SMPTE 372M
Encyclopedia
SMPTE 372M is a standard
Standardization
Standardization is the process of developing and implementing technical standards.The goals of standardization can be to help with independence of single suppliers , compatibility, interoperability, safety, repeatability, or quality....

 published by SMPTE which expands upon SMPTE 259M
SMPTE 259M
SMPTE 259M is a standard published by SMPTE which "... describes a 10-bit serial digital interface operating at 143/270/360 Mb/s." The goal of SMPTE 259M is to define a Serial Digital Interface , called SDI or SD-SDI....

, SMPTE 344M
SMPTE 344M
"SMPTE 344M" is a standard published by SMPTE which expands upon SMPTE 259M allowing for bit-rates of 540 Mbit/s, allowing EDTV resolutions of 480p and 576p.This standard is part of a family of standards that define a Serial Digital Interface....

, and SMPTE 292M
SMPTE 292M
SMPTE 292M is a standard published by SMPTE which expands upon SMPTE 259M and SMPTE 344M allowing for bit-rates of 1.485 Gbit/s, and 1.485/1.001 Gbit/s...

 allowing for bit-rates of 2.970 Gbit/s, and 2.970/1.001 Gbit/s over two wires. These bit-rates are sufficient for 1080p
1080p
1080p is the shorthand identification for a set of HDTV high-definition video modes that are characterized by 1080 horizontal lines of resolution and progressive scan, meaning the image is not interlaced as is the case with the 1080i display standard....

 video.

This standard is essentially known as dual-link HD-SDI and is part of a family of standards that define a Serial Digital Interface
Serial Digital Interface
Serial digital interface is a family of video interfaces standardized by SMPTE. For example, ITU-R BT.656 and SMPTE 259M define digital video interfaces used for broadcast-grade video...

.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK