Ross rifle
Encyclopedia
The Ross rifle was a straight-pull bolt-action 0.303 inch calibre
.303 British
.303 British, or 7.7x56mmR, is a .311 inch calibre rifle and machine gun cartridge first developed in Britain as a blackpowder round put into service in December 1888 for the Lee-Metford rifle, later adapted to use smokeless powders...

 rifle
Rifle
A rifle is a firearm designed to be fired from the shoulder, with a barrel that has a helical groove or pattern of grooves cut into the barrel walls. The raised areas of the rifling are called "lands," which make contact with the projectile , imparting spin around an axis corresponding to the...

 produced in Canada
Canada
Canada is a North American country consisting of ten provinces and three territories. Located in the northern part of the continent, it extends from the Atlantic Ocean in the east to the Pacific Ocean in the west, and northward into the Arctic Ocean...

 from 1903 until the middle of the First World War
World War I
World War I , which was predominantly called the World War or the Great War from its occurrence until 1939, and the First World War or World War I thereafter, was a major war centred in Europe that began on 28 July 1914 and lasted until 11 November 1918...

.

Although the Ross .303 was a superior marksman
Marksman
A marksman is a person who is skilled in precision, or a sharpshooter shooting, using projectile weapons, such as with a rifle but most commonly with a sniper rifle, to shoot at long range targets...

's rifle, it had many faults in the adverse environment imposed by trench warfare
Trench warfare
Trench warfare is a form of occupied fighting lines, consisting largely of trenches, in which troops are largely immune to the enemy's small arms fire and are substantially sheltered from artillery...

, and after numerous complaints the replacement of all Ross rifles in the three Canadian Divisions by the Lee-Enfield
Lee-Enfield
The Lee-Enfield bolt-action, magazine-fed, repeating rifle was the main firearm used by the military forces of the British Empire and Commonwealth during the first half of the 20th century...

 was ordered.

Snipers, however retained a considerable fondness for the weapon.

A sporting version using the new .280 Ross
.280 Ross
The .280 Ross, also known as the .280 Nitro, .280 Rimless Nitro Express Ross and .280 Rimless cartridge, is an approximately 7mm bullet diameter rifle round developed in Canada by F.W...

 cartridge was produced for some time, and both the Ross rifle and the .280 calibre "magnum" round acquired a very considerable international reputation among target shooters, deer-stalkers
Deer stalking
Deer stalking is a British term for the stealthy pursuit of deer for sporting purposes, historically with dogs such as Scottish Deerhounds, or in modern times typically with a high powered rifle fitted with a telescopic sight to hunt them....

 and safari hunters.

History

During the Second Boer War
Second Boer War
The Second Boer War was fought from 11 October 1899 until 31 May 1902 between the British Empire and the Afrikaans-speaking Dutch settlers of two independent Boer republics, the South African Republic and the Orange Free State...

, a minor diplomatic fight broke out between Canada and the United Kingdom
United Kingdom
The United Kingdom of Great Britain and Northern IrelandIn the United Kingdom and Dependencies, other languages have been officially recognised as legitimate autochthonous languages under the European Charter for Regional or Minority Languages...

, after the latter refused to sell or license the Lee Enfield SMLE design for production in Canada. Sir Charles Ross
Sir Charles Ross, 9th Baronet
Sir Charles Henry Augustus Frederick Lockhart Ross, 9th Baronet was a Scottish inventor and commercial entrepreneur who invented the innovative and often controversial straight-pull actioned Ross rifle....

, Bart.
Baronet
A baronet or the rare female equivalent, a baronetess , is the holder of a hereditary baronetcy awarded by the British Crown...

, a Scottish
Scotland
Scotland is a country that is part of the United Kingdom. Occupying the northern third of the island of Great Britain, it shares a border with England to the south and is bounded by the North Sea to the east, the Atlantic Ocean to the north and west, and the North Channel and Irish Sea to the...

 nobleman, soldier, inventor and entrepreneurial businessman, offered his newly designed straight-pull rifle as a replacement. Ross was well connected in Canadian society and eventually landed his first contract in 1903 for 12,000 Mark I Ross rifles.

In this design, the bolt locking lugs are mounted on a screw, and when the operating handle is pulled or pushed, the screw automatically turns to rotate the locking lugs into place in the action receiver. The design is generally similar to that used on most artillery
Artillery
Originally applied to any group of infantry primarily armed with projectile weapons, artillery has over time become limited in meaning to refer only to those engines of war that operate by projection of munitions far beyond the range of effect of personal weapons...

 pieces. Unlike the more common bolt actions found in the Mauser
Mauser
Mauser was a German arms manufacturer of a line of bolt-action rifles and pistols from the 1870s to 1995. Mauser designs were built for the German armed forces...

 and Lee Enfield, the Ross action did not need to have the handle rotated a quarter turn before the bolt was pulled back, and this feature theoretically offered a higher rate of fire. In addition to this alleged advantage over the Lee Enfield, the Ross was also a pound lighter and could be disassembled more quickly without special tools.

Service

The first 1,000 rifles were given to the Royal Northwest Mounted Police (RNWMP) for testing. Routine inspection before operational testing found 113 defects bad enough to warrant rejection. One of these was a poorly designed bolt lock that enabled the bolt to fall right out of the rifle. Another was poorly tempered component springs that were described as being as "soft as copper". In 1906, the RNWMP reverted to their Model 1894
Winchester Model 1894
Winchester Model 1894 is a lever-action rifle which became one of the most famous and popular hunting rifles...

 Winchesters
Winchester Repeating Arms Company
The Winchester Repeating Arms Company was a prominent American maker of repeating firearms, located in New Haven, Connecticut. The Winchester brand is today used under license by two subsidiaries of the Herstal Group, Fabrique Nationale of Belgium and the Browning Arms Company of Morgan, Utah.-...

 and Lee-Metford
Lee-Metford
The Lee-Metford rifle was a bolt action British army service rifle, combining James Paris Lee's rear-locking bolt system and ten-round magazine with a seven groove rifled barrel designed by William Ellis Metford...

s.

The Ross rifle was modified to correct these faults and became the Mark II Ross (Model 05 (1905)). In 1907, the Mk II was modified to handle the higher pressure of newly designed .280 Ross, this variant was called Mk II**. The Model 10 (1910) was a completely new design, made to correct the shortcomings of the 1905. None of the major parts are interchangeable between the 1905 and the 1910 models. The Model 10 was the standard infantry weapon of the First Canadian Contingent of the Canadian Expeditionary Force
Canadian Expeditionary Force
The Canadian Expeditionary Force was the designation of the field force created by Canada for service overseas in the First World War. Units of the C.E.F. were divided into field formation in France, where they were organized first into separate divisions and later joined together into a single...

 when it first arrived in France
France
The French Republic , The French Republic , The French Republic , (commonly known as France , is a unitary semi-presidential republic in Western Europe with several overseas territories and islands located on other continents and in the Indian, Pacific, and Atlantic oceans. Metropolitan France...

 in February 1915.

The shortcomings of the rifle were made apparent during the Second Battle of Ypres
Second Battle of Ypres
The Second Battle of Ypres was the first time Germany used poison gas on a large scale on the Western Front in the First World War and the first time a former colonial force pushed back a major European power on European soil, which occurred in the battle of St...

 in April 1915. The rifle showed poor tolerance of dirt when used in field conditions, particularly the screw threads operating the bolt lugs, jamming the weapon open or closed. Another part of the jamming problem came from the bolt's outer face hitting the bolt stop, then deforming the thread shape. The bolt could also be disassembled for routine cleaning and inadvertently reassembled in a manner that would fail to lock but still allow a round to be fired, leading to serious injury or death of the operator as the bolt flew back into his face. "Thankfully such incidents were minor." Another well-known deficiency was the tendency for the bayonet
Bayonet
A bayonet is a knife, dagger, sword, or spike-shaped weapon designed to fit in, on, over or underneath the muzzle of a rifle, musket or similar weapon, effectively turning the gun into a spear...

 to fall off the rifle when the weapon was fired. Many Canadians of the First Contingent (now renamed the 1st Canadian Division
1st Canadian Division
Formed in August 1914, the 1st Canadian Division was a formation of the Canadian Expeditionary Force. The division was initially made up from provisional battalions that were named after their province of origin but these titles were dropped before the division arrived in Britain on October 14,...

) at Ypres retrieved Lee Enfields from British casualties to replace their Ross rifles. Lieutenant Chris Scriven of the 10th Battalion, CEF
10th Battalion, CEF
The 10th Battalion, Canadian Expeditionary Force was a Canadian field force unit created during the First World War. Technically distinct from the Militia from which its soldiers were drawn the unit served in the Canadian Expeditionary Force , specifically in the 1st Canadian Division from 1914 to...

, commented that it sometimes took five men just to keep one rifle firing.

Complaints rapidly reached the rifle's chief sponsor, the Canadian Minister of Militia and Defence Sam Hughes
Sam Hughes
For other people of the same name see Sam Hughes Sir Samuel Hughes, KCB, PC was the Canadian Minister of Militia and Defence during World War I...

. He nevertheless continued to believe in its strengths, following professional advice from Sir Edwin Alderson
Edwin Alderson
Lieutenant General Sir Edwin Alfred Hervey Alderson KCB was a senior British Army officer who served in several campaigns of the late nineteenth and early twentieth centuries...

. In particular, the Ross was more accurate at long range than the SMLE, and this potentially overcame the serious problem British and Canadian troops had faced during the Boer War, with the accurate long-range fire from the 7 mm Mauser
7 x 57 mm Mauser
The 7×57mm cartridge, also known as the 7 mm Mauser, 7×57mm Mauser, 7 mm Spanish Mauser in the USA and .275 Rigby in the United Kingdom, was developed by Paul Mauser of the Mauser company in 1892 and adopted as a military cartridge by Spain in 1893. It was subsequently adopted by several...

.

In all, approximately 420,000 Ross service rifles were produced, 342,040 of which were purchased by the British.

Replacement

Canadians retained the Ross even as additional contingents arrived in France. By the time of the Somme battles of July 1916, Sir Douglas Haig
Douglas Haig
Douglas Haig, 1st Earl Haig was a British soldier and senior commander during World War I.Douglas Haig may also refer to:* Club Atlético Douglas Haig, a football club from Argentina* Douglas Haig , American actor...

, the new Commander-in-Chief of the British Expeditionary Force, had ordered the replacement of all Ross rifles in the three Canadian Divisions by the Lee-Enfield, which was finally available in quantity. Hughes refused to accept that there were problems with the Ross, and it took the intervention of many influential people to persuade him otherwise. In November 1916, Hughes resigned after Sir Robert Borden
Robert Borden
Sir Robert Laird Borden, PC, GCMG, KC was a Canadian lawyer and politician. He served as the eighth Prime Minister of Canada from October 10, 1911 to July 10, 1920, and was the third Nova Scotian to hold this office...

's decision to appoint a Minister of Overseas Forces. Ross rifles were then used in training roles, both in Canada and the UK, to free up more Lee-Enfields for the front. More were also shipped to the U.S. in 1917 for the same reasons, freeing up supplies of the M1903 Springfield rifle. Hughes' reputation was inevitably tarnished, but Sir Charles Ross had already made a considerable fortune from his rifle design and manufacturing contracts.

At around same time, the Dominion Rifle Factory (Quebec City
Quebec City
Quebec , also Québec, Quebec City or Québec City is the capital of the Canadian province of Quebec and is located within the Capitale-Nationale region. It is the second most populous city in Quebec after Montreal, which is about to the southwest...

) converted a number of Rosses into the Huot automatic rifle
Huot automatic rifle
The Huot was a Canadian World War I light machine gun project.-Design and development:In 1916, the Canadian Expeditionary Force was desperately short of light machine guns. Since the Ross rifle had finally been taken out of service, there were large numbers of surplus rifles.That year, Joseph Huot,...

, under the guidance of a designer named Huot. It was an effective design, feeding from a drum magazine
Drum magazine
A drum magazine is a type of firearms magazine that is cylindrical in shape, similar to a drum. Instead of rounds being stored flat, as in a more common box magazine, rounds in a drum magazine are stored in a spiral around the center of the magazine, facing the direction of the barrel.There are...

, and cheaper than a Lewis Gun
Lewis Gun
The Lewis Gun is a World War I–era light machine gun of American design that was perfected and widely used by the British Empire. It was first used in combat in World War I, and continued in service with a number of armed forces through to the end of the Korean War...

. Unfortunately, despite the Canadian Corps' facing a severe shortage of light machine guns, protracted trials led to its being rejected for reasons of flimsiness of construction.

Sniper rifles

Because of its long range accuracy, the Ross rifle continued in use among Allied snipers after it was withdrawn from normal front-line use in Europe. British snipers found the rifle accurate out to 600 yards and more, with only one inherent disadvantage: the Ross accepted only perfectly clean ammunition, totally free of mud and grit, or else it invariably jammed.

Two types of Mark III sniper rifles are identified by different telescopic sights. Five-hundred rifles were fitted with 5.2X Warner & Swasey Company
Warner & Swasey Company
The Warner & Swasey Company was an American manufacturer of machine tools, instruments, and special machinery. It operated as an independent business firm, based in Cleveland, from its founding in 1880 until its acquisition in 1980...

 Model 1913 prismatic telescopic sights manufactured in Cleveland, Ohio
Cleveland, Ohio
Cleveland is a city in the U.S. state of Ohio and is the county seat of Cuyahoga County, the most populous county in the state. The city is located in northeastern Ohio on the southern shore of Lake Erie, approximately west of the Pennsylvania border...

. Serial numbers for rifles manufactured in 1915 have a FK prefix; while those manufactured in 1917 have a LU prefix. Another 907 rifles were fitted with Winchester Repeating Arms Company
Winchester Repeating Arms Company
The Winchester Repeating Arms Company was a prominent American maker of repeating firearms, located in New Haven, Connecticut. The Winchester brand is today used under license by two subsidiaries of the Herstal Group, Fabrique Nationale of Belgium and the Browning Arms Company of Morgan, Utah.-...

 A5 telescopic sights. Both telescopic sights were mounted offset so the iron sights were usable and the rifle could still be loaded from charging strips.

Sporting variant

Ross settled a gun factory in Hartford, Connecticut
Connecticut
Connecticut is a state in the New England region of the northeastern United States. It is bordered by Rhode Island to the east, Massachusetts to the north, and the state of New York to the west and the south .Connecticut is named for the Connecticut River, the major U.S. river that approximately...

, with machinist J. A. Bennett, to produce a sporting rifle called Model 1897 Magazine Sporting Rifle a hinged hammer type rifle. By the same time, he made commercial agreement with famous gunmaker firm Charles Lancaster, inventor of the oval bore, to be his exclusive UK agent.
  • Caliber; .303 Brit.


Early 1900, he brought out the Model 1900 Sporter, still made in Bennett's factory. This action used a coil spring
Coil spring
A Coil spring, also known as a helical spring, is a mechanical device, which is typically used to store energy and subsequently release it, to absorb shock, or to maintain a force between contacting surfaces...

 to activate the firing pin, instead of the hinged-hammer of the M1897. Very few of these sporting rifles are known to exist. The militarized Pattern 1900 was also the first to be offered for trial to Canada.
  • Caliber; .303 Brit.


Following was Model 1903 Sporter some of these rifles were made in Hartford, Connecticut, but most (200 units, made from spare parts) were assembled at the brand new fabricating plant in Quebec City. Some of the Pattern 1903 Sporting Rifles were made in the .370 Express calibre, while some prototype chambered for .450/.500 Nitro is known to exist.
  • Calibers; .303 Brit. (common), .256 Mannlicher (rare) and .370 Express (rare)


Some sporterised M1905 (Mk II) military rifles were made available to general public in 1906. This model was called Model M. In 1907, Ross brought out the Model E, his first entirely Canadian-made rifle, based on the 1905 military action, chambered for .303 British
.303 British
.303 British, or 7.7x56mmR, is a .311 inch calibre rifle and machine gun cartridge first developed in Britain as a blackpowder round put into service in December 1888 for the Lee-Metford rifle, later adapted to use smokeless powders...

 and .35 WCF. Following was Model R, which was a plain looking rifle, no checkering, in caliber .303 British only. In November 1906, Ross while in the process of developing a new and very powerful .280 caliber sporting cartridge, made some experimental testings with a necked-down version of the new 30-06 Springfield case which he called the .28-1906 (one rifle is known to exist). This led to the design of the .280 Ross
.280 Ross
The .280 Ross, also known as the .280 Nitro, .280 Rimless Nitro Express Ross and .280 Rimless cartridge, is an approximately 7mm bullet diameter rifle round developed in Canada by F.W...

