All Topics  
SOS

 

   Email Print
   Bookmark   Link






 

SOS



 
 
SOS is the commonly used description for the international Morse code
Morse code

Morse code is a type of character encoding that transmits telegraphic information using rhythm. Morse code uses a standardized sequence of short and long elements to represent the alphanumeric, punctuation and special characters of a given message....
 distress signal
Distress signal

A distress signal is an internationally recognized means for obtaining Helpfulness. Distress signals take the form of or are commonly made by using radio signals, displaying a visually detected item or illumination , or making an audible sound, from a distance....
  (· · · — — — · · ·). This distress signal was first adopted by the German government in radio
Radio

Radio is the transmission of signals, by modulation of electromagnetic radiation with frequency below those of visible light.Electromagnetic radiation radio propagation by means of oscillating electromagnetic fields that pass through the air and the vacuum of space....
 regulations effective April 1, 1905, and became the worldwide standard under the second International Radiotelegraphic Convention, which was signed on November 3, 1906 and became effective on July 1, 1908.






Discussion
Ask a question about 'SOS'
Start a new discussion about 'SOS'
Answer questions from other users
Full Discussion Forum



Recent Posts









Encyclopedia


SOS is the commonly used description for the international Morse code
Morse code

Morse code is a type of character encoding that transmits telegraphic information using rhythm. Morse code uses a standardized sequence of short and long elements to represent the alphanumeric, punctuation and special characters of a given message....
 distress signal
Distress signal

A distress signal is an internationally recognized means for obtaining Helpfulness. Distress signals take the form of or are commonly made by using radio signals, displaying a visually detected item or illumination , or making an audible sound, from a distance....
  (· · · — — — · · ·). This distress signal was first adopted by the German government in radio
Radio

Radio is the transmission of signals, by modulation of electromagnetic radiation with frequency below those of visible light.Electromagnetic radiation radio propagation by means of oscillating electromagnetic fields that pass through the air and the vacuum of space....
 regulations effective April 1, 1905, and became the worldwide standard under the second International Radiotelegraphic Convention, which was signed on November 3, 1906 and became effective on July 1, 1908. SOS remained the maritime radio distress signal until 1999, when it was replaced by the Global Maritime Distress Safety System
Global Maritime Distress Safety System

The Global Maritime Distress Safety System is an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols used to increase safety and make it easier to rescue distressed ships, boats and aircraft....
. SOS is still recognized as a visual distress signal.

From the beginning, the SOS distress signal has actually consisted of a continuous sequence of three-dits
Morse code

Morse code is a type of character encoding that transmits telegraphic information using rhythm. Morse code uses a standardized sequence of short and long elements to represent the alphanumeric, punctuation and special characters of a given message....
/three-dahs
Morse code

Morse code is a type of character encoding that transmits telegraphic information using rhythm. Morse code uses a standardized sequence of short and long elements to represent the alphanumeric, punctuation and special characters of a given message....
/three-dits, all run together without letter spacing. In International Morse Code, three dits form the letter S, and three dahs make the letter O, so "SOS" became an easy way to remember the correct order of the dits and dahs. In modern terminology, SOS is a Morse "procedural signal
Prosigns for Morse Code

In Morse code, prosigns or procedural signals are dot/dash sequences that have a special meaning in a transmission: they are a form of control character....
" or "prosign", and the formal way to write it is with a bar above the letters, i.e. SOS.

In popular usage, SOS became associated with phrases such as "Save Our Seamen", "Survivors On Shore" or "Save Our Skins". These were a later development, most likely used to help remember the correct letters (something known as a backronym
Backronym

A backronym is a reverse Acronym and initialism, a phrase constructed after the fact to make an existing word or words into an acronym.Backronyms may be invented with serious or humorous intent, or may be a type of false or folk etymology....
).

