|
|
|
|
International Harvester Scout
|
| |
|
| |
The International Harvester Scout was one of the first production American civilian off-road sport utility vehicles. It was originally created as a competitor to the Jeep, and like that vehicle, early models featured fold-down windshields. The first generation Scout and second generation Scout II were produced as two-door vehicles with options of a half cab pickup truck or a removable full hard or soft top. Scouts were manufactured from 1961 to 1980 in Fort Wayne, Indiana.
e were several production models of the Scout:
ne produced by International Harvester:
built by American Motors Corporation
built by Nissan
International offered the Scout with a variety of engines over its years of production.
Discussion
Ask a question about 'International Harvester Scout' Start a new discussion about 'International Harvester Scout' Answer questions from other users |
Recent Posts
Encyclopedia
The International Harvester Scout was one of the first production American civilian off-road sport utility vehicles. It was originally created as a competitor to the Jeep, and like that vehicle, early models featured fold-down windshields. The first generation Scout and second generation Scout II were produced as two-door vehicles with options of a half cab pickup truck or a removable full hard or soft top. Scouts were manufactured from 1961 to 1980 in Fort Wayne, Indiana.
Scout models and variants
There were several production models of the Scout:
- Scout 80/800 (19611971): The original production model
- Scout 810 (1971): Some early Scout II's contain Scout 810 badging on the glove box.
- Scout II (19711980): The later standard production model with a removable soft or hardtop (100 in wheelbase).
- Scout II Terra (19761980): The light pickup truck version (118 in wheelbase).
- Scout II Traveler (19761980): This version had a removable fiberglass hardtop, optional third row of seats (118 in wheelbase).
- Soft-top Safari II (SSII) (19771979): This model had removable fabric doors, a rollbar, and softtop. The Soft-top Safari model was tagged the "SSII" by IH marketing. As a result, buyers were generally unaware of the actual "Soft-top Safari" name. Eventually the "SS" letters were assumed to stand for "Super Scout", the name this model is called today.
Engines
Engine produced by International Harvester:
- IH 4-152
- IH 4-196
- IH V-266
- IH V-304 (Note: This is NOT the same motor as the AMC 304 V8)
- IH V-345
- IH V-392 (Note: While based on the same block as the 304 and 345, the 392 was not available in Scouts)
built by American Motors Corporation
built by Nissan
- Nissan 6-33 (diesel) (naturally aspirated)
- Nissan 6-33T (turbo diesel1980 only)
International offered the Scout with a variety of engines over its years of production. The Scout 80 (19611965) had the gasoline-powered 152 4-cylinder as its standard engine. From 1965 to 1971 (Models 800, 800A, and 800B), engine options were the gasoline-powered 196 4-cylinder, 232 6-cylinder, 266 V-8, and the 304 V-8. A turbocharged version of the 152 4-cylinder engine was offered from 1965 to 1967. There are rumors that a few early Scouts left the factory with Perkins diesel engines, but these would have been special-order trucks and not a standard option. The Scout II (made between 1971 and 1980) had the following engine options: the 196 4-cylinder, 232 6-cylinder (early production), 258 6-cylinder (later production), 304 V-8, and 345 V-8. At the time, International did not manufacture a diesel engine small enough to be used in the Scout, and so starting in 1976 used the Nissan SD-33 diesel engine as a diesel option. This engine was replaced by the Nissan SD-33T turbodiesel engine in 1980.
Axles and gear ratios
Dana 27 axles were used for the front and rear wheels in the 80 and 800 models until circa 1968. Both front and rear differentials were offset to the passenger side for the purpose of lining up the driveshafts with the Dana 18 transfer case. With the transition to the 800A model, the rear axle was upgraded to a Dana 44, with a centered differential mated to the Dana 20 transfer case (which had replaced the Dana 18). Some Scouts from this transitional time are a mix of old and new designs, with the rear driveshaft running at an angle. The front axle was still a Dana 27 model, though if the buyer ordered the 3500 lb. axle option the 27 was upgraded to a heavier Dana 30 axle with a centered differential. The V8 engine option included an automatic upgrade to the heavier duty Dana 30 axle. The rear axle shafts changed from two pieces to one piece circa 1968 or 1969. A Powr-Lok limited slip differential was provided as an option for both front and rear axles. Common gear ratios are 3.31, 3.73, 4.27, though nearly any ratio was available by special order.
In Scout IIs, Dana 30 front axles and Dana 44 rear axles were standard until 1974, with front Dana 44 axles as a special order. After 1974 Dana 44 front and rear axles became standard on all Scout IIs. Available gear ratios were 2.72, 3.07, 3.31, 3.54, 3.73, 4.09, 4.27 and 4.54. Trak-Lok limited slip differentials were optional.
