The Konica FT-1 was the last SLR

Single-lens reflex camera

A single-lens reflex camera is a camera that typically uses a semi-automatic moving mirror system that permits the photographer to see exactly what will be captured by the film or digital imaging system, as opposed to pre-SLR cameras where the view through the viewfinder could be significantly...

 to be built both under the Konica

Konica

was a Japanese manufacturer of, among other products, film, film cameras, camera accessories, photographic and photo-processing equipment, photocopiers, fax machines and laser printers.- History :...

 name and by Konica themselves. The FT-1 was introduced as an improvement on the earlier FS-1, changes included a different meter type (using silicon photodiode

Photodiode

A photodiode is a type of photodetector capable of converting light into either current or voltage, depending upon the mode of operation.The common, traditional solar cell used to generateelectric solar power is a large area photodiode....

 cells instead of the previously used gallium arsenide cells), improved quality of electronics, and a faster winder speed.

Various controls were moved around on the camera, including the ISO film speed

Film speed

Film speed is the measure of a photographic film's sensitivity to light, determined by sensitometry and measured on various numerical scales, the most recent being the ISO system....

setting, the on/off switch, and the self timer. Newly added features are the exposure compensation knob and a switch to toggle between continuous (up to 2 frames per second) and single shot exposures.

It also came available with multi accessories: push button remote control up to 200 ft., less than 1 lux capture shutter, auto-manual,