SSPA
Encyclopedia

See also

  • Block upconverter
    Block upconverter
    A block upconverter is used in the transmission of satellite signals. It converts a band of frequencies from a lower frequency to a higher frequency. Modern BUCs convert from the L band to Ku band, C band and Ka band...

     (BUC)
  • Orthomode transducer
    Orthomode transducer
    An orthomode transducer is a microwave duct component of the class of microwave circulators. It is commonly referred to as an OMT, and commonly referred as a polarisation duplexer. Such device may be part of a VSAT antenna feed Orthomode transducers serve either to combine or to separate two...

     (OMT)
  • Signal-to-noise ratio
    Signal-to-noise ratio
    Signal-to-noise ratio is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. It is defined as the ratio of signal power to the noise power. A ratio higher than 1:1 indicates more signal than noise...

  • Bias tee
    Bias tee
    A bias tee is a three port network used for setting the DC bias point of some electronic components without disturbing other components. The bias tee is a diplexer. The low frequency port is used to set the bias; the high frequency port passes the radio frequency signals but blocks the biasing...

  • Duo LNB
    Duo LNB
    A Duo LNB is a double low noise block-downconverter developed by SES Astra for the simultaneous reception of satellite television signals from both the Astra 23.5°E and Astra 19.2°E satellite positions....

  • Low noise amplifier (LNA)
  • Transmit and receive integrated assembly (TRIA)
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK