Brake van
Encyclopedia
Brake van and guard's van are terms used mainly in the UK, Australia
and India
for a railway vehicle
equipped with a hand brake
which can be applied by the guard
. The equivalent North America
n term is caboose
, but a British brake van and a caboose are very different in appearance, because the former usually has only four wheels while the latter usually has bogie
s.
Many British freight trains formerly had no continuous brake so the only available brakes were those on the locomotive
and the brake van. Because of this shortage of brake power the speed was restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train so that both portions of the train could be brought to a stand in the event of a coupling breaking.
When freight trains started having continuous braking, brake vans lost their importance, and were discontinued by many railways. However, they still continue on some important railways, such as the Indian Railways
, besides the heritage railway
s.
The first railways, such as the pioneering Liverpool and Manchester Railway
of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle
-like device that draws the vehicles together. Vehicles have buffers
, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, and hence the whole train reliant on the braking capacity of the locomotive, train lengths were restricted.
To allow for longer length trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans." The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive. Early railway couplings
had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards.
Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes:
While the UK railway system persisted until post-privatisation in 1947 with "unfitted" (non-continuosly braked) trains and inefficient couplings, other systems — such as the North American adoption of the Janney coupler
— overcame the same railway safety issues in a different manner.
Firstly, and most importantly, the guard would use the brake van's brakes to assist with keeping the train under control on downwards gradients and whenever he could see that the locomotive's crew was attempting to slow the train. Route knowledge would allow the guard to initiate the braking before the driver. To aid in this, signalling regulations mandated that signals be left at clear until the entirety of a train (including guard's van) had passed, as the guard would immediately apply brakes upon seeing a signal at danger.
Secondly, the wheel handbrake could be screwed down to keep the loose screw couplings taut between unfitted wagons, to minimise the risk of snapped broken couplings from the locomotive "snatching" or jerking, which was particularly a problem as locomotives became more powerful. As breaking couplings on unfitted trains when starting were a fairly common occurrence, train crews were given specific instruction. Upon starting a freight train, rules mandated that footplate crew look back on their train towards the brake van, waiting for the guard to signal (by flag or lamp) that the entire train was moving and that all couplings were taut, before accelerating to higher speeds.
A later job of the guard was the provision of side lamps on brake vans. All three side lamps are visible in this picture: the white lamp is the tail lamp, whilst the grey lamps are the side lamps, along with the standard tail lamp (showing red to the rear and sides) required on the rear of every train. The side lamps showed a white light towards the front and a red light to the side/rear. The front-facing lamps were an indication to the locomotive crew that the train was still complete, whilst the provision of extra red lights to the rear was an additional safety measure. Due to the very low chance of all three lights being out at once, it was stipulated that a freight train passing without any lamps on the rear had split and that the rear portion was potentially running away.
, freight trains without a continuous train braking system in either the whole train or the rearmost section of the train ("unfitted" or "partly fitted" respectively in UK railway parlance) were still prevalent in the 1970s but mostly eliminated by the 1980s.
Early break vans were heavily weighted and adapted open freight wagons, equipped with an externally mounted hand-operated brake acting on all four wheels. The term brake van began to be adopted from the 1870s onwards, when bespoke designed vehicles had a specific hut added to house the guard away from the weather. In keeping with tradition, most brake vans had an open area, but from the 1870s onwards this "veranda" became in part enclosed through the addition of a roof. Some vans became fully enclosed, but were equipped at each end with windows to allow the guard to view the entire train.
All of the operating equipment, specifically the brakes and sand boxes to improve traction, were located in the open area of the bake van. Brakes were normally controlled using a hand wheel mounted within the veranda, although some early designs continued with an externally-mounted shaft. To improve the guard's visibility, many were fitted with look-outs on the roof, but side look-outs (termed "duckets") were the more common. The North Eastern Railway
, Great Central Railway
, London Brighton and South Coast Railway and the Lancashire & Yorkshire Railway all built brake vans with a raised look-out at one end of the roof.
Two issues always added to brake power, the purpose of a brake van: wheels, and weight. Hence many companies tried both approaches to improve their brake vans. Brake vans often had a significant amount of ballast, in the form of concrete, cast iron
or water tanks built into their structure, to increase the available braking effort.
