|
|
|
|
Governor (device)
|
| |
|
| |
A governor, or speed limiter, is a device used to measure and regulate the speed of a machine, such as an engine. A classic example is the centrifugal governor, also known as the Watt or fly-ball governor, which uses weights mounted on spring-loaded arms to determine how fast a shaft is spinning, and then uses proportional control to regulate the shaft speed.
lass="link1" onMouseover='showByLink("m1712917",this)' onMouseout='hide("m1712917")'href="http://www.absoluteastronomy.com/topics/Centrifugal_governor">Centrifugal governors were used to regulate the distance and pressure between millstones in windmills since the 17th century.
Discussion
Ask a question about 'Governor (device)' Start a new discussion about 'Governor (device)' Answer questions from other users |
Recent Posts
Encyclopedia
A governor, or speed limiter, is a device used to measure and regulate the speed of a machine, such as an engine. A classic example is the centrifugal governor, also known as the Watt or fly-ball governor, which uses weights mounted on spring-loaded arms to determine how fast a shaft is spinning, and then uses proportional control to regulate the shaft speed.
History
Centrifugal governors were used to regulate the distance and pressure between millstones in windmills since the 17th century. Early steam engines employed a purely reciprocating motion, and were used for pumping water – an application that could tolerate variations in the working speed. It was not until the Scottish engineer James Watt introduced the rotative steam engine, for driving factory machinery, that a constant operating speed became necessary. Between the years 1775 and 1800, Watt, in partnership with industrialist Matthew Boulton, produced some 500 rotative beam engines. At the heart of these engines was Watt’s self-designed "conical pendulum" governor: a set of revolving steel balls attached to a vertical spindle by link arms, where the controlling force consists of the weight of the balls.
Building on Watt’s design was American engineer Willard Gibbs who in 1872 theoretically analyzed Watt’s conical pendulum governor from a mathematical energy balance perspective. During his Graduate school years at Yale, Gibbs observed that the operation of the device in practice was beset with the disadvantages of sluggishness and a tendency to overcorrect for the changes in speed it was supposed to control.
Gibbs theorized that, analogous to the equilibrium of the simple Watt governor (which depends on the balancing of two torques: one due to the weight of the “balls” and the other due to their rotation), thermodynamic equilibrium for any work producing thermodynamic system depends on the balance of two entities. The first is the heat energy supplied to the intermediate substance, and the second is the work energy performed by the intermediate substance. In this case, the intermediate substance is steam. These sorts of theoretical investigations culminated in the 1876 publication of the Gibbs' famous work On the Equilibrium of Heterogeneous Substances and in the construction of the Gibbs’ governor, shown adjacent. These formulations are ubiquitous today in the natural sciences in the form of the Gibbs' free energy equation, which is used to determine the equilibrium of chemical reactions; also known as Gibbs equilibrium.
Automobiles
Automobiles are a common application of governors, and modern automobiles may be equipped with such mechanisms for various reasons. There are two types of automobile governors, one limiting the rotational speed of the engine, the other limiting the speed of the vehicle. In small, low power applications, governors are used to protect the engine from damage due to excessive rotational speed, or pushing the engine past its peak abilities. In larger, higher performance engines governors are used to limit the vehicle speed. Many performance cars are limited to a speed of to limit insurance costs of the vehicle and reduce the risk of tires failing. All heavy vehicles in Europe have by law governors that limits their speeds to (100 km/h for certain buses). Urban public buses often have speed governors which are typically set to between 40 and 55 miles per hour.
The German manufacturers initially started the gentlemen's agreement, since high speeds are more likely on the Autobahn. This was done to reduce the political willpower to introduce a speed limit. German Autobahns are often used officially and unofficially to use such cars to their potential. It should however be realised that according to the German road traffic code, vehicle speed must be appropriate for traffic conditions at all times even on unrestricted stretches of the Autobahn, and if traffic conditions make traveling at high speeds unsafe (e.g. due to heavy traffic or poor weather and/or road conditions), a driver can be fined by the Autobahn police for dangerous driving, even if the Richtgeschwindigkeit reference speed of 130kph / 80 mph was not exceeded.
Today, BMW, Audi, Volkswagen and Mercedes-Benz limit their production cars to . Certain AMG cars and the Mercedes/McLaren SLR are exceptions. The BMW Rolls-Royces are limited to 149 mph (240 km/h). Jaguars, although British, also have a limiter. As do the Swedish Saab and Volvo on cars where it is necessary.
In European markets, GM sometimes choose to discount the agreement, meaning that certain high-powered Opel or Vauxhall cars can exceed the 250 km/h mark, whereas their Cadillacs do not. Ferrari, Lamborghini, Maserati, Porsche, Aston Martin and Bentley also do not limit their cars, at least not to 250 km/h (156 mph). Chryslers in Europe such as the 300C SRT8 have no limiter. High-powered Japanese cars such as the Mitsubishi Evo or Nissan Skyline GT-R have no limiter. The top speed is a strong sales argument, though speeds above 300 km/h (187.5 mph) are not likely reachable on public roads.
Aircraft
Aircraft propellers are another application; The governor senses shaft rpm, and adjusts or controls the angle of the blades to vary the torque load on the engine. Thus as the aircraft speeds up (as in a dive) or slows (in climb) the RPM is held constant.
Small engines
Small engines, such as used to power lawn mowers, portable generators, and lawn and garden tractors, are equipped with a governor to limit the engine to a maximum safe speed when unloaded and to maintain a relatively constant speed despite changes in loading. In the case of generator applications, the engine speed must be closely controlled so the output frequency of the generator will remain reasonably constant.
Small engine governors are typically one of three types:
- Pneumatic: the governor mechanism sense air flow from the flywheel blower used to cool an air-cooled engine. The typical design includes a air vane mounted inside the engine's blower housing and linked to the carburetor's throttle shaft. A spring pulls the throttle open and as the engine gains speed, increased air flow from the blower forces the vane back against the spring, partially closing the throttle. Eventually a point of equilibrium will be reached and the engine will run at a relatively constant speed. Pneumatic governors are simple in design and inexpensive to produce. However, they do not regulate engine speed very accurately and are affected by air density, as well as external conditions that may influence airflow.
- Centrifugal: a flyweight mechanism driven by the engine is linked to the throttle and works against a spring in a fashion similar to that of the pneumatic governor, resulting in essentially identical operation. A centrifugal governor is more complex to design and produce than a pneumatic governor. However, the centrifugal design is more sensitive to speed changes and hence is better suited to engines that experience large fluctuations in loading.
- Electronic: a servo motor is linked to the throttle and controlled by an electronic module that senses engine speed by counting electrical pulses emitted by the ignition system or a magnetic pickup. The frequency of these pulses varies directly with engine speed, allowing the control module to apply a proportional voltage to the servo to regulate engine speed. Due to their sensitivity and rapid response to speed changes, electronic governors are often fitted to engine-driven generators designed to power computer hardware, as the generator's output frequency must be held within narrow limits to avoid malfunction.
See also
|
| |
|
|
.gif)