Formalization

The use of the SOS signal was first introduced in Germany as part of a set of national radio regulations, effective April 1, 1905. These regulations introduced three new Morse code sequences, including the SOS distress signal:
  1. Ruhezeichen ("Cease-sending signal"), consisting of six dahs ( — — — — — — ), sent by shore stations to tell other local stations to stop transmitting.
  2. Suchzeichen ("Quest signal"), composed of three-dits/three dahs/one-dit, all run together (· · · — — — · ), used by ships to get the attention of shore stations.
  3. Notzeichen ("Distress signal"), consisting of three-dits/three-dahs/three-dits (· · · — — — · · · ), also in a continuous sequence, to be repeated by a ship in distress until all other stations have stopped.


SOS was developed from the general German radio call "SOE", with the 3 dits of a "S" easier to hear in under noisy conditions than the one dit of an "E". Also, the otherwise meaningless string of letterman was selected because it is easily recognizable and can be sent rapidly. Comparing SOS (di-di-di-dah-dah-dah-di-di-dit) with the older CQD (dah-di-dah-dit dah-dah-di-dah dah-di-dit) (— · — · / — — · — / — · ·) it is obvious how much simpler the new code was. Also, it would not be mistaken for CQ, the radio code for "calling anyone" used in casual circumstances.

In 1906, at the second International Radiotelegraphic Convention in Berlin, an extensive collection of Service Regulations was developed to supplement the main agreement, which was signed on November 3, 1906, becoming effective on July 1, 1908. Article XVI of the regulations adopted Germany's Notzeichen distress signal as the international standard, reading: "Ships in distress shall use the following signal: · · · — — — · · ·  repeated at brief intervals". The first ship to transmit an SOS distress call appears to have been the Cunard liner Slavonia on June 10, 1909, according to "Notable Achievements of Wireless" in the September, 1910 Modern Electrics. However, there was some resistance among the Marconi operators to the adoption of the new signal, and, as late as the April, 1912 sinking of the , the ship's Marconi operators intermixed CQD and SOS distress calls. However, in the interests of consistency and public safety, the use of CQD appears to have died out after this point.

In both the April 1, 1905 German law, and the 1906 International regulations, the distress signal was specified as a continuous Morse code sequence of three-dits/three-dahs/three-dits, with no mention of any alphabetic equivalents. However, in International Morse, three dits comprise the letter S, and three dahs the letter O. It therefore soon became common to refer to the distress signal as "SOS." An early report on "The International Radio-Telegraphic Convention" in the January 12, 1907 Electrical World stated that "Vessels in distress use the special signal, SOS, repeated at short intervals." (In American Morse code
American Morse code

American Morse Code ? also known as Railroad Morse?is the latter-day name for the original version of the Morse Code developed in the mid-1840s, by Samuel Morse and Alfred Vail for their electric telegraph....
, which was used by many coastal ships in the United States through the first part of the twentieth century, three dahs stood for the numeral "5", so in a few cases the distress signal was informally referred to as "S5S").

In contrast to CQD, which was sent as three separate letters with spaces between each letter, the SOS distress call has always been transmitted as a continuous sequence of dits-and-dahs, and not as individual letters. There was no problem as long as operators were aware that "SOS" was technically just a convenient way for remembering the proper sequence of the distress signal's total of nine dits and dahs. In later years, the number of special Morse symbols increased. In order to designate the proper sequence of dits-and-dahs for a long special symbol, the standard practice is to list alphabetic characters which contain the same dits-and-dahs in the same order, with a bar atop the character sequence to indicate that there should not be any internal spaces in the transmission. Thus, under the modern notation, the distress signal becomes SOS. (In International Morse, VTB, IJS and SMB, among others, would also correctly translate into the · · · — — — · · ·  distress call sequence, but traditionally only SOS is used).

SOS has also sometimes been used as a visual distress signal, consisting of three-short/three-long/three-short light flashes, or with "SOS" spelled out in individual letters, for example, stamped in a snowbank or formed out of logs on a beach. The fact that SOS can be read right side up as well as upside down became important for visual recognition if viewed from above.

Later developments

Additional warning and distress signals followed the introduction of SOS. On January 20, 1914, the London International Convention on Safety of Life at Sea adopted the Morse code signal TTT ( —  —  —), three letter T's (—) spaced correctly as three letters so as not to be confused with the letter O (- - -), as the "Safety Signal," used for messages to ships "involving safety of navigation and being of an urgent character." With the development of audio radio transmitters, there was a need for a spoken distress phrase, and "Mayday" was adopted by the 1927 International Radio Convention as the equivalent of SOS. For TTT the equivalent audio signals are "Pan-pan
Pan-pan

In radiotelephone communications, a call of pan-pan is used to signify that there is an urgency on board a boat, ship, aircraft or other vehicle but that, for the time being at least, there is no immediate danger to anyone's life or to the vessel itself....
" for urgency and "Securitι
Securite

When a Marine and mobile radio telephony transmission begins with "S?curit?, s?curit?, s?curit?" , it means that what follows is important safety information....
" for navigational safety. An urgency signal for safety matters was also introduced and used. This consisted of XXX sent three times in morse or when spoken, the words "Pan" repeated three times before the message.

During the Second World War, additional codes were employed to include immediate details about attacks by enemy vessels, especially in the Battle of the Atlantic. The signal SSS signalled attacked by submarines, whilst RRR warned of an attack by a surface raider, QQQ warned of an unknown raider (usually an auxiliary cruiser), and AAA indicated an attack by aircraft. They were usually sent in conjunction with the SOS distress code. All of these codes later switched from three repeats of the letter to four repeats ("RRRR", etc.).

None of these signals were used on their own. Sending SOS as well as other warning signals (TTT, XXX etc.) used similar procedures for effectiveness. These were always followed correctly. Here is an example of an SOS signal the portions in brackets are an explanation only.

SOS SOS SOS de (this is) GBTT GBTT GBTT (call sign of the QE2 repeated 3 times) Queen Elizabeth 2 (name of ship) psn (position) 49.06.30 North, 04.30.20 West. Ship on fire, crew abandoning ship (nature of distress) AR (end of transmission) K (invitation to reply).

Many merchant vessels carried only one or two radio operators in which case the SOS may not be heard by operators off duty. Eventually equipment was invented to summon off-duty operators by ringing an alarm in the operators berth. This was triggered by the operator of the ship in distress transmitting twelve long dashes of four seconds duration each. These were sent prior to the SOS hopefully ringing the automatic alarm in ships so equipped. If possible a short delay was given before transmission of the SOS proper. This was to give those off watch operators time to get to their radio office.

Famous SOS calls

(used CQD as well)
  • HMHS Britannic
    HMHS Britannic

    Ship prefix Britannic , the third and largest of the White Star Line, sister ship of and , sank in 1916 after hitting a naval mine with the loss of 30 lives....


See also

  • Call for help
  • Mayday
  • Pan-pan
    Pan-pan

    In radiotelephone communications, a call of pan-pan is used to signify that there is an urgency on board a boat, ship, aircraft or other vehicle but that, for the time being at least, there is no immediate danger to anyone's life or to the vessel itself....
  • Securite
    Securite

    When a Marine and mobile radio telephony transmission begins with "S?curit?, s?curit?, s?curit?" , it means that what follows is important safety information....
  • Vessel emergency codes
    Vessel emergency codes

    In addition to distress signals like Mayday and pan-pan, most vessels, especially passenger ships, use some emergency signals to internally alert the crew on board, and in some cases also the passengers....
  • Distress signal
    Distress signal

    A distress signal is an internationally recognized means for obtaining Helpfulness. Distress signals take the form of or are commonly made by using radio signals, displaying a visually detected item or illumination , or making an audible sound, from a distance....
  • 500 kHz
  • 2182 kHz
    2182 kHz

    The radio frequency of 2182 kHz is the International distress frequency for maritime radiotelephone communications on the marine Medium frequency bands....
  • CQD
    CQD

    CQD, transmitted in Morse code as  - ? - ?    - - ? -    - ? ?  is believed to be the first distress signal adopted for radio use....
  • GMDSS