsmen are dismissed, no further batsmen are fit to play, the innings is declared or forfeited by the batting captain, or any agreed time or over limit is reached. The captain winning the toss of a coin decides whether to bat or to bowl first.
Law 13: The follow-onFollow-on is a term used in the sport of cricket to describe a situation where the team that bats second is forced to take its second batting innings immediately after its first, because the team was not able to get close enough to the score achieved by the first team batting in the first innings...
. In a two innings match, if the side batting second scores substantially fewer runs than the side batting first, the side that batted first can force their opponents to bat again immediately. The side that enforced the follow-on risks not getting to bat again and thus the chance of winning. For a game of five or more days, the side batting first must be at least 200 runs ahead to enforce the follow-on; for a three- or four-day game, 150 runs; for a two-day game, 100 runs; for a one-day game, 75 runs. The length of the game is determined by the number of scheduled days play left when the game actually begins.
Law 14: Declaration and forfeitureIn the sport of cricket a declaration occurs when a captain declares his team's innings closed and a forfeiture is when a captain chooses to forfeit an innings. Declaration and forfeiture are covered in Law 14 of the Laws of cricket...
. The batting captain can declare an innings closed at any time when the ball is dead. He may also forfeit his innings before it has started.
Law 15: IntervalsGames in the sport of cricket are played over a number of hours or days, making it one of the sports with the longest playing time, though sailing, yachting, road cycling and rallying are sometimes longer. Typically, first-class cricket matches are played over three to five days with at least six...
. There are intervals between each day's play, a ten-minute interval between innings, and lunch, tea and drinks intervals. The timing and length of the intervals must be agreed before the match begins. There are also provisions for moving the intervals and interval lengths in certain situations, most notably the provision that if nine wickets are down, the tea interval is delayed to the earlier of the fall of the next wicket and 30 minutes elapsing.
Law 16: Start of play; cessation of playGames in the sport of cricket are played over a number of hours or days, making it one of the sports with the longest playing time, though sailing, yachting, road cycling and rallying are sometimes longer. Typically, first-class cricket matches are played over three to five days with at least six...
. Play after an interval commences with the umpire's call of "Play", and at the end of a session by "Time". The last hour of a match must contain at least 20 overs, being extended in time so as to include 20 overs if necessary.
Law 17: Practice on the field. There may be no batting or bowling practice on the pitch except before the day's play starts and after the day's play has ended. Bowlers may only have trial run-ups if the umpires are of the view that it would waste no time.
Scoring and winning
The laws then move on to discuss how runs can be scored and how one team can beat the other.
Law 18: Scoring runsIn the sport of cricket, a run is the basic unit of scoring. Runs are scored by a batsman, and the aggregate of the scores of a team's batsmen constitutes the team's score. A batsman scoring 50 or 100 runs , or any higher multiple of 50 runs, is considered a particular achievement...
. Runs are scored when the two batsmen run to each other's end of the pitch. Several runs can be scored from one ball.
Law 19: BoundariesBoundary has two distinct meanings in the sport of cricket:# the edge or boundary of the playing field, and# a manner of scoring runs.-Edge of the field:...
. A boundary is marked round the edge of the field of play. If the ball is hit into or past this boundary, four runs are scored, or six runs if the ball didn't hit the ground before crossing the boundary.
Law 20: Lost ballIn the sport of cricket, if a ball in play cannot be found or recovered, any fielder may call Lost ball. The game then proceeds as described in Law 20 of the Laws of cricket.This Law prescribes that the ball immediately ceases to be in play...
. If a ball in play is lost or cannot be recovered, the fielding side can call "lost ball". The batting side keeps any penalty runs (such as no-balls and wides) and scores the higher of six runs and the number of runs actually run.
Law 21: The resultThe result in a game of cricket may be a win for one of the two teams playing, a draw or a tie. In the case of a limited overs game, the game can also end with no result...
. The side which scores the most runs wins the match. If both sides score the same number of runs, the match is tied. However, the match may run out of time before the innings have all been completed. In this case, the match is drawn.
Law 22: The overIn the sport of cricket, an over is a set of six consecutive balls bowled in succession. An over is normally bowled by a single bowler. However, in the event of injury preventing a bowler from completing an over, it is completed by a teammate....
. An over consists of six balls bowled, excluding wides and no balls. Consecutive overs are delivered from opposite ends of the pitch. A bowler may not bowl two consecutive overs.
Law 23: Dead ball. The ball comes into play when the bowler begins his run up, and becomes dead when all the action from that ball is over. Once the ball is dead, no runs can be scored and no batsmen can be dismissed. The ball becomes dead for a number of reasons, most commonly when a batsman is dismissed, when a boundary is hit, or when the ball has finally settled with the bowler or wicketkeeper.
Law 24: No ballIn the sport of cricket a no ball is a penalty against the fielding team, usually as a result of an illegal delivery by the bowler. The delivery of a no ball results in one run to be added to the batting team's score, and an additional ball must be bowled...
. A ball can be a no ball for several reasons: if the bowler bowls from the wrong place; or if he straightens his elbow during the delivery; or if the bowling is dangerous; or if the ball bounces more than twice or rolls along the ground before reaching the batsman; or if the fielders are standing in illegal places. A no ball adds one run to the batting team's score, in addition to any other runs which are scored off it, and the batsman can't be dismissed off a no ball except by being run out, or by handling the ball, hitting the ball twice, or obstructing the field.
Law 25: Wide ball. An umpire calls a ball "wide" if, in his or her opinion, the batsman did not have a reasonable opportunity to score off the ball. A ball is called wide when the bowler bowls a bouncer that goes over the head of the batsman. A wide adds one run to the batting team's score, in addition to any other runs which are scored off it, and the batsman can't be dismissed off a wide except by being run out or stumped, or by handling the ball, hitting his wicket, or obstructing the field.
Law 26: ByeIn the sport of cricket, a bye is a run scored by the batting team when the ball has not been hit by the batsman and the ball has not hit the batsman's body.-Scoring byes:...
and Leg byeIn the sport of cricket, a leg bye is a run scored by the batting team when the batsman has not hit the ball with his bat, but the ball has hit the batsman's body or protective gear.-Scoring leg byes:...
. If a ball that is not a no ball or wide passes the striker and runs are scored, they are called byes. If a ball that is not a no ball hits the striker but not the bat and runs are scored, they are called leg-byes. However, leg-byes cannot be scored if the striker is neither attempting a stroke nor trying to avoid being hit. Byes and leg-byes are credited to the team's but not the batsman's total.
Mechanics of dismissal
Laws 27 to 29 discuss the main mechanics of how a batsman may be dismissed.
Law 27: AppealsIn the sport of cricket, an appeal is the act of a player on the fielding team asking an umpire for a decision regarding whether a batsman is out or not. According to the Laws of Cricket, an umpire may not rule a batsman out unless the fielding side appeals...
. If the fielders believe a batsman is out, they may ask the umpire "How's That?", commonly shouted emphatically with arms raised, before the next ball is bowled. The umpire then decides whether the batsman is out. Strictly speaking, the fielding side must appeal for all dismissals, including obvious ones such as
bowledBowled is a method of dismissing a batsman in the sport of cricket. This method of dismissal is covered by Law 30 of the Laws of cricket.A batsman is out bowled if his wicket is put down by a ball delivered by the bowler...
. However, a batsman who is obviously out will normally leave the pitch without waiting for an appeal or a decision from the umpire.
Law 28: The wicket is down. Several methods of being out occur when the wicket is put down. This means that the wicket is hit by the ball, or the batsman, or the hand in which a fielder is holding the ball, and at least one bail is removed.
Law 29: Batsman out of his ground. The batsmen can be run out or stumped if they are out of their ground. A batsman is in his ground if any part of him or his bat is on the ground behind the popping crease. If both batsman are in the middle of the pitch when a wicket is put down, the batsman closer to that end is out.
Ways to get out
Laws 30 to 39 discuss the various ways a batsman may be dismissed. In addition to these 10 methods, a batsman may retire out. That provision is in Law 2. Of these, caught is generally the commonest, followed by
bowledBowled is a method of dismissing a batsman in the sport of cricket. This method of dismissal is covered by Law 30 of the Laws of cricket.A batsman is out bowled if his wicket is put down by a ball delivered by the bowler...
,
leg before wicketIn the sport of cricket, leg before wicket is one of the ways in which a batsman can be dismissed. An umpire will rule a batsman out LBW under a series of circumstances which primarily include the ball striking the batsman's body when it would otherwise have continued on to hit the batsman's...
,
run outRun out is a method of dismissal in the sport of cricket. It is governed by Law 38 of the Laws of cricket.-The rules:A batsman is out Run out if at any time while the ball is in play no part of his bat or person is grounded behind the popping crease and his wicket is fairly put down by the opposing...
and stumped. The other forms of dismissal are very rare.
Law 30: BowledBowled is a method of dismissing a batsman in the sport of cricket. This method of dismissal is covered by Law 30 of the Laws of cricket.A batsman is out bowled if his wicket is put down by a ball delivered by the bowler...
. A batsman is out if his wicket is put down by a ball delivered by the bowler. It is irrelevant whether the ball has touched the bat, glove, or any part of the batsman before going on to put down the wicket, though it may not touch another player or an umpire before doing so.
Law 31: Timed outTimed out is a method of dismissal in the sport of cricket. It occurs when an incoming batsman is not ready to play within three minutes of the previous batsman being out...
. An incoming batsman must be ready to face a ball (or be at the crease with his partner ready to face a ball) within 3 minutes of the outgoing batsman being dismissed, otherwise the incoming batsman will be out.
