A kinematic pair is a connection between two bodies that imposes constraints on their relative movement. Franz Reuleaux

Franz Reuleaux

Franz Reuleaux , was a mechanical engineer and a lecturer of the Berlin Royal Technical Academy, later appointed as the President of the Academy. He was often called the father of kinematics...

 introduced the kinematic pair as a new approach to the study of machines that provided an advance over the notion of elements consisting of simple machine

Simple machine

A simple machine is a mechanical device that changes the direction or magnitude of a force.In general, they can be defined as the simplest mechanisms that use mechanical advantage to multiply force. A simple machine uses a single applied force to do work against a single load force...

s.

Hartenberg & Denavit presents the definition of a kinematic pair:

In the matter of connections between rigid bodies, Reuleaux recognized two kinds; he called them higher and lower pairs (of elements). With higher pairs, the two elements are in contact at a point or along a line, as in a ball bearing or disk cam and follower; the relative motions of coincident points are dissimilar. Lower pairs are those for which area contact may be visualized, as in pin connections, crossheads, ball-and socket joints and some others; the relative motion of coincident points of the elements, and hence of their links, are similar, and an exchange of elements from one link to the other does not alter the relative motion of the parts as it would with higher pairs.

Lower pair: A lower pair is an ideal joint that constrains contact between a point, line or plane in the moving body to a corresponding point line or plane in the fixed body. We have the following cases:

• A revolute pair, or hinged joint, requires a line in the moving body to remain co-linear with a line in the fixed body, and a plane perpendicular to this line in the moving body maintain contact with a similar perpendicular plane in the fixed body. This imposes five constraints on the relative movement of the links, which therefore has one degree of freedom.
• A prismatic joint, or slider, requires that a line in the moving body remain co-linear with a line in the fixed body, and a plane parallel to this line in the moving body maintain contact with a similar parallel plan in the fixed body. This imposes five constraints on the relative movement of the links, which therefore has one degree of freedom.

٭ A screw pair requires cut threads in two links,so that there is a turning as well as sliding motion between them.This joint has one degree of freedom.

• A cylindrical joint requires that a line in the moving body remain co-linear with a line in the fixed body. It is a combination of a revolute joint and a sliding joint. This joint has two degrees of freedom.
• A spherical joint, or ball joint, requires that a point in the moving body maintain contact with a point in the fixed body. This joint has three degrees of freedom.
• A planar joint requires that a plane in the moving body maintain contact with a plane in fixed body. This joint has three degrees of freedom.

Higher pairs: Generally, a higher pair is a constraint that requires a curve or surface in the moving body to maintain contact with a curve or surface in the fixed body. For example, the contact between a cam and its follower is a higher pair called a cam joint. Similarly, the contact between the involute curves that form the meshing teeth of two gears are cam joints.

Wrapping pair: A wrapping pair is a constraint that comprises belts, chains, and such other devices. A belt-driven pulley is an example of this pair.