Axles originally had a tag bolted to their differential cover stamped with their gear ratio, but this tag often rusted off over time or was intentionally removed. The Line Setting Ticket can be checked to identify the axle model, gear ratio, and whether it is equipped with a traction device, using an International parts code book.
Origin
International Harvester had been building trucks, pickups and later Travelalls since 1907. In the late 1950s, they began a design plan to produce a vehicle to compete with the Jeep CJ. By late 1960 the first Scout was available: the Scout 80, with a 1961 model year.
According to Ted Ornas, the chief designer of the Scout,
...the market potential for a 4 wheel drive recreational vehicle was an unknown quantity in the early 1950s. The only such vehicle offered in the post-war period was the Willys Jeep, a version of the military jeep produced for World War II. It was a flat-sided bare-bones product, and American military personal learned to appreciate its ability to maneuver over rough terrain. Sales volume was very low. In early 1958 we were directed to develop a concept proposal to enter this small market of that time. So help me, Mr.Reese, manager of engineering, said 'design something to replace the horse.' There was no product definition to use as a guide. It was even proposed to use the defunct Henry J body tooling. Compound body surfaces were considered too far out for this type of vehicle. The military jeep was thought to have the correct appearance. Our design sketches with the flat-side, no contour look never excited the executive committee. The program began to die. One night while sitting at our kitchen table (full of frustration and desperation), I dashed off this rough sketch on a piece of scrap mat board. It had contoured sides and was designed for plastic tooling. The next morning it was shown to a committee member. He reviewed it with controlled enthusiasm, but revived interest in the program. We were off and running. Goodyear produced many plastic parts for WWII and had formed a large plastic engineering group. We entered a program with them, a scale model was vacuum formed to simulate body assembly. This model received executive approval for appearance. By July 1959, Goodyear completed their costing and, because of the high costs, the plastic program was cancelled. By this time the contoured design met with executive approval and a decision was made to convert the body design to steel. Starting in late July 1959 a full size clay model was completed, and in November 1959, it was approved. Looking back, it was a remarkable program with fast paced engineering and manufacturing developments. The total development time of 24 months was an heroic achievement considering the concept was unique and no in-house engine or manufacturing was available or even considered when the program started.
"The first Scout was introduced in 1960. A concept for its replacement was initiated in 1964 and approved for production in mid 1965. The Scout II was introduced in 1971. The basic sheet metal remained the unchanged until production stopped on October 21, 1980. During the 20 year period (1960-1980) 532,674 Scouts were produced. The Scout, introduced as a commercial utility pickup in 1960, set the stage for future 4-wheel drive recreational vehicles of the '70s, '80s, and '90s.
Scout 80 and Scout 800
Scout 80s were built between 1960 and 1965. These models were identifiable by removable sliding side windows in 19601961 and even some very early 1962 models, a 152 4 cyl. engine, a fold-down windshield, vacuum windshield wipers mounted to the top of the windshield and an IH logo in the center of the grille.
The Scout 800 replaced the 80 in late 1965. 800s were built from late 1965 to 1968. These models had many improvements in comfort and design, including bucket seats, better instrumentation and heating systems, optional rear seats, and optional 196 4-cyl, 232 6-cyl, or 266 V-8 engines. A turbocharged version of the 152 4 cylinder (the 152-T) was offered from 19651967.
1969 saw the introduction of the 800A, which replaced the 800. Improvements included more creature comfort options, a slightly different front end treatment, drivetrain upgrades (heavier rear axle and quieter Dana 20 transfer case) and the 304 V-8 option.
The last of the 800 series was the 800B, available for only part of 1971 before it was replaced with the Scout II. Identical to the 800A other than in minor cosmetic details, it was produced only until the Scout II was in production.
Special packages offered on the Scout 80 through 800 A and B models
The first special package was the "Red Carpet" Series, celebrating the 100,000 Scout manufactured by IH. This model had a red interior with a white exterior, full length headliner and full floor mats, and a special medallion affixed to the door which read, "100,000 Red Carpet Series Scout By International". IH also offered the Scout 800 Sportop, which had an upgraded interior and a unique fiberglass top (it was also available as a soft top) with a slanted back and a continental spare tire kit. The "Champagne Series" Scout was a high-option Scout offered in the Scout 80 and later Scout 800 models. The 800A could be ordered with the Aristocrat, SR-2, or Sno-Star packages, and the 800B was available with the Comanche package. Each of these packages included special paint and decals, chrome trim, sliding travel top windows, and other "high dollar" options such as roof racks, chrome wheels, and upgraded interiors. Line tickets of the special package Scouts (and some non-package units) were often rubber stamped with the words "Doll-Up Scout".
