Rhymney Railway R class
Encyclopedia
The Rhymney R class was a class of 0-6-2T steam locomotive
introduced into traffic in 1907 designed by the railway's engineer Hurry Riches. These were substantial sized tank locomotive
s, and weighed 67 tons (62 tons after rebuilding) and were 37 feet in length.
There were initially three locos in the class augmented to five in 1909. They were built by Robert Stephenson
, though in 1921 Hudswell Clarke
built four and Beyer, Peacock and Company
contributed a further six.
The R class and related 1904-introduced M and 1910 A classes were successful designs ideally suited to hauling heavy coal trains a relatively short distance. In 1926, No 17 was reboilered by the GWR and in this form was visually almost indistinguishable from the GWR 5600 Class
.
Thus the R (and closely related "Stephenson" M class
, A, A1
and larger wheeled P
classes) were designed for work on the Rhymney Railway, replacing smaller locomotives. When the smaller railway companies were forcibly merged into the GWR
, these modern 0-6-2's were in generally good order (some were a few months old) and had proved successful. Collectively they became the blueprint for the 200 strong 5600 class.
The design of the 5600 class followed the Rhymney designs quite closely but adopted GWR practice as far as possible, by utilising many standardized
parts. Included in Collett’s innovations was a standard number 2 boiler
which was suitable for the 5600 (and the M and R class Rhymney locomotives), complete with the traditional copper GWR safety valve casing and copper-capped chimney. Some A and P classes were also rebuilt but used the slightly shorter standard number 10 boiler, also to good effect.
Five R class locos were upgraded from 1926 onwards. All told sixteen "Stephenson" locos were similarly dealt with between 1926 and 1949.
seem to have had a particular liking for the 0-6-2T type. This was because the nature of the work they undertook demanded high adhesive weight, plenty of power with good braking ability, but no need for outright speed, nor large tanks or bunker as the distances from pit to port were short. These Welsh locomotives were taken over by the GWR at the grouping
in 1923 and many including seventeen of the Rhymney A, M, P and R's were rebuilt
with GWR taper boilers. All the Rhymney Stevenson derived locos passed into British Railways (BR) ownership in 1948. Others included (with some gaps in numbering):
For further information on these pre-grouping locomotives see Locomotives of the Great Western Railway
.
Steam locomotive
A steam locomotive is a railway locomotive that produces its power through a steam engine. These locomotives are fueled by burning some combustible material, usually coal, wood or oil, to produce steam in a boiler, which drives the steam engine...
introduced into traffic in 1907 designed by the railway's engineer Hurry Riches. These were substantial sized tank locomotive
Tank locomotive
A tank locomotive or tank engine is a steam locomotive that carries its water in one or more on-board water tanks, instead of pulling it behind it in a tender. It will most likely also have some kind of bunker to hold the fuel. There are several different types of tank locomotive dependent upon...
s, and weighed 67 tons (62 tons after rebuilding) and were 37 feet in length.
There were initially three locos in the class augmented to five in 1909. They were built by Robert Stephenson
Robert Stephenson
Robert Stephenson FRS was an English civil engineer. He was the only son of George Stephenson, the famed locomotive builder and railway engineer; many of the achievements popularly credited to his father were actually the joint efforts of father and son.-Early life :He was born on the 16th of...
, though in 1921 Hudswell Clarke
Hudswell Clarke
Hudswell, Clarke and Company Limited was an engineering and locomotive building company in Jack Lane, Hunslet, Leeds, West Yorkshire, England.-History:...
built four and Beyer, Peacock and Company
Beyer, Peacock and Company
Beyer, Peacock and Company was an English railway Locomotive manufacturer with a factory in Gorton, Manchester. Founded by Charles Beyer and Richard Peacock, it traded from 1854 until 1966...
contributed a further six.
| Year | RR class | RR Nos. | Builder | Builder Nos. | GWR/BR Nos. |
|---|---|---|---|---|---|
| 1907 | R | 1–3 | Robert Stephenson & Co. | 3288–3290 | 30–32 |
| 1909 | R | 17, 97 | Robert Stephenson & Co. | 3370–3371 | 34, 46 |
| 1921 | R1 | 39–42 | Hudswell Clarke Hudswell Clarke Hudswell, Clarke and Company Limited was an engineering and locomotive building company in Jack Lane, Hunslet, Leeds, West Yorkshire, England.-History:... |
1431–1432, 1438–1439 | 35–38 |
| 1921 | R1 | 43–47, 62 | Beyer, Peacock & Co. | 6099–6104 | 39–44 |
The R class and related 1904-introduced M and 1910 A classes were successful designs ideally suited to hauling heavy coal trains a relatively short distance. In 1926, No 17 was reboilered by the GWR and in this form was visually almost indistinguishable from the GWR 5600 Class
GWR 5600 Class
The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by C.B Collett for the Great Western Railway , and were introduced into traffic in 1924. Two hundred locomotives were built and remained in service until withdrawn by British Railways between...
.
Thus the R (and closely related "Stephenson" M class
Rhymney Railway M class
The Rhymney Railway M class was a class of 0-6-2T tank locomotive introduced into traffic on the Rhymney Railway in 1904. These were substantial sized tank engines, and weighed 66 tons and were in length....
