Springfield Model 1871
Encyclopedia
The Springfield Model 1871 Rolling Block U.S. Army rifle was manufactured in 1871-72 by Springfield Armory
, using the design originated by Remington Arms Company, under a royalty agreement.
action. The Remingtons continued to invest in Rider's work, and met with Ordnance Department officials in the hope of interesting them in this new design. The U.S. Navy Ordnance Department became interested in the design, and purchased several different models of rifles from 1867 through 1869. Field trials of these various rifles yielded mostly positive results.
In 1869, the Navy Bureau of Ordinance tested many different weapons, and settled on the .50 caliber Remington Rolling Block for use by both the U.S. Navy and the U.S. Marines. An order was placed for 10,000 Model 1870
rifles. After the rifles were produced, Navy inspectors realized that the rear sights had been positioned incorrectly, and were dangerously close to the chamber, making the weapon unsafe for use. All 10,000 rifles were rejected, and were subsequently sold to France for use in the Franco-Prussian War
. The sale of the defective rifles enabled enough funds to be recovered that the Navy Ordnance Department ordered an additional 12,000 rifles.
Over 20,000 Model 1871 rifles were eventually purchased by the state of New York. The U.S. Army did not greet the Remingtons with much enthusiasm. Foreign sales of the weapon were much more successful. Denmark ordered many of the Model 1870 and 1871 rifles. In 1873, Spain ordered 50,000 Model 1871 rifles, which were delivered in 1875. Numerous other countries, such as France, Chile, Argentina, Cuba, Greece, and Puerto Rico also purchased this rifle.
Springfield Armory
The Springfield Armory, located in the City of Springfield, Massachusetts - from 1777 until its closing in 1968 - was the primary center for the manufacture of U.S. military firearms. After its controversial closing during the Vietnam War, the Springfield Armory was declared Western Massachusetts'...
, using the design originated by Remington Arms Company, under a royalty agreement.
Origin
During the U.S. Civil War, Joseph Rider experimented with several breech loading weapon designs. In 1865, he was issued the first patent for what would evolve into the Remington rolling blockRolling block
A rolling block is a form of firearm action where the sealing of the breech is done with a specially shaped breechblock able to rotate on a pin. The breechblock is shaped like a section of a circle....
action. The Remingtons continued to invest in Rider's work, and met with Ordnance Department officials in the hope of interesting them in this new design. The U.S. Navy Ordnance Department became interested in the design, and purchased several different models of rifles from 1867 through 1869. Field trials of these various rifles yielded mostly positive results.
In 1869, the Navy Bureau of Ordinance tested many different weapons, and settled on the .50 caliber Remington Rolling Block for use by both the U.S. Navy and the U.S. Marines. An order was placed for 10,000 Model 1870
Springfield Model 1870 Remington-Navy
The Springfield Rolling Block U.S. Navy Rifle was a shipboard small arm for use by the United States Navy, employing the Remington Arms Company rolling block design, and manufactured under a royalty agreement with Remington.-Origin:...
rifles. After the rifles were produced, Navy inspectors realized that the rear sights had been positioned incorrectly, and were dangerously close to the chamber, making the weapon unsafe for use. All 10,000 rifles were rejected, and were subsequently sold to France for use in the Franco-Prussian War
Franco-Prussian War
The Franco-Prussian War or Franco-German War, often referred to in France as the 1870 War was a conflict between the Second French Empire and the Kingdom of Prussia. Prussia was aided by the North German Confederation, of which it was a member, and the South German states of Baden, Württemberg and...
. The sale of the defective rifles enabled enough funds to be recovered that the Navy Ordnance Department ordered an additional 12,000 rifles.
Production
Following the success of the Model 1870, the Governor of New York ordered 15,000 Remington rolling block rifles and bayonets for his state's National Guard. These model 1871 rifles were very similar to the Model 1870 rifles, but differed in some details. Field experience with the Model 1870 showed that the mechanism jammed too easily in dusty conditions. Users also did not like loading the weapon at full cock. The Model 1871 included a locking bolt in the breech mechanism. The user pulled the hammer to the full cock position, retracted the breech block spur to expose the chamber, and inserted the cartridge. When the breech block closed, the hammer automatically fell to the half cock position, and the weapon could not be fired until the hammer was once again pulled to the full cock position.Over 20,000 Model 1871 rifles were eventually purchased by the state of New York. The U.S. Army did not greet the Remingtons with much enthusiasm. Foreign sales of the weapon were much more successful. Denmark ordered many of the Model 1870 and 1871 rifles. In 1873, Spain ordered 50,000 Model 1871 rifles, which were delivered in 1875. Numerous other countries, such as France, Chile, Argentina, Cuba, Greece, and Puerto Rico also purchased this rifle.