Raindrop impressions
Encyclopedia
Raindrop impressions are a geological feature characterized by small craterlike pits with slightly raised edges that are the result of the impact of rain on sediment surfaces. Sedimentary structures
with similar appearance have been found, and cause some controversy over how they would have formed.
Raindrop impressions can appear as small craters or as small raised bumps. If the sample has craters, the top of the sample is being viewed because the rain would have fallen onto it making indentations. If the sample has small raised bumps, the bottom of the sample the bottom of the sample is being viewed. In this case, the raindrop impressions were created in the sediment, which was then followed by more sediment deposition that filled the impressions, creating, what appear to be, raised bumps on the bottom of the upper layer.
In order for raindrop impressions to be preserved in the rock record, the impression would have to have occurred towards the end of a rain shower. The decreased number of impacts at this time accounts for the scattered patterns of the impressions, and the specific saturation of the sediment allows for preservation.
It is difficult to differentiate between actual impressions made by rain and other sources such as gas bubbles escaping, or dripping from another surface, because the structures that are preserved have the same characteristics.
Sedimentary structures
Sedimentary structures are those structures formed during sediment deposition.Sedimentary structures such as cross bedding, graded bedding and ripple marks are utilized in stratigraphic studies to indicate original position of strata in geologically complex terrains and understand the depositional...
with similar appearance have been found, and cause some controversy over how they would have formed.
Description
Raindrop impressions are only a few millimeters thick and less than 1 centimeter in diameter They can be preserved as widely scattered impressions or in close proximity to one another on the sediment surface..Raindrop impressions can appear as small craters or as small raised bumps. If the sample has craters, the top of the sample is being viewed because the rain would have fallen onto it making indentations. If the sample has small raised bumps, the bottom of the sample the bottom of the sample is being viewed. In this case, the raindrop impressions were created in the sediment, which was then followed by more sediment deposition that filled the impressions, creating, what appear to be, raised bumps on the bottom of the upper layer.
Controversy
Rainfall is not the only explanation for the geological feature, and not all raindrop impressions are considered to have formed due to the impact of raindrops. Arguments against a raindrop origin include:- During shower activity raindrops cover the entire surface, whereas raindrop impressions are generally scattered and few in number.
- Because the rain is falling "everywhere," raindrop impressions should occur equally on sand-sized material as well as mud, yet in the geologic record these impressions are largely confined to fine-grained rock.
- Even when raindrop impressions form in mud during a shower, further rainfall eventually destroys them, leaving a surface which is not helpful to further preservation of impressions.
- Many examples cited as modern or fossil raindrop impressions can be explained by air bubbles rising through the mud.
- The characteristics of any impression depend on so many variables they can not be used convincingly to demonstrate those impressions formed specifically by raindrops.
In order for raindrop impressions to be preserved in the rock record, the impression would have to have occurred towards the end of a rain shower. The decreased number of impacts at this time accounts for the scattered patterns of the impressions, and the specific saturation of the sediment allows for preservation.
It is difficult to differentiate between actual impressions made by rain and other sources such as gas bubbles escaping, or dripping from another surface, because the structures that are preserved have the same characteristics.