Mercedes-Benz M130 engine
Encyclopedia
The Mercedes Benz M130 Engine was the last and largest of the ‘mid-sized’ Single Over Head Camshaft (SOHC) straight-6
cylinder (inline) engines produced by Mercedes Benz. The ‘mid-sized six’ started life as the 2.2 litre M180 (2,197cc/133ci) which was unveiled at the Frankfurt Motor show in September 1951 alongside the new 3.0 litre M186 ‘big’ straight-6. These engines were used to power the 220 and 300 models of the 1951 Mercedes range. While sharing many design features such as staggered valve arrangement and rockers running off a single overhead camshaft driven by a duplex cam-chain, the engines were of completely different design with little or no inter-changeability of parts.1
, 300S/Sc, 300SL
, 300SE Fintail
/Coupe/Cabrio (W111
/112), 300SE/SEL (W108
/109).2
220a from 1954 to 1956 and the W105
219 from 1956 to 1959.
The W180 Ponton
220S Sedan, Coupe and Cabriolet of 1956-1959 benefitted from the up-rated M180.924 which delivered 124 hp. In 1958 Bosch mechanical fuel injection was added to the 2.2 litre six and the engine, now giving 113-134 hp, was redesignated M127. The M127 was fitted to the last of the Pontons: the rare 1958 W128 220SE, of which fewer than 4000 were produced.
In 1959 the first series of W111
‘Fintail’ 220SE and 220SEb models was introduced, with the carburetted M180 in the 220b and 220Sb and the M127 used in the 220SEb. The addition of the lower case ‘b’ was added to differentiate the Fintails from the earlier Pontons.
From 1965 the W111/W112 sedans superseded by the new W108/109 chassis (apart from the W111 230/230S, produced from 1965 to 1968 to use up the old fintail bodyshells). All models in 1965 were given up-rated engines, the M180's bore being increased 2 mm to give 2306 cc for the 230 and 230S. The new Mercedes-Benz W108
250S and 250SE gained new 2.5 litre (2,496cc) variants of the mid-size six - the carburetted M108 and fuel-injected M129 - as did the W111 250SE two-door models. The extra capacity was obtained by lengthening the stroke by 6 mm to 78.8 mm. The M129 was fitted with a mechanically controlled six-piston fuel injection pump. A change from four to seven main bearings was necessary in order smoothly to handle the resulting increase in power. A larger capacity oil pump was also specified. Con-rods were slightly shortened, reflecting the 6mm longer stroke in a block of unchanged overall height. The redesigned cylinder heads incorporated larger ports, and the cylinder valve diameters were increased by 2mm. On the fuel injected cars a six-plunger pump replaced the previous car's two plunger pump and the injectors were repositioned to give a more direct angle towards the inlet valve heads. The engine cooling fan now had six blades instead of four and incorporated a viscous coupling which activated the fan only when engine speed exceeded 3,000 rpm or the radiator water temperature reached a preset limit.
In 1968 the ‘New Generation’ or /8 models were introduced, along with a change to the venerable mid-size six. The M180 engine of the 230/230S was continued in the W114 230 and 230.6, while the M108 of the 250S underwent a few changes and was renamed the M114. This was also available with Bosch D-Jet fuel injection, as fitted to the 250CE. The M129 of the 250SE were superseded by the M130 engine of the 280S and 280SE. At this time the 'Big' six was discontinued and the 1968-1971 300SE/300SEL used the identical M130 engine used in the 280SE.
The final incarnation of the M180 line of engines was the 2.5L M123 which was seen in the W123 chassis 250, fitted with the notorious Solex four barrel.
The M130 was the ultimate variant of the mid-sized six with a capacity of 2,778 cc, obtained by increasing the 2.5-litre versions' bore by 4 mm to 86.5 mm, the stroke remaining at 78.8 mm. This was the maximum practical enlargement of the engine given the limitations of the block as evidenced by the deletion of water passages between the cylinders.
Straight-6
The straight-six engine or inline-six engine is a six-cylinder internal combustion engine with all six cylinders mounted in a straight line along the crankcase...
cylinder (inline) engines produced by Mercedes Benz. The ‘mid-sized six’ started life as the 2.2 litre M180 (2,197cc/133ci) which was unveiled at the Frankfurt Motor show in September 1951 alongside the new 3.0 litre M186 ‘big’ straight-6. These engines were used to power the 220 and 300 models of the 1951 Mercedes range. While sharing many design features such as staggered valve arrangement and rockers running off a single overhead camshaft driven by a duplex cam-chain, the engines were of completely different design with little or no inter-changeability of parts.1
The 'Big Six'
The 3.0 litre ‘big six’ was produced from 1951 until 1967 with no change in its 2,996 cc displacement derived from a slightly under-square 85 mm x 88mm bore and stroke. The various versions of the engine (M186 – M198) produced from 113 – 212 bhp as compression ratios rose and the number of carburettors multiplied or were replaced with fuel-injection. These engines powered the 300 AdenauerMercedes-Benz Type 300
The Mercedes-Benz Type 300 were the company's largest and most-prestigious models throughout the 1950s...
, 300S/Sc, 300SL
Mercedes-Benz 300SL
The Mercedes-Benz 300SL was introduced in 1954 as a two-seat, closed sports car with distinctive gull-wing doors. Later it was offered as an open roadster...
, 300SE Fintail
Mercedes-Benz W111
The Mercedes-Benz W111 was a chassis code given to its top-range vehicles, including 4-door sedans, produced from 1959 to 1968, and 2-door coupes and cabriolets from 1961 to 1971. The W111, was initially attributed only to 6-cylinder cars with 2.2 litre engines. The luxury version with big-block 3...
/Coupe/Cabrio (W111
Mercedes-Benz W111
The Mercedes-Benz W111 was a chassis code given to its top-range vehicles, including 4-door sedans, produced from 1959 to 1968, and 2-door coupes and cabriolets from 1961 to 1971. The W111, was initially attributed only to 6-cylinder cars with 2.2 litre engines. The luxury version with big-block 3...
/112), 300SE/SEL (W108
Mercedes-Benz W108
The Mercedes-Benz W108 and W109 were luxury cars built by Mercedes-Benz from 1965 through 1972. The line was an update of the predecessor W111 and W112 fintail sedans. The cars were successful in West Germany and in export markets that included including North America and Southeast Asia...
/109).2
M180 to M130
The first M180 engine (180.920) displaced 2,195 cc (133ci) and was rated at 80 hp. It powered the W187 220 Sedan, Coupe and Cabriolet (Type A and B) from 1951 to 1955, the W180Mercedes-Benz W180
The Mercedes-Benz W180 is a 6-cylinder sedan, coupé, and convertible made from 1954 to 1959. The models associated with the W180 chassis code were the 220a and 220S...
220a from 1954 to 1956 and the W105
Mercedes-Benz W105
The Mercedes-Benz W105 is a part of The "Ponton" family. It was produced from 1956 to 1959 with a conventional, watercooled four stroke, reciprocating piston type with 6 cylinders engine.-History:...
219 from 1956 to 1959.
The W180 Ponton
Ponton (automobile)
Ponton or Pontoon styling refers to a 1930s-1960s design genre — ultimately the precursor of modern automotive styling. The trend emerged as distinct running boards and fully articulated fenders became less common and bodywork began to enclose the full width and uninterrupted length of a car...
220S Sedan, Coupe and Cabriolet of 1956-1959 benefitted from the up-rated M180.924 which delivered 124 hp. In 1958 Bosch mechanical fuel injection was added to the 2.2 litre six and the engine, now giving 113-134 hp, was redesignated M127. The M127 was fitted to the last of the Pontons: the rare 1958 W128 220SE, of which fewer than 4000 were produced.
In 1959 the first series of W111
Mercedes-Benz W111
The Mercedes-Benz W111 was a chassis code given to its top-range vehicles, including 4-door sedans, produced from 1959 to 1968, and 2-door coupes and cabriolets from 1961 to 1971. The W111, was initially attributed only to 6-cylinder cars with 2.2 litre engines. The luxury version with big-block 3...
‘Fintail’ 220SE and 220SEb models was introduced, with the carburetted M180 in the 220b and 220Sb and the M127 used in the 220SEb. The addition of the lower case ‘b’ was added to differentiate the Fintails from the earlier Pontons.
From 1965 the W111/W112 sedans superseded by the new W108/109 chassis (apart from the W111 230/230S, produced from 1965 to 1968 to use up the old fintail bodyshells). All models in 1965 were given up-rated engines, the M180's bore being increased 2 mm to give 2306 cc for the 230 and 230S. The new Mercedes-Benz W108
Mercedes-Benz W108
The Mercedes-Benz W108 and W109 were luxury cars built by Mercedes-Benz from 1965 through 1972. The line was an update of the predecessor W111 and W112 fintail sedans. The cars were successful in West Germany and in export markets that included including North America and Southeast Asia...
250S and 250SE gained new 2.5 litre (2,496cc) variants of the mid-size six - the carburetted M108 and fuel-injected M129 - as did the W111 250SE two-door models. The extra capacity was obtained by lengthening the stroke by 6 mm to 78.8 mm. The M129 was fitted with a mechanically controlled six-piston fuel injection pump. A change from four to seven main bearings was necessary in order smoothly to handle the resulting increase in power. A larger capacity oil pump was also specified. Con-rods were slightly shortened, reflecting the 6mm longer stroke in a block of unchanged overall height. The redesigned cylinder heads incorporated larger ports, and the cylinder valve diameters were increased by 2mm. On the fuel injected cars a six-plunger pump replaced the previous car's two plunger pump and the injectors were repositioned to give a more direct angle towards the inlet valve heads. The engine cooling fan now had six blades instead of four and incorporated a viscous coupling which activated the fan only when engine speed exceeded 3,000 rpm or the radiator water temperature reached a preset limit.
In 1968 the ‘New Generation’ or /8 models were introduced, along with a change to the venerable mid-size six. The M180 engine of the 230/230S was continued in the W114 230 and 230.6, while the M108 of the 250S underwent a few changes and was renamed the M114. This was also available with Bosch D-Jet fuel injection, as fitted to the 250CE. The M129 of the 250SE were superseded by the M130 engine of the 280S and 280SE. At this time the 'Big' six was discontinued and the 1968-1971 300SE/300SEL used the identical M130 engine used in the 280SE.
The final incarnation of the M180 line of engines was the 2.5L M123 which was seen in the W123 chassis 250, fitted with the notorious Solex four barrel.
The M130 was the ultimate variant of the mid-sized six with a capacity of 2,778 cc, obtained by increasing the 2.5-litre versions' bore by 4 mm to 86.5 mm, the stroke remaining at 78.8 mm. This was the maximum practical enlargement of the engine given the limitations of the block as evidenced by the deletion of water passages between the cylinders.