Law 32: Caught. If a ball hits the bat or the hand holding the bat and is then caught by the opposition within the field of play before the ball bounces, then the batsman is out.
Law 33: Handled the ballHandled the ball is a method of dismissal in the sport of cricket.-Definition:Law 33 of the Laws of cricket provides that:"Either batsman is out Handled the ball if he wilfully touches the ball while in play with a hand or hands not holding the bat unless he does so with the consent of the opposing...
. If a batsman willfully handles the ball with a hand that is not touching the bat without the consent of the opposition, he is out.
Law 34: Hit the ball twiceHit the ball twice, or "double-hit", is a method of dismissal in the sport of cricket.-Definition:Law 34 of the Laws of cricket states:Law 34 1...
. If a batsman hits the ball twice, other than for the sole purpose of protecting his wicket or with the consent of the opposition, he is out.
Law 35: Hit wicketHit wicket is a method of dismissal in the sport of cricket. This method of dismissal is governed by Law 35 of the laws of cricket. The striker is out "hit wicket" if, after the bowler has entered his delivery stride and while the ball is in play, his wicket is put down by his bat or his person...
. If, after the bowler has entered his delivery stride and while the ball is in play, a batsman puts his wicket down by his bat or his body he is out. The striker is also out hit wicket if he puts his wicket down by his bat or his body in setting off for a first run. "Body" includes the clothes and equipment of the batsman.
Law 36: Leg before wicketIn the sport of cricket, leg before wicket is one of the ways in which a batsman can be dismissed. An umpire will rule a batsman out LBW under a series of circumstances which primarily include the ball striking the batsman's body when it would otherwise have continued on to hit the batsman's...
(LBW). If the ball hits the batsman without first hitting the bat, but would have hit the wicket if the batsman was not there, and the ball does not pitch on the leg side of the wicket, the batsman will be out. However, if the ball strikes the batsman outside the line of the off-stump, and the batsman was attempting to play a stroke, he is not out.
Law 37: Obstructing the fieldObstructing the field is a rare method of dismissal in the sport of cricket.-Definition:Law 37 of the Laws of cricket provides that:"Either batsman is out Obstructing the field if he wilfully obstructs or distracts the opposing side by word or action...
. If a batsman willfully obstructs the opposition by word or action, he is out.
Law 38: Run outRun out is a method of dismissal in the sport of cricket. It is governed by Law 38 of the Laws of cricket.-The rules:A batsman is out Run out if at any time while the ball is in play no part of his bat or person is grounded behind the popping crease and his wicket is fairly put down by the opposing...
. A batsman is out if at any time while the ball is in play no part of his bat or person is grounded behind the popping crease and his wicket is fairly put down by the opposing side.
Law 39: StumpedStump is a term used in the sport of cricket where it has three different meanings:# part of the wicket# a manner of dismissing a batsman# the end of the day's play .-Part of the wicket:...
. A batsman is out when the wicket-keeper (see Law 40) puts down the wicket, while the batsman is out of his crease and not attempting a run.
Fielders
Law 40: The wicket-keeperThe wicket-keeper in the sport of cricket is the player on the fielding side who stands behind the wicket or stumps being guarded by the batsman currently on strike...
. The keeper is a designated man from the bowling side allowed to stand behind the stumps of the batsman. He is the only player from his side allowed to wear gloves and external leg guards.
Law 41: The fielderFielding in the sport of cricket is the action of fielders in collecting the ball after it is struck by the batsman, in such a way as to either limit the number of runs that the batsman scores or get the batsman out by catching the ball in flight or running the batsman out.Cricket fielding position...
. A fielder is any of the eleven cricketers from the bowling side. Fielders are positioned to field the ball, to stop runs and boundaries, and to get batsmen out by catching or running them out.
Appendices
The five appendices to the laws, are as follows:
- Appendix A: Specifications and diagrams of stumps and bails
In the sport of cricket the word wicket has several distinct meanings:-Definitions of wicket:Most of the time, the wicket is one of the two sets of three stumps and two bails at either end of the pitch...
- Appendix B: Specifications and diagrams of the pitch and creases
In the game of cricket, the cricket pitch consists of the central strip of the cricket field between the wickets - 1 chain or 22 yards long and 10 feet wide. The surface is very flat and normally covered with extremely short grass though this grass is soon removed by wear at the ends of the...
- Appendix C: Specifications and diagrams of gloves
The wicket-keeper in the sport of cricket is the player on the fielding side who stands behind the wicket or stumps being guarded by the batsman currently on strike...
- Appendix D: Definitions
- Appendix E: The bat
A cricket bat is a specialised piece of equipment used by batsmen in the sport of cricket to hit the ball. It is usually made of willow wood. Its use is first mentioned in 1624....
External links