Scout 80 Camper/Motorhome
In the early 1960s International experimented with a camper body permanently mounted to the Scout 80. The roof was raised to nearly double the original height (to allowed standing upright inside), tented sleeping bunks folded out of the sides, and the rear of the body was extended significantly. The tailgate/liftgate system was replaced with one large ambulance-style swinging door. Plans included that the unit could be purchased as a stripped down shell ($960 installed), or as a "deluxe" unit, which included a dinette set, stand up galley, and a screened chemical toilet that retracted into the wall ($1850 installed). The May 1963 issue of Mechanix Illustrated contains a full color add for the Scout Camper on the inside cover, which features two artist's renderings of the unit and a form to fill out and send in for free literature. The camper shows up again in the May 1963 issue of Popular Science, this time in an actual photo as part of a two-page article about pickup campers. The photo proves that at least one unit existed, but it is not known if they were ever produced or available to the public.
Scout II models
Scout II's were manufactured from mid-year 1971 to 1980. The Scout II, Terra and Traveler were produced from 19761980. Terras and Travelers had fiberglass tops; half top for the Terra or full top with hatchback type liftgate on the Traveler. The SSII (Soft-top Safari II) was built from 1977 to 1979 in order to compete with the Jeep CJ. This model included a soft top with soft doors, Jeep style mirrors, plastic door inserts, special plastic grille and a roll bar, among other options. Several SSIIs were champions on the off-road racing circuit during the late 70s. The Scout II is most identifiable by its different front grilles. The 197172 Scout II shared the same grille, three horizontal bars between the headlights and chrome rings around the headlights. 1973 Scout II's had 14 vertical bars between the headlights, a split in the middle, seven bars on each side surrounded by chrome trim pieces and an "International" model plate low on the left side. 197475 Scout II grilles were the same as 1973, with the addition of a vertical bar trim overlay. The 1975 had chrome & black square trim rings around the headlights. 1976 had the same headlight trim rings as 1975, a chrome center grille of 15 horizontal bars split into three sections was used in this year only. 197779 Scout II's used the same grille between the same headlight bezels the new chrome grille had two large horizontal bars with three vertical support lines and the "International" nameplate moved up to the center of the grille on the left side. In 1980, the final year of production for the Scout, the grille was a very distinctive design, available with black or silver, a one piece grille with square headlights, made of ABS plastic. Both grille color options had imprinted chrome trim around the headlights and an "International" name located on the left side.
Scout II disc brakes
Starting with late 1974 Scout IIs disc and power brakes were standard features. Early 1974 models had disc brakes as a rarely selected option.
Shawnee Scout
The Shawnee Scout was to be a trim type and special feature package model produced by Hurst Performance. This model was built by dressing up a black SSII with special tomahawk and feather decals, special seats, a black targa style top, hard tonneau bed cover, and of course a Hurst shifter. Only three or four Shawnee Scouts were produced.
CVI: Custom Vehicles Incorporated
CVI: Custom Vehicles Incorporated (also associated with Good Times, Inc.) was a company (located around the corner from the Ft. Wayne Scout Assembly Plant) that produced special models for IH dealers in 1979 and 1980. These were dressed-up Scout models with special exterior decals and trim, center console coolers, hood scoops, and some editions had plastic window louvers on the rear side glass, fender flares, and two different plastic tailgate inserts. Model names included the Midnitestar, Terrastar, Travelstar, Shadow, Raven, two Classic models, GMS (Green Machine Sport), GMS (Gold Medallion Scout), Hot Stuff, Trailstar, Sportstar, 5.6 Liter & 3.2 Liter models.
The "Selective Edition" Scout II
This was a special package available from the factory. 197879 package order code on the lineticket was 10992. The package included special gold accent stripes, gold spoke wheels with Goodyear Tracker A-Ts, SSII black grille insert, and Sport Steering wheel. Other options available: Choice of powertrain, seats, interior, radios, cruise control, tow packages, AC, all available in exterior colors 1032 Dark Brown, 6027 Dark Blue, 001 Black, 5013 Green. This was available on the Travel top, Traveler and Terra models.
"Spirit of 76" and the "Patriot" special editions
For the USA Bicentennial in 1976, IH produced the Spirit of 76 and the Patriot models. The Spirit of 76 had a special blue soft top and blue/red side applique and was only available on the Scout II. The Spirit also had blue interior, racing-type steering wheel and 17" inch chrome rally wheels. IH data only shows 384 Spirit models ever being built. Lineticket codes included:
10876 for the side applique.
18696 to omit the hard top.
16928 Deluxe interior.
16872 blue interior color.
9219 Winter white exterior paint.
885102 10-15 front tires.
925102 10-15 Rear tires with spare.
29091 7" chrome wheels.
