Verbandsbauart
Encyclopedia
The German term Verbandsbauart describes both a type of goods wagon
as well as a type of tram
.
In order to standardise the goods wagons classes of the various German state railways (Länderbahnen
), the German State Railway Wagon Association
(Deutscher Staatsbahnwagenverband or DSV) issued regulations. The so-called Verbandsbauart (association) or DSV wagons, named after this association, were built from 1910 until the emergence of the Austauschbauart
(interchangeable) wagons in 1927. Externally, the Verbandsbauart wagons looked very much like state railway goods wagons, but they were equipped for considerably higher maximum loads of up to 20 tons. A total of 11 classes were defined by norms
defined by master drawings (Musterblättern). The wagons were built in numbers that today are hardly conceivable. The most important ones were the A2 and A10 Class wagons of which over 100,000 of each type were built. The Om Class A10 wagons were, including wagons of identical construction made by other nations, the most widespread goods wagons of all time and formed the major part of the German goods wagon fleet until the 1950s. Only then did they slowly disappear from the tracks. Many were also modified as part of the German goods wagon reconstruction programme.
The other meaning of the term is used for one of the tram classes that arose after Second World War in West Germany. The Verband wagons succeeded the rebuilt, war-damaged trams and were built to guidelines issued by the Association of Public Transport Companies (Verband öffentlicher Verkehrsbetriebe, VÖV).
Goods wagon
Goods wagons are railway wagons that are used for the transportation of goods .- Development :At the beginning of the railway era, the vast majority of goods wagons were four-wheeled vehicles of simple construction. These were almost exclusively small covered wagons, open wagons with side-boards,...
as well as a type of tram
Tram
A tram is a passenger rail vehicle which runs on tracks along public urban streets and also sometimes on separate rights of way. It may also run between cities and/or towns , and/or partially grade separated even in the cities...
.
In order to standardise the goods wagons classes of the various German state railways (Länderbahnen
Länderbahnen
The German term Länderbahnen generally refers to the state railways of the German Empire in the period from about 1840 to 1920 when they were merged into the Deutsche Reichsbahn after the First World War....
), the German State Railway Wagon Association
German State Railway Wagon Association
The German State Railway Wagon Association was an association of the German state railways Länderbahnen founded in 1909. The purpose of the association was to guarantee the unrestricted exchange of goods wagons between the member railway administrations...
(Deutscher Staatsbahnwagenverband or DSV) issued regulations. The so-called Verbandsbauart (association) or DSV wagons, named after this association, were built from 1910 until the emergence of the Austauschbauart
Austauschbauart
The so-called Austauschbauart wagons were German railway vehicles produced from the late 1920s onwards which had common components built to agreed standards.-Origin of the concept:...
(interchangeable) wagons in 1927. Externally, the Verbandsbauart wagons looked very much like state railway goods wagons, but they were equipped for considerably higher maximum loads of up to 20 tons. A total of 11 classes were defined by norms
German state railway norms
In German railway engineering, norms are standards for the design and production of railway vehicles.In the 1880s and 1890s, Prussian norms were developed for the locomotives, tenders and wagons of the Prussian state railways under the direction of the railway director responsible for railway...
defined by master drawings (Musterblättern). The wagons were built in numbers that today are hardly conceivable. The most important ones were the A2 and A10 Class wagons of which over 100,000 of each type were built. The Om Class A10 wagons were, including wagons of identical construction made by other nations, the most widespread goods wagons of all time and formed the major part of the German goods wagon fleet until the 1950s. Only then did they slowly disappear from the tracks. Many were also modified as part of the German goods wagon reconstruction programme.
The other meaning of the term is used for one of the tram classes that arose after Second World War in West Germany. The Verband wagons succeeded the rebuilt, war-damaged trams and were built to guidelines issued by the Association of Public Transport Companies (Verband öffentlicher Verkehrsbetriebe, VÖV).
See also
- History of rail transport in GermanyHistory of rail transport in GermanyGerman Railway history began with the opening of the steam-hauled Bavarian Ludwig Railway between Nuremberg and Fürth on 7 December 1835. This had been preceded by the opening of the horse-hauled Prince William Railway on 20 September 1831...
- LänderbahnenLänderbahnenThe German term Länderbahnen generally refers to the state railways of the German Empire in the period from about 1840 to 1920 when they were merged into the Deutsche Reichsbahn after the First World War....
- Deutsche Reichsbahn-GesellschaftDeutsche Reichsbahn-GesellschaftThe Deutsche Reichsbahn – was the name of the German national railway created from the railways of the individual states of the German Empire following the end of World War I....
- The table of standard state railway vehiclesGerman state railway normsIn German railway engineering, norms are standards for the design and production of railway vehicles.In the 1880s and 1890s, Prussian norms were developed for the locomotives, tenders and wagons of the Prussian state railways under the direction of the railway director responsible for railway...
, which includes the 11 DSV wagons.
External links
- There is an English-language discussion forum at Railways of Germany