, A, A1
Rhymney Railway A class
The Rhymney Railway A class were 0-6-2T tank locomotives introduced into traffic in 1910 and designed by the railway's engineer Hurry Riches. These were substantial sized tank engines, and weighed 64 tons and were 35' 9" in length....
and larger wheeled P
Rhymney Railway P class
The Rhymney Railway P class was a class of 0-6-2T steam locomotive introduced into traffic in 1909 designed by the Rhymney Railway's engineer C. T. Hurry Riches. These were substantial sized tank locomotives, weighed 60tons and were in length.There were initially three locos in the class...
classes) were designed for work on the Rhymney Railway, replacing smaller locomotives. When the smaller railway companies were forcibly merged into the GWR
Great Western Railway
The Great Western Railway was a British railway company that linked London with the south-west and west of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament in 1835 and ran its first trains in 1838...
, these modern 0-6-2's were in generally good order (some were a few months old) and had proved successful. Collectively they became the blueprint for the 200 strong 5600 class.
The design of the 5600 class followed the Rhymney designs quite closely but adopted GWR practice as far as possible, by utilising many standardized
Standardization
Standardization is the process of developing and implementing technical standards.The goals of standardization can be to help with independence of single suppliers , compatibility, interoperability, safety, repeatability, or quality....
parts. Included in Collett’s innovations was a standard number 2 boiler
Boiler
A boiler is a closed vessel in which water or other fluid is heated. The heated or vaporized fluid exits the boiler for use in various processes or heating applications.-Materials:...
which was suitable for the 5600 (and the M and R class Rhymney locomotives), complete with the traditional copper GWR safety valve casing and copper-capped chimney. Some A and P classes were also rebuilt but used the slightly shorter standard number 10 boiler, also to good effect.
Five R class locos were upgraded from 1926 onwards. All told sixteen "Stephenson" locos were similarly dealt with between 1926 and 1949.
Welsh 0-6-2T types
The railways of South WalesSouth Wales
South Wales is an area of Wales bordered by England and the Bristol Channel to the east and south, and Mid Wales and West Wales to the north and west. The most densely populated region in the south-west of the United Kingdom, it is home to around 2.1 million people and includes the capital city of...
seem to have had a particular liking for the 0-6-2T type. This was because the nature of the work they undertook demanded high adhesive weight, plenty of power with good braking ability, but no need for outright speed, nor large tanks or bunker as the distances from pit to port were short. These Welsh locomotives were taken over by the GWR at the grouping
Railways Act 1921
The Railways Act 1921, also known as the Grouping Act, was an enactment by the British government of David Lloyd George intended to stem the losses being made by many of the country's 120 railway companies, move the railways away from internal competition, and to retain some of the benefits which...
in 1923 and many including seventeen of the Rhymney A, M, P and R's were rebuilt
Remanufacturing
Remanufacturing is the process of disassembly and recovery at the module level and, eventually, at the component level. It requires the repair or replacement of worn out or obsolete components and modules. Parts subject to degradation affecting the performance or the expected life of the whole are...
with GWR taper boilers. All the Rhymney Stevenson derived locos passed into British Railways (BR) ownership in 1948. Others included (with some gaps in numbering):
- Brecon and Merthyr RailwayBrecon and Merthyr RailwayThe Brecon and Merthyr Junction Railway was one of several railways that served the industrial areas of South Wales and Monmouthshire. It ranked fifth amongst them in size, although hemmed in by the Taff Vale Railway and Great Western Railway...
, BR numbers 431-436 - Cardiff RailwayCardiff RailwayThe Cardiff Railway came into being from the need to service Bute Docks, so as to provide facilities for the traffic to and from the Docks. The railway was only 11 miles in length, a fact which belied its importance, since it provided both the Taff Vale Railway and the Rhymney Railway, inter alia,...
, BR number 155 - Rhymney RailwayRhymney RailwayThe Rhymney Railway was virtually a single stretch of main line, some fifty miles in length, by which the Rhymney Valley was connected to the docks at Cardiff in the county of Glamorgan, South Wales.-History:...
, BR numbers 35-83 - Taff Vale RailwayTaff Vale RailwayThe Taff Vale Railway is a railway in Glamorgan, South Wales, and is one of the oldest in Wales. It operated as an independent company from 1836 until 1922, when it became a constituent company of the Great Western Railway...
, BR numbers 204-399
For further information on these pre-grouping locomotives see Locomotives of the Great Western Railway
Locomotives of the Great Western Railway
The first Locomotives of the Great Western Railway were specified by Isambard Kingdom Brunel but Daniel Gooch was soon appointed as the railway's Locomotive Superintendent. He designed several different broad gauge types for the growing railway, such as the Firefly and later Iron Duke Class 2-2-2s...
.
External links
- Rail UK database entry for Rhymney Railway R class
- Rail UK database entry for Rhymney Railway R1 class
- http://www.greatwestern.org.uk/m_in_062.htm
- Telford Steam Railway 5619 project
- 5643
- 6695