The Patriot had a hard top and the same blue/red side applique, but was available in a Scout II, Terra or Traveler. Sales figures on the Patriot only show 1 Terra, 7 Travelers, and 50+ Scout IIs were manufactured. However there were another undetermined number of Patriots built without Lineticket code designations (the applique was applied at the TSPC (Truck Sales Processing Center)) making it difficult to know just how many were actually built. Nevertheless, both models can be considered extremely rare.
Use in offroad racing
Scout SSIIs took top honors in offroad racing during the late 1970s. In 1977, Jerry Boone, of Parker, Arizona, finished first among 4x4 production vehicles in what is the "Super Bowl" or "Daytona 500" of offroad events, the Baja 1000. This is the most challenging of all off-road competitions. Boone completed the run in 19 hours 58 minutes, crossing the finish line at Ensenada, Mexico, almost 2 hours ahead his closest competitor: a Jeep CJ7. Only nine of 21 vehicles that started the race finished the 1000 kilometer (660.3 mile) course. Boone ran even faster than Class IV modified 4x4 racers. Mr. Boone later revealed that they only had a month to prep a stock SSII for the race and they were unsponsored by IH until after the race. Boone also won in 1978 at Riverside, California.
Sherman Balch, among many other accomplishments in offroad racing, won the off-road "world championship" in 1977 (the renowned S.C.O.R.E. event in Riverside, California). Three other finishers along with Balch also drove Scouts. Balch also won the Baja 1000, the Mint 400 & three grueling events in the fall of 1978 at Lake Geneva, Wisconsin.
Sherman Balch and co-driver James Acker, driving a Scout SSII, went on to win virtually all major off-road races in 1982 offered on the West Coast/Mexico circuit by winning the Baja 250, The Baja 500, The Baja 1000, the Mint 400 and the Parker (Arizona) 400.
The "Midas Edition" Scout II
From 1977 to 1980 IH contracted with Midas Van Conversion Co. of Elkhart, Indiana, to build special luxury models to be offered through its dealers. These vehicles had swivel bucket seats, shag carpet, color keyed interiors, door panels, headliner, grille guards, dual sunroofs, overhead clocks, 3rd seat, reading lights, tinted windows, fender flares, and special side appliques and paint designs. Models included the Family Cruiser (or just Cruiser), the Street Machine, and Off-Road Vehicle. Another company called Van American (Goshen, Indiana) offered similar options to compete with Midas; however these vehicles were only offered for a short time, making them very rare today.
Final Special version
Probably one the rarest models ever produced by IH was the 1980 RS: the Special Limited Edition RS Scout. This package was only available on the Traveler in Tahitian Red. It had special extras inside and out, including polycast wheels with Tahitian Red accent, luxurious plush all-velour russet interior including headliner and visors, special pin striping, wood grain trim instrument panel and shift console, chrome bumpers, tinted glass, and more. Two other special packages offered in 1980 were the 844 and 434 Gold Star Models. 844 offered standard equipment plus a 345 V-8, HD clutch, T428 4 speed transmission, 2.72 rear axle ratio, AM radio, rear seat, hub caps, special black side applique and paint on lower body, and black carpet. 434 offered standard equipment plus 4-196 engine, T332 3 speed transmission, 3:73 rear axle ratio, black vinyl interior, AM radio, rear seat, hub caps, special black side applique and paint on lower body, and black carpet.
Line Setting Ticket
When an IH vehicle was ordered, a factory build or construction sheet was created (when order was sent to the factory) with the new vehicle's VIN or ID number, and all the codes for standard equipment and options that the salesman used to create this vehicle for his customer or inventory. This sheet was used to assemble the vehicle from beginning to finish. After the factory assembled the vehicle and the vehicle was shipped and sold, the Line Setting Ticket identified such things as the engine type, transmission type, drive line, paint codes, gear ratio, and standard and optional equipment specific to that vehicle. This was and still is a very valuable tool when ordering parts later at the dealership by the customer. A very small copy of the Line Ticket was attached to each vehicle in during the building process at the factory. The location of the ticket varied: 19711976 Scout II's had their Lineticket copies mounted under their hoods, attached to the cowl cover panels. 19771980 Scout II's had their copies on the inside of the glove box doors. 19691975 pickups and Travelalls had them attached to the back of the glove boxes; depressing the keeper tabs on each side of the box lets the box swing down to reveal the Line Setting Ticket.
Concept vehicle
IH developed a concept prototype for the next version of the Scout in 1979, but due to the demise of the company, it was never put into production. The second prototype of the concept vehicle is on display at the Auburn Cord Duesenberg Automobile Museum in Auburn, Indiana. It was a two-door with a sloped back window, built on an 100-inch chassis with 162 hp V-8.
External links
International Scout advertisement, Wisconsin Historical Society
|
| |
|
|