Whilst most brake vans had two axles/four wheels, many railway companies built brake vans with three axles/six wheels. The Great Northern Railway
built a few eight wheelers for very heavy coal trains, the only rigid eight wheeler vehicles built in the UK. In the 1930s, the London Midland and Scottish Railway built three bespoke twin-bogied vans (four axles, eight wheels), for use on a particular branch line, where they replaced pairs of four wheeled vans. The design covered the entire chassis length, with two extended verandas on either side of a cabin equipped with twin duckets.
To improve braking further, some LMS and LNER brake vans were fitted with vacuum brake
s in addition to their normal brake, which could be operated by the guard. Almost all War Department
brake vans were fitted with vacuum cylinders, as they were exclusively used on ammunition trains. The Southern Railway
built some twin-bogie brake vans on redundant electric locomotive chassis, termed the "Queen Mary" brake vans. Designed for high speed operation on milk and parcels trains rather than stopping power, they had a lengthened cabin but did not cover the entire twin-bogie chassis.
had reduced by two-thirds the amount of trackage in the UK; resultantly, most steam locomotives had been withdrawn; and most British Railways standard-design diesel and electric locomotives had double-ended cabs. Therefore there was no operational need for so many brake vans, and many types were withdrawn. In 1985 rail unions agreed to single man operation of some freight trains, the first time trains had not had a guard on board for over one hundred and fifty years. Brake vans were still required on trains carrying dangerous chemicals up to the late 1990s.
or Network Rail
in certain special cases, for example in trains with unusual cargoes or track maintenance trains, or when one of the few single cabbed locos are used such as the British Rail Class 20
. The nearest equivalent to a brake van still in use on main line British railways is the Driving Van Trailer
(DVT), which is used on locomotive hauled trains to control the locomotive from the other end of the train in a push-pull
configuration, removing the need for the locomotive to run around its train at termini. Although the DVT has braking capability of its own, this is incidental, as the vehicle's primary purpose is to allow the train to be driven from the opposite end of the train from the locomotive, as well as providing accommodation for bulky luggage.
Brake vans are a common sight on many heritage railway
s. On occasion, multiple brake vans will be coupled together in what is known as a "brake van special" for people to ride in.
, brake vans are still in use to a great extent on passenger trains and goods trains (freight trains). The brake van in the passenger trains (usually the first and last coaches in the train) is a part of a coach and consists of an enclosed room/cabin with two small seats faced opposite to each other, one seat having the writing table for the guard to assist writing and working his train, the opposite seat being a spare. The van also comprises a small lavatory. A special feature of the passenger brake van is a small dog box where a passenger can carry their pet along with them while they travel in the same train in a different coach. The guard generally remains responsible for the water and pet food while the train is moving, and there are features to the dog box to allow the same. The brake van also contains a stretcher, ETL box (Emergency Train Lighting), a stand to hold the lamp signal during the night. The vacuum or air pressure gauge is hosted in front of the guard's seat with a lever to operate it in case of emergency. There is a hand brake which can be used in case of high emergency. The remaining part of the coach consists of space for carrying parcels and small goods. It also has seating for ladies or for the disabled (wheelchair friendly).
The goods brake van in India is less attractive, is generally the last bogie on the train, open on both sides, does not necessarily have interior lighting/lamps, but it does house a small WC lavatory seat for the guard owing to their long hours on freight trains. The van is less secure and has fewer features than the passenger brake van. Eight-wheeled brake vans were introduced recently to improve the riding comfort for the guards.
passenger brake vans are used as the basis of preserved steam locomotive support coaches.
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...
and India
Indian Railways
Indian Railways , abbreviated as IR , is a departmental undertaking of Government of India, which owns and operates most of India's rail transport. It is overseen by the Ministry of Railways of the Government of India....
for a railway vehicle
Rolling stock
Rolling stock comprises all the vehicles that move on a railway. It usually includes both powered and unpowered vehicles, for example locomotives, railroad cars, coaches and wagons...
equipped with a hand brake
Hand brake
In cars, the hand brake is a latching brake usually used to keep the car stationary, and in manual transmission vehicles, as an aid to starting the vehicle from stopped when going up an incline - with one foot on the clutch , the other on the accelerator In cars, the hand brake (emergency brake,...
which can be applied by the guard
Conductor (transportation)
A conductor is a member of a railway train's crew that is responsible for operational and safety duties that do not involve the actual operation of the train. The title of conductor is most associated with railway operations in North America, but the role of conductor is common to railways...
. The equivalent North America
North America
North America is a continent wholly within the Northern Hemisphere and almost wholly within the Western Hemisphere. It is also considered a northern subcontinent of the Americas...
n term is caboose
Caboose
A caboose is a manned North American rail transport vehicle coupled at the end of a freight train. Although cabooses were once used on nearly every freight train, their use has declined and they are seldom seen on trains, except on locals and smaller railroads.-Function:The caboose provided the...
, but a British brake van and a caboose are very different in appearance, because the former usually has only four wheels while the latter usually has bogie
Bogie
A bogie is a wheeled wagon or trolley. In mechanics terms, a bogie is a chassis or framework carrying wheels, attached to a vehicle. It can be fixed in place, as on a cargo truck, mounted on a swivel, as on a railway carriage/car or locomotive, or sprung as in the suspension of a caterpillar...
s.
Many British freight trains formerly had no continuous brake so the only available brakes were those on the locomotive
Locomotive
A locomotive is a railway vehicle that provides the motive power for a train. The word originates from the Latin loco – "from a place", ablative of locus, "place" + Medieval Latin motivus, "causing motion", and is a shortened form of the term locomotive engine, first used in the early 19th...
and the brake van. Because of this shortage of brake power the speed was restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train so that both portions of the train could be brought to a stand in the event of a coupling breaking.
When freight trains started having continuous braking, brake vans lost their importance, and were discontinued by many railways. However, they still continue on some important railways, such as the Indian Railways
Indian Railways
Indian Railways , abbreviated as IR , is a departmental undertaking of Government of India, which owns and operates most of India's rail transport. It is overseen by the Ministry of Railways of the Government of India....
, besides the heritage railway
Heritage railway
thumb|right|the Historical [[Khyber train safari|Khyber Railway]] goes through the [[Khyber Pass]], [[Pakistan]]A heritage railway , preserved railway , tourist railway , or tourist railroad is a railway that is run as a tourist attraction, in some cases by volunteers, and...
s.
Origin
Railways were a formalised development of industrial tramways, which had found need on occasions to add additional braking capacity by adding an empty truck to the rear of a group of tramcars. This allowed the "locomotive" — often a cableway powered by a steam engine at the surface — to operate both safely and more importantly at higher speed.The first railways, such as the pioneering Liverpool and Manchester Railway
Liverpool and Manchester Railway
The Liverpool and Manchester Railway was the world's first inter-city passenger railway in which all the trains were timetabled and were hauled for most of the distance solely by steam locomotives. The line opened on 15 September 1830 and ran between the cities of Liverpool and Manchester in North...
of 1830, used a version of the tramways buffer and chain coupling, termed a screw-coupling. Vehicles are coupled by hand using a hook and links with a turnbuckle
Turnbuckle
A turnbuckle, stretching screw or bottlescrew is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eyelets, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a...
-like device that draws the vehicles together. Vehicles have buffers
Buffer (rail transport)
A buffer is a part of the buffers-and-chain coupling system used on the railway systems of many countries, among them most of those in Europe, for attaching railway vehicles to one another....
, one at each corner on the ends, which are pulled together and compressed by the coupling device. With no continuous brake across the entire train, and hence the whole train reliant on the braking capacity of the locomotive, train lengths were restricted.
To allow for longer length trains, early railway companies from the 1840s onwards began replicating industrial tramway practises, by adding "break vans." The term was derived from their name on the industrial tramways, in which they controlled the (residual) train if there was a "break" in the linkage to the locomotive. Early railway couplings
Coupling (railway)
A coupling is a mechanism for connecting rolling stock in a train. The design of the coupler is standard, and is almost as important as the railway gauge, since flexibility and convenience are maximised if all rolling stock can be coupled together.The equipment that connects the couplings to the...
had been found to be prone to breakages. The term was only replaced by "brake van" from the 1870s onwards.
Because of the combined risks of shortage of brake power and breaking couplings, the speed of freight trains was initially restricted to 25 mph (40 km/h). The brake van was marshalled at the rear of the train, and served two purposes:
- Provided additional braking for 'unfitted' goods trains
- Put a man (the guard) at the rear of the train, who could take action in the event of a breakdown or accident.
While the UK railway system persisted until post-privatisation in 1947 with "unfitted" (non-continuosly braked) trains and inefficient couplings, other systems — such as the North American adoption of the Janney coupler
Janney coupler
The Janney coupler, also known as a knuckle coupler, buckeye coupler, alliance coupler and AAR coupler is an automatic coupler patented by Eli H...
— overcame the same railway safety issues in a different manner.
The Guard's job
On unfitted trains, the brake van has several purposes, and hence jobs for the guard.Firstly, and most importantly, the guard would use the brake van's brakes to assist with keeping the train under control on downwards gradients and whenever he could see that the locomotive's crew was attempting to slow the train. Route knowledge would allow the guard to initiate the braking before the driver. To aid in this, signalling regulations mandated that signals be left at clear until the entirety of a train (including guard's van) had passed, as the guard would immediately apply brakes upon seeing a signal at danger.
Secondly, the wheel handbrake could be screwed down to keep the loose screw couplings taut between unfitted wagons, to minimise the risk of snapped broken couplings from the locomotive "snatching" or jerking, which was particularly a problem as locomotives became more powerful. As breaking couplings on unfitted trains when starting were a fairly common occurrence, train crews were given specific instruction. Upon starting a freight train, rules mandated that footplate crew look back on their train towards the brake van, waiting for the guard to signal (by flag or lamp) that the entire train was moving and that all couplings were taut, before accelerating to higher speeds.
A later job of the guard was the provision of side lamps on brake vans. All three side lamps are visible in this picture: the white lamp is the tail lamp, whilst the grey lamps are the side lamps, along with the standard tail lamp (showing red to the rear and sides) required on the rear of every train. The side lamps showed a white light towards the front and a red light to the side/rear. The front-facing lamps were an indication to the locomotive crew that the train was still complete, whilst the provision of extra red lights to the rear was an additional safety measure. Due to the very low chance of all three lights being out at once, it was stipulated that a freight train passing without any lamps on the rear had split and that the rear portion was potentially running away.
Great Britain
Past
In Great BritainGreat Britain
Great Britain or Britain is an island situated to the northwest of Continental Europe. It is the ninth largest island in the world, and the largest European island, as well as the largest of the British Isles...
, freight trains without a continuous train braking system in either the whole train or the rearmost section of the train ("unfitted" or "partly fitted" respectively in UK railway parlance) were still prevalent in the 1970s but mostly eliminated by the 1980s.
Early break vans were heavily weighted and adapted open freight wagons, equipped with an externally mounted hand-operated brake acting on all four wheels. The term brake van began to be adopted from the 1870s onwards, when bespoke designed vehicles had a specific hut added to house the guard away from the weather. In keeping with tradition, most brake vans had an open area, but from the 1870s onwards this "veranda" became in part enclosed through the addition of a roof. Some vans became fully enclosed, but were equipped at each end with windows to allow the guard to view the entire train.
All of the operating equipment, specifically the brakes and sand boxes to improve traction, were located in the open area of the bake van. Brakes were normally controlled using a hand wheel mounted within the veranda, although some early designs continued with an externally-mounted shaft. To improve the guard's visibility, many were fitted with look-outs on the roof, but side look-outs (termed "duckets") were the more common. The North Eastern Railway
North Eastern Railway
North Eastern Railway could refer to:*North Eastern Railway *North Eastern Railway *North Eastern Railway *North Eastern Railway...
, Great Central Railway
Great Central Railway
The Great Central Railway was a railway company in England which came into being when the Manchester, Sheffield and Lincolnshire Railway changed its name in 1897 in anticipation of the opening in 1899 of its London Extension . On 1 January 1923, it was grouped into the London and North Eastern...
, London Brighton and South Coast Railway and the Lancashire & Yorkshire Railway all built brake vans with a raised look-out at one end of the roof.
