|
|
|
|
Capstan (nautical)
|
| |
|
| |
A capstan is a rotating machine used to apply force to another element, notably used on board ship and on dock walls, for heaving-in or veering ropes, cables, and hawsers.
word, connected with the Old French capestan or cabestan(t), from Old Provençal cabestan, from capestre "pulley cord,", from Latin capistrum, -a halter, from capere, to take hold of, seems to have come into English (14th century) from French or Spanish shipmen at the time of the Crusades.
Discussion
Ask a question about 'Capstan (nautical)' Start a new discussion about 'Capstan (nautical)' Answer questions from other users |
Encyclopedia
A capstan is a rotating machine used to apply force to another element, notably used on board ship and on dock walls, for heaving-in or veering ropes, cables, and hawsers.
History
The word, connected with the Old French capestan or cabestan(t), from Old Provençal cabestan, from capestre "pulley cord,", from Latin capistrum, -a halter, from capere, to take hold of, seems to have come into English (14th century) from French or Spanish shipmen at the time of the Crusades. The conjecture that it came from the Spanish cabra, goat, and estanto, standing, is untenable.
Early form
In its earliest form, the capstan consisted of a timber mounted vertically through a vessel's structure which was free to rotate. Levers, known as bars, were inserted through holes at the top of the timber and used to turn the capstan. A rope wrapped several turns around the drum was thus hauled upon. A rudimentary ratchet was provided to hold the tension. The ropes were always wound in a clockwise direction (seen from above).
Later form
Capstans evolved to consist of a wooden drum or barrel mounted on an iron axle. Two barrels on a common axle were used frequently to allow men on two decks to apply force to the bars. Later capstans were made entirely of iron, with gearing in the head providing a mechanical advantage when the bars were pushed counterclockwise. One form of capstan was connected by a shaft and gears to an anchor windlass on the deck below.
Modern form
Modern capstans are powered electrically, hydraulically, pneumatically, or via an internal combustion engine. Typically, a gearbox is used which trades reduced speed, relative to the prime mover, for increased torque.
Similar machines
A capstan differs from a windlass, which is used for similar purposes, in having the axis on which the rope is wound vertical instead of horizontal. In yachting terminology, winches function on the same principle as capstans, though in industrial applications, the term winch generally implies a machine which stores the rope on a drum.
Use on land
- See also:Locomotive winch
Hydraulically-powered capstans were sometimes used in railway goods yards for shunting. One example was Broad Street goods station in London. The yard was on a deck above some warehouses, and the deck was not strong enough to carry a locomotive, so ropes and capstans were used instead.
Hydraulic Capstans are also used on docks to pull the mooring lines of ships.
|
| |
|
|
.gif)