. The new high-pressure round required some strengthening of the bolt and action receiver, but the rifle was otherwise only slightly different from the .303 Mark II. This design, called MK II**, was a transitional step between Mk II and Mk III actions.
  • Calibers;

Model M (1905 Mk II action); .303 Brit

Model R (1905 Mk II action); .303 Brit.

Model E (1907 Mk II** action heavy barrel); .303 Brit., 35 WCF

Model 1907 'Scotch Deer Stalking Pattern'; .280 Ross

Model 1910 (Mk III) was made with a totally different bolt head; instead of having the solid bolt lugs travel in a vertical position and lock in a horizontal position, like for the Mk II and Mk II** (see illustration), Ross turned it 90 degrees so it travels in an horizontal position and locks vertically. Then, he used screw threads on the lugs outside which are locking into the matching threaded receiver. Some very scarce Mk II** with the same threaded lugs and receiver are known to exist. He also used the same shape of heavy barrel as used on the Mk II**. The M-10, in .280 Ross, is considered by many as being the finest rifle ever made by the Ross Rifle Co.
  • Calibers


Model R-10; .303 Brit.

Model E-10; .303 Brit and .35 WCF

Model M-10; .280 Ross

1912 saw the introduction of the .22 rimfire sporting rifle. While using a simpler mechanism, it was still a straight-pull action. This model was very popular in Canada.
  • Calibers; .22 Short, Long and Long Rifle.


Model 1912 Cadet Commercial.

Model 1912 Cadet "Leftover" (no serial numbers or any other markings)

The problems with the Ross in combat were that it was really a sporting design of rifle asked to do the work of a military rifle under trench warfare conditions. However, as a sporting rifle, the Ross became quite popular after the war. The new .280 Ross cartridge gained it a fine reputation for medium-sized game, and for a time after 1918 it was a fairly common rifle on safari
Safari
A safari is an overland journey, usually a trip by tourists to Africa. Traditionally, the term is used for a big-game hunt, but today the term often refers to a trip taken not for the purposes of hunting, but to observe and photograph animals and other wildlife.-Etymology:Entering the English...

. It also proved itself as being an outstanding Match Rifle, building a strong reputation for accuracy.

Match Rifles

Ross Mark II** Commercial Target Model in caliber ,303 British, with a 30 inches (775 mm) heavy barrel, was a real success in the Match Ranges from 1908 to 1913. This rifle was looking like the military Mk II**, using the same bolt, except having the sight bridge mounted on the receiver. A scarce Presentation Target Rifle was also available. Unlike its military counterpart, it had the serial number stamped on the barrel.

Model 1907 and 1905/1910 Match Target Rifle These very important single-shot rifles (two rifles are known to exist) are bearing special feature that would make the M1910 so different; the threaded locking lugs and receiver.

Military Match Target Rifle unlike the military Mk III this rifle was using a box type magazine with flat floorplate. It was using the Ross Mk III military sight modified to fit the .280 Ross ammunitions. Barrel was 26 inches long.

Developments

After the rejection of the Ross as a battlefield rifle, the Dominion Rifle Factory adapted the action to a light machinegun, the Huot, using surplus rifles. These were cheaper than the Lewis gun
Lewis Gun
The Lewis Gun is a World War I–era light machine gun of American design that was perfected and widely used by the British Empire. It was first used in combat in World War I, and continued in service with a number of armed forces through to the end of the Korean War...

s then in use. They were put to extensive trials; the war ended before they entered service.

Other users

Ross rifles were used once again in the Second World War. The Mark 3 Ross rifle was supplied to the Royal Canadian Navy, the Veteran's Guard of Canada, coastal defense units, training depots, the British Home Guard, London Fire Brigade
London Fire Brigade
The London Fire Brigade is the statutory fire and rescue service for London.Founded in 1865, it is the largest of the fire services in the United Kingdom and the fourth-largest in the world with nearly 7,000 staff, including 5,800 operational firefighters based in 112 fire...

, Port of London Authority Police and the Soviets. Coast guard units in Ireland were armed with Ross rifles during 1920 to 1921.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK