Scimitar antenna
Encyclopedia
A scimitar antenna is a radio antenna so named because its shape resembles a talon-shaped curved sword
of the same name. It was invented in 1958 by Edwin M. and William P. Turner. It is essentially a flat metal plate in a semi-circular or semi-elliptical shape with a wide end at one side and a narrow point at the other. Its shape makes it suited for use on aircraft or space vehicles. It was used for VHF communication on the Apollo manned lunar landing program.
A U.S. patent was applied for on October 31, 1958, and granted on December 26, 1961. The inventors assigned the patent to the U.S. government, as represented by the Secretary of the Air Force.
carried a pair of elliptical VHF scimitar antennas on the Service Module walls.
The antenna's scimitar shape wasn't externally visible, since it had to be covered by a shroud for aerodynamic purposes. The antenna radiated and received signals in an approximately hemispherical pattern, therefore two antennas were necessary to provide full omnidirectional coverage.
The earlier Block I design of the Apollo spacecraft carried the scimitar antennas inside two semicircular strakes
attached near the base of the Command Module, which were intended to improve aerodynamic stability during reentry. However, the strakes were found to be unnecessary, and would have been ineffective at high lunar return reentry speeds. Therefore the strakes were deleted and the antennas were moved to the Service Module in the Block II design used in manned missions.
The first two Lunar Modules
to fly, Apollo 5
and Apollo 9
, also carried a pair of VHF scimitar antennas for the transmission of Developmental Flight Instrumentation (DFI) telemetry data. One was located on the front face, just inboard of the right-hand side cockpit window, and the other was located on the left side of the aft equipment bay. Since the Lunar Module never operated in the earth's atmosphere, no aerodynamic covering was necessary, and the scimitar shape was externally visible. After Apollo 9 the Lunar Module was considered operational, so the DFI and scimitar antennas were not present on subsequent flights.
Scimitar
A scimitar is a backsword or sabre with a curved blade, originating in Southwest Asia .The Arabic term saif translates to "sword" in general, but is normally taken to refer to the scimitar type of curved backsword in particular.The curved sword or "scimitar" was widespread throughout the Muslim...
of the same name. It was invented in 1958 by Edwin M. and William P. Turner. It is essentially a flat metal plate in a semi-circular or semi-elliptical shape with a wide end at one side and a narrow point at the other. Its shape makes it suited for use on aircraft or space vehicles. It was used for VHF communication on the Apollo manned lunar landing program.
A U.S. patent was applied for on October 31, 1958, and granted on December 26, 1961. The inventors assigned the patent to the U.S. government, as represented by the Secretary of the Air Force.
Use in Apollo Program
The Apollo Block II Command/Service ModuleApollo Command/Service Module
The Command/Service Module was one of two spacecraft, along with the Lunar Module, used for the United States Apollo program which landed astronauts on the Moon. It was built for NASA by North American Aviation...
carried a pair of elliptical VHF scimitar antennas on the Service Module walls.
The antenna's scimitar shape wasn't externally visible, since it had to be covered by a shroud for aerodynamic purposes. The antenna radiated and received signals in an approximately hemispherical pattern, therefore two antennas were necessary to provide full omnidirectional coverage.
The earlier Block I design of the Apollo spacecraft carried the scimitar antennas inside two semicircular strakes
Strake
A strake is part of the shell of the hull of a boat or ship which, in conjunction with the other strakes, keeps the sea out and the vessel afloat...
attached near the base of the Command Module, which were intended to improve aerodynamic stability during reentry. However, the strakes were found to be unnecessary, and would have been ineffective at high lunar return reentry speeds. Therefore the strakes were deleted and the antennas were moved to the Service Module in the Block II design used in manned missions.
Apollo Lunar Module
The Apollo Lunar Module was the lander portion of the Apollo spacecraft built for the US Apollo program by Grumman to carry a crew of two from lunar orbit to the surface and back...
to fly, Apollo 5
Apollo 5
Apollo 5 was the first unmanned flight of the Apollo Lunar Module, which would later carry astronauts to the lunar surface. It lifted off on January 22, 1968 with a Saturn IB rocket.-Objectives:...
and Apollo 9
Apollo 9
Apollo 9, the third manned mission in the American Apollo space program, was the first flight of the Command/Service Module with the Lunar Module...
, also carried a pair of VHF scimitar antennas for the transmission of Developmental Flight Instrumentation (DFI) telemetry data. One was located on the front face, just inboard of the right-hand side cockpit window, and the other was located on the left side of the aft equipment bay. Since the Lunar Module never operated in the earth's atmosphere, no aerodynamic covering was necessary, and the scimitar shape was externally visible. After Apollo 9 the Lunar Module was considered operational, so the DFI and scimitar antennas were not present on subsequent flights.