Two issues always added to brake power, the purpose of a brake van: wheels, and weight. Hence many companies tried both approaches to improve their brake vans. Brake vans often had a significant amount of ballast, in the form of concrete, cast iron
Cast iron
Cast iron is derived from pig iron, and while it usually refers to gray iron, it also identifies a large group of ferrous alloys which solidify with a eutectic. The color of a fractured surface can be used to identify an alloy. White cast iron is named after its white surface when fractured, due...
or water tanks built into their structure, to increase the available braking effort.
Whilst most brake vans had two axles/four wheels, many railway companies built brake vans with three axles/six wheels. The Great Northern Railway
Great Northern Railway (Great Britain)
The Great Northern Railway was a British railway company established by the Great Northern Railway Act of 1846. On 1 January 1923 the company lost its identity as a constituent of the newly formed London and North Eastern Railway....
built a few eight wheelers for very heavy coal trains, the only rigid eight wheeler vehicles built in the UK. In the 1930s, the London Midland and Scottish Railway built three bespoke twin-bogied vans (four axles, eight wheels), for use on a particular branch line, where they replaced pairs of four wheeled vans. The design covered the entire chassis length, with two extended verandas on either side of a cabin equipped with twin duckets.
To improve braking further, some LMS and LNER brake vans were fitted with vacuum brake
Vacuum brake
The vacuum brake is a braking system employed on trains and introduced in the mid-1860s. A variant, the automatic vacuum brake system, became almost universal in British train equipment and in those countries influenced by British practice. Vacuum brakes also enjoyed a brief period of adoption in...
s in addition to their normal brake, which could be operated by the guard. Almost all War Department
War Department
War Department may refer to:* War Department * United States Department of War - See also :* War Office , a former department of the British Government...
brake vans were fitted with vacuum cylinders, as they were exclusively used on ammunition trains. The Southern Railway
Southern Railway (Great Britain)
The Southern Railway was a British railway company established in the 1923 Grouping. It linked London with the Channel ports, South West England, South coast resorts and Kent...
built some twin-bogie brake vans on redundant electric locomotive chassis, termed the "Queen Mary" brake vans. Designed for high speed operation on milk and parcels trains rather than stopping power, they had a lengthened cabin but did not cover the entire twin-bogie chassis.
Post-Beeching Axe decline
In 1968, the requirement for fully fitted freight trains to end with a guard's van was lifted, and the guard was allowed to ride in the rearmost locomotive cab, giving a good view of the whole train. By this time the Beeching AxeBeeching Axe
The Beeching Axe or the Beeching Cuts are informal names for the British Government's attempt in the 1960s to reduce the cost of running British Railways, the nationalised railway system in the United Kingdom. The name is that of the main author of The Reshaping of British Railways, Dr Richard...
had reduced by two-thirds the amount of trackage in the UK; resultantly, most steam locomotives had been withdrawn; and most British Railways standard-design diesel and electric locomotives had double-ended cabs. Therefore there was no operational need for so many brake vans, and many types were withdrawn. In 1985 rail unions agreed to single man operation of some freight trains, the first time trains had not had a guard on board for over one hundred and fifty years. Brake vans were still required on trains carrying dangerous chemicals up to the late 1990s.
Present
Presently, brake vans are only deemed necessary by HM Railway InspectorateHM Railway Inspectorate
Established in 1840, HM Railway Inspectorate was the British organisation responsible for overseeing safety on Britain's railways and tramways...
or Network Rail
Network Rail
Network Rail is the government-created owner and operator of most of the rail infrastructure in Great Britain .; it is not responsible for railway infrastructure in Northern Ireland...
in certain special cases, for example in trains with unusual cargoes or track maintenance trains, or when one of the few single cabbed locos are used such as the British Rail Class 20
British Rail Class 20
The British Rail Class 20, otherwise known as an English Electric Type 1, is a class of diesel-electric locomotive. In total, 228 locomotives in the class were built by English Electric between 1957 and 1968, the large number being in part because of the failure of other early designs in the same...
. The nearest equivalent to a brake van still in use on main line British railways is the Driving Van Trailer
Driving Van Trailer
A Driving Van Trailer is a purpose-built railway vehicle that allows the driver to operate a locomotive at the opposite end of a train. Trains operating with a DVT therefore do not require the locomotive to be moved around to the other end of the train at terminal stations...
(DVT), which is used on locomotive hauled trains to control the locomotive from the other end of the train in a push-pull
Push-pull train
Push–pull is a mode of operation for locomotive-hauled trains allowing them to be driven from either end.A push–pull train has a locomotive at one end of the train, connected via some form of remote control, such as multiple-unit train control, to a vehicle equipped with a control cab at the other...
configuration, removing the need for the locomotive to run around its train at termini. Although the DVT has braking capability of its own, this is incidental, as the vehicle's primary purpose is to allow the train to be driven from the opposite end of the train from the locomotive, as well as providing accommodation for bulky luggage.
Brake vans are a common sight on many heritage railway
Heritage railway
thumb|right|the Historical [[Khyber train safari|Khyber Railway]] goes through the [[Khyber Pass]], [[Pakistan]]A heritage railway , preserved railway , tourist railway , or tourist railroad is a railway that is run as a tourist attraction, in some cases by volunteers, and...
s. On occasion, multiple brake vans will be coupled together in what is known as a "brake van special" for people to ride in.
Australia
In Australia, brake vans (or guard's vans; both terms were in common use) were often also used for carrying parcels and light freight and usually had large compartments and loading doors for such items. Some of the larger vans also included a compartment for passengers travelling on goods services or drovers travelling with their livestock.India
In IndiaIndian Railways
Indian Railways , abbreviated as IR , is a departmental undertaking of Government of India, which owns and operates most of India's rail transport. It is overseen by the Ministry of Railways of the Government of India....
, brake vans are still in use to a great extent on passenger trains and goods trains (freight trains). The brake van in the passenger trains (usually the first and last coaches in the train) is a part of a coach and consists of an enclosed room/cabin with two small seats faced opposite to each other, one seat having the writing table for the guard to assist writing and working his train, the opposite seat being a spare. The van also comprises a small lavatory. A special feature of the passenger brake van is a small dog box where a passenger can carry their pet along with them while they travel in the same train in a different coach. The guard generally remains responsible for the water and pet food while the train is moving, and there are features to the dog box to allow the same. The brake van also contains a stretcher, ETL box (Emergency Train Lighting), a stand to hold the lamp signal during the night. The vacuum or air pressure gauge is hosted in front of the guard's seat with a lever to operate it in case of emergency. There is a hand brake which can be used in case of high emergency. The remaining part of the coach consists of space for carrying parcels and small goods. It also has seating for ladies or for the disabled (wheelchair friendly).
The goods brake van in India is less attractive, is generally the last bogie on the train, open on both sides, does not necessarily have interior lighting/lamps, but it does house a small WC lavatory seat for the guard owing to their long hours on freight trains. The van is less secure and has fewer features than the passenger brake van. Eight-wheeled brake vans were introduced recently to improve the riding comfort for the guards.
Passenger brake van
A passenger brake van originally served the same purpose as a goods brake van, but, when continuous brakes became standard on passenger trains, its use changed. The hand brake is still fitted but is for emergency use, and for when the train is parked without a locomotive present. The vehicle also provides a compartment for the guard, a luggage compartment, and sometimes passenger accommodation as well.Examples
Examples of British passenger brake vans include:- Brake GangwayedBrake GangwayedThe Brake Gangwayed or BG coach is a type of British Railways Mark 1 passenger brake van. It has a guard's compartment in the centre and two large areas either side for storing luggage...
- Brake Standard OpenBrake Standard OpenA Brake Standard Open or BSO, is a type of railway carriage used by British Rail. Both Mark 1 and Mark 2 types were built. Each consists of a standard class open passenger saloon with a centre aisle, a guard's compartment with hand brake and a lockable luggage compartment.A number of Mark 1 and...
- Brake Standard Open (Micro-Buffet)Brake Standard Open (Micro-Buffet)A Brake Standard Open , often abbreviated to BSOT or BSO, is a type of railway carriage used by British Rail.These coaches were converted from a Brake Standard Open , by replacing one passenger seating bay with a counter for serving food, and space for a trolley for light refreshments...
Support coaches
In the UK, converted British Railways Mark 1British Railways Mark 1
British Railways Mark 1 was the family designation for the first standardised designs of railway carriages built by British Railways. Following nationalisation in 1948, BR had continued to build carriages to the designs of the "Big Four" companies , and the Mark 1 was intended to be the...
passenger brake vans are used as the basis of preserved steam locomotive support coaches.