GK Wien-Southeast
Encyclopedia
The GK Vienna–Southeast was a back-to-back HVDC station linking the electric power
Electric power
Electric power is the rate at which electric energy is transferred by an electric circuit. The SI unit of power is the watt.-Circuits:Electric power, like mechanical power, is represented by the letter P in electrical equations...

 grids of Austria
Austria
Austria , officially the Republic of Austria , is a landlocked country of roughly 8.4 million people in Central Europe. It is bordered by the Czech Republic and Germany to the north, Slovakia and Hungary to the east, Slovenia and Italy to the south, and Switzerland and Liechtenstein to the...

 and Hungary
Hungary
Hungary , officially the Republic of Hungary , is a landlocked country in Central Europe. It is situated in the Carpathian Basin and is bordered by Slovakia to the north, Ukraine and Romania to the east, Serbia and Croatia to the south, Slovenia to the southwest and Austria to the west. The...

. It operated between June 1993 and October 1996.

Facility

This facility was built by Siemens and had a maximum transfer power of 600 MW with an operation tvoltage of 142 kV. In great extent, it was identical with the HVDC back-to-back station in Etzenricht
GKK Etzenricht
GKK Etzenricht, abbreviation for Gleichstromkurzkupplung) Etzenricht, that means Etzenricht HVDC-back-to-back station was an HVDC back-to-back facility near Etzenricht in the district of Neustadt in Bavaria, Germany. It was built up on area of Etzenricht substation, a 380 kV/220 kV/110...

, which was used for coupling the power grids of Bavaria and Czech and built at the same time. As in this installation, the inverters used 864 thyristors. However at GK Vienna-Southeast were not used as in the HVDC back-to-back station in Etzenricht 6 single-phase transformers, but four three-phase transformers.
While the facility in Etzenricht got obsolete in 1995 after synchronisation of power grids in Western and Eastern Europe, GK Vienna-Southeast remained in service at first, because the direct interconnection of power grids of Austria and Hungary would have caused regulation-technical problems as result of the missing national 380 kV grid in Austria.

These problems were solved in 1996 with the installation of frequency regulation equipment in coal-fired power stations in Southern Poland, so GK Vienna Southeast GK got unessential in October, 1996 and was shut-down.

The shut-down of GK Vienna-Southeast increased the maximum transfer power of the 380-kV line Vienna southeast - Györ to 1514 MW.

After its shut-down it was planned to dismantle GK Vienna-Southeast and rebuilt it in East Europe at a location close to the border to the CIS countries for the realization of an interconnection between the power grid of central Europe and the CIS countries. However this was not done and so the installation was dismantled in 2007/08.

However, one of the harmonic waves filter was preserved as a monument.

On the site a new building for the control centre of the power grid of Austria was built. The static inverter hall was not demolished, but turned into a workshop.

At the third ( before decommissioning of GK Wien–Southeast second) pylon, which is situated 260 metres south of the area of GK Wien–Southeast, the 26 kilometres long line section starts, where it is together with the two 380 kV-circuits of the powerline to Stixneusiedl substation installed on the same pylons. Stixneusiedl substation is passed by the line approximately 50 metres southwards. After further 37.5 kilometres, the line passes the border to Hungary. At the beginning of 2010 the second 380-kV circuit of the line from Vienna-Southeast to Györ substation was installed, for which the pylons of the whole line are already designed.

External links

  • Google Maps: Satellite View
  • https://www.energy-portal.siemens.com/static/hq/de/products_solutions/11076_97301_1993%20wien%20suedost.html
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK