Caterpillar D10
Encyclopedia
The Caterpillar D10 is a track-type tractor
Caterpillar track
Continuous tracks or caterpillar tracks are a system of vehicle propulsion in which modular metal plates linked into a continuous band are driven by two or more wheels...

 manufactured by Caterpillar Inc.
Caterpillar Inc.
Caterpillar Inc. , also known as "CAT", designs, manufactures, markets and sells machinery and engines and sells financial products and insurance to customers via a worldwide dealer network. Caterpillar is the world's largest manufacturer of construction and mining equipment, diesel and natural gas...

 (then called the Caterpillar Tractor Company). It was the first modern tractor to use the elevated drive sprocket to improve durability, operator comfort, and ease of maintenance.

History and features

The first pilot D10 was D10X1 and was shown in July 1973 at a big Caterpillar corporate meeting.Other prototypes would follow in 1975 and 1977. In March 1977, prototypes P-1 through P-10 would appear and be subsequently dispatched to different job sites. The Caterpillar D10 was the result of a need for a tractor larger than the Caterpillar D9
Caterpillar D9
Caterpillar D9 - General Characteristics Engineering Role: Heavy bulldozer Propulsion: Caterpillar tracks Engine model:CAT C18 ACERT 3408 HEUI Gross power: 464 hp D9T 474 hp D9R...

. At this time, competitors were building bulldozers that were more powerful than the D9. Allis Chalmers introduced at Conexpo 69 in Chicago a 524 hp HD-41 which was the largest crawler in the world. In 1974 after AC and Fiat merged their construction equipment divisions the 524hp 41-B was introduced. For example, the Fiat-Allis 41-B track-type tractor had 524horsepower
Horsepower
Horsepower is the name of several units of measurement of power. The most common definitions equal between 735.5 and 750 watts.Horsepower was originally defined to compare the output of steam engines with the power of draft horses in continuous operation. The unit was widely adopted to measure the...

 (391 kW) at the time, while the D9H had 410 hp. In 1976 Japanese company Komatsu
Komatsu
orKomatsu is a multinational corporation that manufactures construction, mining, and military equipment, Industrial equipments such as press machines, lasers, and thermoelectric generators.Its headquarters is at 2-3-6, Akasaka, Minato, Tokyo, Japan...

 came out with an even larger bulldozer called the D455A at 620 hp and 167000 lb (75,749.9 kg). The D10 was so big that it could do about 50 percent more production that the then D9H.

The D10 was introduced at a dealer meeting by Caterpillar in the fall of 1977. Between 1978 and 1986 nearly 1,000 D10s were made at Caterpillar's East Peoria plant. The D10 had sales of their Fiat-Allis/Komatsu
Komatsu
orKomatsu is a multinational corporation that manufactures construction, mining, and military equipment, Industrial equipments such as press machines, lasers, and thermoelectric generators.Its headquarters is at 2-3-6, Akasaka, Minato, Tokyo, Japan...

 competitive sized bulldozers combined. With the introduction of the N-Series tractors in 1986-87 their model numbers were pushed up. For example the D9N replaced the D8L,the D10N replaced the D9L and the D11N replaced the D10.

Advantages and disadvantages of the High Drive system

Among modern tractors, the high drive (elevated sprocket) design is unique to Caterpillar products. The concept originated in 1914 with Caterpillar predecessor C. L. Best Tractor's 30 Humpback; this tractor was discontinued a year later, and the only other tractor to use the concept until the D10's introduction was the Cletrac Model F, built between 1920 and 1922. The elevated sprocket eliminates the final drive system, which tended to break frequently. This elevated drive sprocket undercarriage was built in modular form. You can break down the tracks and then pull out the drive sprockets. From the back you can pull the transmission out because of the modular design. As the engine and drivetrain are mounted high in a traditional bulldozer, the half shaft
Half shaft
The term half shaft is another name for a front-wheel drive shaft, which is also called the constant velocity axle or CV axle. There is one half shaft per wheel. Some may further to this part as a CV shaft....

s from the differential exit above the drive sprocket, requiring a small gear on the end of the half shaft and another, larger one attached to the drive sprocket. The high-drive system eliminates the traditional final drive in favor of the planetary final drive, which is more effective at withstanding engine torque, since it spreads the forces over multiple gear teeth instead of a single tooth as in the traditional system. The disadvantage is that the track moves around one more sprocket, reducing track life. Caterpillar claims to have alleviated this with the SALT(Sealed and Lubricated Track), a permanently lubricated track system which was introduced on their track-type tractors in the early 1970s.

Introduction of the D10

When the D10 was introduced in 1977, it was the most powerful track-type tractor ever built at 700 hp . The Cat D10 could be ordered with up to a 19 feet (5.8 m) U-blade, and weighed in at 180000 lb (81,646.6 kg). Later versions weighed in at 190000 lb (86,182.6 kg). The U-blade was 7 feet (2.1 m) high and could push 35 yards (32 m) according to Caterpillar's literature. The November 1977 issue of Excavating Contractor magazine had a 2 page story on the bulldozer titled "Cat Uncorks The New D10". One of the first D10s is currently sitting in front of the East Peoria, Ill plant where it was made.A picture of this D10 can found on pages of a book titled"The Caterpillar Century" on pages 298-297. Caterpillar put the 1,786 cid V-12 twin turbocharged D348 in the D10 to power it. This had already proven itself in the 777 off-highway hauler and the 550hp 10 yard 992/992B wheel loaders from 1968 on. The early D10s came with a single big black exhaust stack up front. But some engine problems came up with exhaust system routing which resulted in in 2 exhaust stacks up front to correct this problem. This new look took root in 1980. At the time Caterpillar's bulldozer lineup was the 62 hp D3, 75 hp D4E, 105 hp D5B, 140 hp D6D, 200 hp D7G, 300 hp D8K, and 410 hp D9H with the addition of the 700 hp D10.

In 1986 an even larger dozer, the 770 hp Caterpillar D11N was introduced to replace the D10. The D11 carried on the success of the elevated drive sprocket system in large bulldozers. The currently available D10T model, and preceding D10R and D10N variants, are not the original D10's successors but the D11N,D11R and the current D11T are.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK