LDE – Wurzen and Oschatz
Encyclopedia
The locomotives WURZEN and OSCHATZ were early German steam engines operated by the Leipzig-Dresden Railway (LDE) for mixed duties. They were tender locomotives.

History

The two locomotives were delivered in 1847 by Borsig in Berlin
Berlin
Berlin is the capital city of Germany and is one of the 16 states of Germany. With a population of 3.45 million people, Berlin is Germany's largest city. It is the second most populous city proper and the seventh most populous urban area in the European Union...

 to the LDE.

The engines were retired between 1870 and 1874.

Technical features

The boiler
Boiler
A boiler is a closed vessel in which water or other fluid is heated. The heated or vaporized fluid exits the boiler for use in various processes or heating applications.-Materials:...

 was of rivetted construction and comprised several sections. The outer firebox was topped with a semi-circular dome that extended forward over the boiler barrel and acted as a steam collection space. In addition there was a steam dome
Steam dome
A Steam dome is a vessel fitted to the top of the boiler of a steam locomotive. It contains the opening to the main steam pipe and its purpose is to allow this opening to be kept well above the water level in the boiler...

 on the front section of the boiler. The two spring balance safety valves were located on the outer firebox.

The steam cylinders were located on the outside, unlike those on English locomotives, which avoided the need for a crank axle that would have been expensive and difficult to manufacture. The engine drove the second coupled axle. The steam engine was equipped with inside Borsig double valve gear
Valve gear
The valve gear of a steam engine is the mechanism that operates the inlet and exhaust valves to admit steam into the cylinder and allow exhaust steam to escape, respectively, at the correct points in the cycle...

 driven via two eccentric cams.

The locomotives did not have their own braking equipment. Braking could only be achieved using the hand-operated screw brake on the tender.

In 1850 the locomotives were given Kirchweger condenser
Kirchweger condenser
The purpose of the Kirchweger condenser was to preheat feedwater in a steam locomotive using the exhaust steam from the engine. It was invented in 1850 by Heinrich Kirchweger...

s to pre-heat the feedwater. An external feature of that is the second chimney on the tender. Exhaust steam was led from the valve chest to the tender through a 100 mm connecting pipe.

See also


Sources

  • Fritz Näbrich, Günter Meyer, Reiner Preuß: Lokomotivarchiv Sachsen 1, transpress VEB Verlag für Verkehrswesen, Berlin, 1983
  • Erich Preuß, Rainer Preuß: Sächsische Staatseisenbahnen, transpress Verlagsgesellschaft mbH, Berlin, 1991, ISBN 3-344-70700-0

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK