E-OTD
Encyclopedia
E-OTD is the acronym for the Enhanced Observed Time Difference.
Enhanced Observed Time Difference (E-OTD) is a standard for the location of mobile telephones. The location method works by multilateration
. The standardisation was first carried out for GSM by the GSM standard committees (T1P1.5 and ETIS) in LCS Release 98 and Release 99. The standardisation was continued for 3G
and WCDMA mobile telephones by 3GPP.
Conceptually, the method is similar to U-TDOA
, however, it involves time difference measurements being made in the handset rather than the network, and a mechanism to pseudo-synchronise the network. The handset makes an observation of the time difference of arrival of signals from two different base stations. These observations are known as Observed Time Difference (OTD). The handset measures the OTD between a number of different base stations. If the base stations were synchronised, then a single OTD defines a hyperbolic locus. A second, independent OTD, for which one of the observed base stations is spatially distinct from those in the first OTD, would provide a second hyperbolic locus, and the intersection of the two loci gives an estimate of the location of the mobile. If more than two independent OTDs are available, then the measurements can be combined to yield a more accurate measurement.
However, GSM and 3G networks are not necessarily synchronised, so further information is needed. The E-OTD standard provides a method for pseudo-synchronisation. A Location Measurement Unit (LMU) can be used to estimate the transmission time offset between two base stations. This measurement is known as the Real Time Difference (RTD). The RTD for two base stations can then be subtracted from the OTD for the same two base stations to produce the Geometric Time Difference (GTD). The GTD is the time difference that would have been measured by the mobile if the network was perfectly synchronised. Accordingly, the application of the RTD provides a pseudo-synchronisation.
An LMU is a receiver that is placed in a position in the network that is able to report the RTDs of a number of different base stations. If the base station clocks are not synchronised to a common source, then it is necessary to continuously update the RTDs, as the time offsets will be changing due to the clock drift in each base station.
The deployment of LMUs can be expensive, and so is a drawback of E-OTD. However, a 2003 paper describes a method of operating E-OTD without LMUs, and presents results of an operational trial. In essence, if there are sufficient independent OTD measurements such that the equation system is over-determined, then the additional information can be used to estimate the RTDs.
E-OTD was considered for the Enhanced 911
mandate, but ultimately was not a successful contender for this application. An active proponent and developer of E-OTD was Cambridge Positioning Systems (CPS). In 2007, CPS was acquired by CSR
. In 2009, CSR merged with SIRF
.
Because E-OTD requires a software modification to be included in the mobile phone, E-OTD positioning system has been less commonly used than the U-TDOA
positioning system.
Advertisement of the E-OTD capability
Manual for the E-ODT compliance check
E-OTD compliance check in lab environment
Enhanced Observed Time Difference (E-OTD) is a standard for the location of mobile telephones. The location method works by multilateration
Multilateration
Multilateration is a navigation technique based on the measurement of the difference in distance to two or more stations at known locations that broadcast signals at known times. Unlike measurements of absolute distance or angle, measuring the difference in distance results in an infinite number of...
. The standardisation was first carried out for GSM by the GSM standard committees (T1P1.5 and ETIS) in LCS Release 98 and Release 99. The standardisation was continued for 3G
3G
3G or 3rd generation mobile telecommunications is a generation of standards for mobile phones and mobile telecommunication services fulfilling the International Mobile Telecommunications-2000 specifications by the International Telecommunication Union...
and WCDMA mobile telephones by 3GPP.
Conceptually, the method is similar to U-TDOA
U-TDOA
U-TDOA, or Uplink Time Difference of Arrival, is a real time locating technology for mobile phone networks that uses multilateration based on timing of received signals to locate a mobile phone .- See also :* Real time locating* Locating Engines...
, however, it involves time difference measurements being made in the handset rather than the network, and a mechanism to pseudo-synchronise the network. The handset makes an observation of the time difference of arrival of signals from two different base stations. These observations are known as Observed Time Difference (OTD). The handset measures the OTD between a number of different base stations. If the base stations were synchronised, then a single OTD defines a hyperbolic locus. A second, independent OTD, for which one of the observed base stations is spatially distinct from those in the first OTD, would provide a second hyperbolic locus, and the intersection of the two loci gives an estimate of the location of the mobile. If more than two independent OTDs are available, then the measurements can be combined to yield a more accurate measurement.
However, GSM and 3G networks are not necessarily synchronised, so further information is needed. The E-OTD standard provides a method for pseudo-synchronisation. A Location Measurement Unit (LMU) can be used to estimate the transmission time offset between two base stations. This measurement is known as the Real Time Difference (RTD). The RTD for two base stations can then be subtracted from the OTD for the same two base stations to produce the Geometric Time Difference (GTD). The GTD is the time difference that would have been measured by the mobile if the network was perfectly synchronised. Accordingly, the application of the RTD provides a pseudo-synchronisation.
An LMU is a receiver that is placed in a position in the network that is able to report the RTDs of a number of different base stations. If the base station clocks are not synchronised to a common source, then it is necessary to continuously update the RTDs, as the time offsets will be changing due to the clock drift in each base station.
The deployment of LMUs can be expensive, and so is a drawback of E-OTD. However, a 2003 paper describes a method of operating E-OTD without LMUs, and presents results of an operational trial. In essence, if there are sufficient independent OTD measurements such that the equation system is over-determined, then the additional information can be used to estimate the RTDs.
E-OTD was considered for the Enhanced 911
Enhanced 911
Enhanced 911, E-911 or E911 in North America is one example of the modern evolution of telecommunications based system meant as an easy way to link people experiencing an emergency with the public resources that can help. The dial-three-digits concept first originated in the United Kingdom in 1937....
mandate, but ultimately was not a successful contender for this application. An active proponent and developer of E-OTD was Cambridge Positioning Systems (CPS). In 2007, CPS was acquired by CSR
CSR
CSR may refer to:In business:* CSR Limited, an Australian industrial company, formerly known as Colonial Sugar Refining Company* CSR plc, or Cambridge Silicon Radio, a British silicon chip designer and software company...
. In 2009, CSR merged with SIRF
CSR plc
CSR , or Cambridge Silicon Radio, is a company based in Cambridge, England. CSR is a fabless semiconductor company whose main product lines include connectivity, audio and location chips. It is listed on the London Stock Exchange and is a constituent of the FTSE 250 Index...
.
Because E-OTD requires a software modification to be included in the mobile phone, E-OTD positioning system has been less commonly used than the U-TDOA
U-TDOA
U-TDOA, or Uplink Time Difference of Arrival, is a real time locating technology for mobile phone networks that uses multilateration based on timing of received signals to locate a mobile phone .- See also :* Real time locating* Locating Engines...
positioning system.
External links
Encyclopedic article from Phone ScoopAdvertisement of the E-OTD capability
Manual for the E-ODT compliance check
E-OTD compliance check in lab environment
See also
- Real time locating
- Locating Engines
- MultilaterationMultilaterationMultilateration is a navigation technique based on the measurement of the difference in distance to two or more stations at known locations that broadcast signals at known times. Unlike measurements of absolute distance or angle, measuring the difference in distance results in an infinite number of...
- Unilateration
- U-TDOAU-TDOAU-TDOA, or Uplink Time Difference of Arrival, is a real time locating technology for mobile phone networks that uses multilateration based on timing of received signals to locate a mobile phone .- See also :* Real time locating* Locating Engines...