Gibson ES-135
Encyclopedia
The Gibson ES-135 is a semi-hollow body electric guitar made by the Gibson Guitar Corporation
. Originally introduced in 1956, it was discontinued in 1958. The model, with some modifications, was reintroduced in 1991 and remained in production until 2002.
With a florentine cutaway, a trapeze tailpiece, two P-100 pickups (stacked humbuckers with P-90
covers) with two tone and volume controls and a three-way switch. It had looks and tone reminiscent of the old ES-125 TDC
, but was not a fully hollow thinline guitar, having a feedback-suppressing sustain block running under the pickups and bridge from the neck/body joint to the base of the body like the ES-335
instead, but here not made of maple but of balsa wood. The body itself and neck were again of similar construction to the ES-335, being built from laminated maple but with an unbound rosewood fingerboard with dot-style fret position markers. The metal fittings were chrome-plated, and the p-100s had black plastic "soapbar" style covers. The guitar, when launched, was the most basic and lowest-priced in the Gibson ES range, but had the same fittings, wiring and construction quality as more expensive models. At launch, Gibson claimed it was the first semi-solid electric guitar with a Florentine-style single cutaway in the world.
The ES-135 went through several changes during its production life. The P100 pickups, intended to have the tone and output of the P-90 but without the single-coil P-90's tendency to hum, did not meet with universal approval, having a slightly less biting tone and at times an equal tendency to squeal at high volumes. The use of P-100s was therefore discontinued and conventional Gibson covered humbuckers substituted. The original trapeze tailpiece gave the guitar a distinctive tone and an aggressive "bark" when played with vigour, but again was not entirely popular. The trapeze makes re-stringing a slow operation and the very long string length needed to reach from the tailpiece to the tuners meant some brands of strings did not fit.
The Gibson Guitar Corporation currently sells a similar model with more up-market appointments (neck binding and inlays) and two classic humbucking pickups, the Gibson ES-137
.
Gibson Guitar Corporation
The Gibson Guitar Corporation, formerly of Kalamazoo, Michigan and currently of Nashville, Tennessee, manufactures guitars and other instruments which sell under a variety of brand names...
. Originally introduced in 1956, it was discontinued in 1958. The model, with some modifications, was reintroduced in 1991 and remained in production until 2002.
With a florentine cutaway, a trapeze tailpiece, two P-100 pickups (stacked humbuckers with P-90
P-90
The P-90 is a single coil electric guitar pickup produced by Gibson since 1946. Having a more complex architecture and larger dimensions than Fender's single coils, it is occasionally mistaken for a humbucker.- History :...
covers) with two tone and volume controls and a three-way switch. It had looks and tone reminiscent of the old ES-125 TDC
Gibson ES-125
The Gibson ES-125 is an archtop, hollow body electric guitar model that was produced by the Gibson Guitar Corporation.-Model history:Introduced in 1941 as the successor to the ES-100, the ES-125 was an entry-level archtop electric guitar. It had one P-90 single-coil pickup in the neck position,...
, but was not a fully hollow thinline guitar, having a feedback-suppressing sustain block running under the pickups and bridge from the neck/body joint to the base of the body like the ES-335
Gibson ES-335
The Gibson ES-335 is the world's first commercial thinline arched-top semi-acoustic electric guitar. Released by the Gibson Guitar Corporation as part of its ES series in 1958, it is neither hollow nor solid; instead, a solid wood block runs through the center of its body...
instead, but here not made of maple but of balsa wood. The body itself and neck were again of similar construction to the ES-335, being built from laminated maple but with an unbound rosewood fingerboard with dot-style fret position markers. The metal fittings were chrome-plated, and the p-100s had black plastic "soapbar" style covers. The guitar, when launched, was the most basic and lowest-priced in the Gibson ES range, but had the same fittings, wiring and construction quality as more expensive models. At launch, Gibson claimed it was the first semi-solid electric guitar with a Florentine-style single cutaway in the world.
The ES-135 went through several changes during its production life. The P100 pickups, intended to have the tone and output of the P-90 but without the single-coil P-90's tendency to hum, did not meet with universal approval, having a slightly less biting tone and at times an equal tendency to squeal at high volumes. The use of P-100s was therefore discontinued and conventional Gibson covered humbuckers substituted. The original trapeze tailpiece gave the guitar a distinctive tone and an aggressive "bark" when played with vigour, but again was not entirely popular. The trapeze makes re-stringing a slow operation and the very long string length needed to reach from the tailpiece to the tuners meant some brands of strings did not fit.
The Gibson Guitar Corporation currently sells a similar model with more up-market appointments (neck binding and inlays) and two classic humbucking pickups, the Gibson ES-137
Gibson ES-137
The Gibson ES-137 is a semi-hollow-body guitar which is manufactured in Gibson's Memphis factory. It is a relatively new design in Gibson's ES line which is not based on a vintage instrument, as many of Gibson's instruments are....
.