Acetic acid (data page)
Encyclopedia
Material Safety Data Sheet
The handling of this chemical may incur notable safety precautions. It is highly recommend that you seek the Material Safety Datasheet (MSDS
Material safety data sheet
A Material Safety Data Sheet is a form with data regarding the properties of a particular substance....
) for this chemical from a reliable source and follow its directions.
Structure and properties
Structure and properties | |||||||||
---|---|---|---|---|---|---|---|---|---|
Index of refraction, nD | 1.3716 | ||||||||
Dielectric constant Dielectric constant The relative permittivity of a material under given conditions reflects the extent to which it concentrates electrostatic lines of flux. In technical terms, it is the ratio of the amount of electrical energy stored in a material by an applied voltage, relative to that stored in a vacuum... , εr |
6.15 ε0 at 20 °C | ||||||||
Bond strength | ? | ||||||||
Bond length Bond length - Explanation :Bond length is related to bond order, when more electrons participate in bond formation the bond will get shorter. Bond length is also inversely related to bond strength and the bond dissociation energy, as a stronger bond will be shorter... |
? | ||||||||
Bond angle | ? | ||||||||
Magnetic susceptibility Magnetic susceptibility In electromagnetism, the magnetic susceptibility \chi_m is a dimensionless proportionality constant that indicates the degree of magnetization of a material in response to an applied magnetic field... |
? | ||||||||
Surface tension Surface tension Surface tension is a property of the surface of a liquid that allows it to resist an external force. It is revealed, for example, in floating of some objects on the surface of water, even though they are denser than water, and in the ability of some insects to run on the water surface... |
26.6 dyn/cm at 30°C | ||||||||
Viscosity Viscosity Viscosity is a measure of the resistance of a fluid which is being deformed by either shear or tensile stress. In everyday terms , viscosity is "thickness" or "internal friction". Thus, water is "thin", having a lower viscosity, while honey is "thick", having a higher viscosity... |
|
||||||||
Thermodynamic properties
Phase behavior | |
---|---|
Triple point Triple point In thermodynamics, the triple point of a substance is the temperature and pressure at which the three phases of that substance coexist in thermodynamic equilibrium... |
289.8 K (16.7 °C), ? Pa |
Critical point Critical point (thermodynamics) In physical chemistry, thermodynamics, chemistry and condensed matter physics, a critical point, also called a critical state, specifies the conditions at which a phase boundary ceases to exist... |
593 K (320 °C), 57.8 bar |
Eutectic point Eutectic point A eutectic system is a mixture of chemical compounds or elements that has a single chemical composition that solidifies at a lower temperature than any other composition. This composition is known as the eutectic composition and the temperature is known as the eutectic temperature... with water |
–26.7 °C |
Std enthalpy change of fusionΔfusH |
+11.7 kJ/mol |
Std entropy change of fusion Standard entropy change of fusion The entropy of fusion is the increase in entropy when melting a substance. This is always positive since the degree of disorder increases in the transition from an organized crystalline solid to the disorganized structure of a liquid... ΔfusS |
40.5 J/(mol·K) |
Std enthalpy change of vaporization Standard enthalpy change of vaporization The enthalpy of vaporization, , also known as the heat of vaporization or heat of evaporation, is the energy required to transform a given quantity of a substance into a gas at a given pressure .It is often measured at the normal boiling point of a substance; although tabulated values are usually... ΔvapH |
+23.7 kJ/mol |
Std entropy change of vaporization Standard entropy change of vaporization The entropy of vaporization is the increase in entropy when vaporizing a substance. This is always positive since the degree of disorder increases in the transition from an organized crystalline solid or a slightly less organized liquid to the extremely disorganized structure of a gas... ΔvapS |
? J/(mol·K) |
Solid properties | |
Std enthalpy change of formation Standard enthalpy change of formation The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy that accompanies the formation of 1 mole of a substance in its standard state from its constituent elements in their standard states... ΔfH |
? kJ/mol |
Standard molar entropy Standard molar entropy In chemistry, the standard molar entropy is the entropy content of one mole of substance, under standard conditions .... S |
? J/(mol K) |
Heat capacity Heat capacity Heat capacity , or thermal capacity, is the measurable physical quantity that characterizes the amount of heat required to change a substance's temperature by a given amount... cp |
? J/(mol K) |
Liquid properties | |
Std enthalpy change of formation Standard enthalpy change of formation The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy that accompanies the formation of 1 mole of a substance in its standard state from its constituent elements in their standard states... ΔfH |
−483.5 kJ/mol |
Standard molar entropy Standard molar entropy In chemistry, the standard molar entropy is the entropy content of one mole of substance, under standard conditions .... S |
158.0 J/(mol K) |
Enthalpy of combustion, ΔcH |
–876.1 kJ/mol |
Heat capacity Heat capacity Heat capacity , or thermal capacity, is the measurable physical quantity that characterizes the amount of heat required to change a substance's temperature by a given amount... cp |
123.1 J/(mol K) |
Gas properties | |
Std enthalpy change of formation Standard enthalpy change of formation The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy that accompanies the formation of 1 mole of a substance in its standard state from its constituent elements in their standard states... ΔfH |
–438.1 kJ/mol |
Standard molar entropy Standard molar entropy In chemistry, the standard molar entropy is the entropy content of one mole of substance, under standard conditions .... S |
195 J/(mol K) |
Heat capacity Heat capacity Heat capacity , or thermal capacity, is the measurable physical quantity that characterizes the amount of heat required to change a substance's temperature by a given amount... cp |
63.4 J/(mol K) |
van der Waals' constants Van der Waals equation The van der Waals equation is an equation of state for a fluid composed of particles that have a non-zero volume and a pairwise attractive inter-particle force It was derived by Johannes Diderik van der Waals in 1873, who received the Nobel prize in 1910 for "his work on the equation of state for... |
a = 1782.3 L2 kPa/mol2 b = 0.1068 liter per mole |
Vapor pressure of liquid
{||-
|
{| border="1" cellspacing="0" cellpadding="6" style="margin: 0 0 0 0.5em; background: white; border-collapse: collapse; border-color: #C0C090;"
|-
| | P in mm Hg || 1 || 10 || 40 || 100 || 400 || 760 || 1520 || 3800 || 7600 || 15200 || 30400|| 45600
|-
| | T in °C || –17.2 || 17.5 || 43.0 || 63.0 || 99.0 || 118.1 || 143.5 || 180.3 || 214.0 || 252.0 || 297.0 || —
|}
Table data obtained from CRC Handbook of Chemistry and Physics 44th ed.
{|
|
|
|}
Distillation data
{| border="1" cellspacing="0" cellpadding="6" style="margin: 0 0 0 0.5em; background: ; border-collapse: collapse; border-color: ;"|-
| bgcolor="#D0D0D0" align="center" colspan="3"| Vapor-liquid Equilibrium for Acetic acid/Water
P = 760 mm Hg
|-
! rowspan="2" | BP
Temp.
°C
! colspan="2" | % by mole water
|-
! liquid !! vapor
|-
| 116.5 || 2.2 || 5.8
|-
| 114.6 || 5.4 || 12.3
|-
| 113.4 || 8.6 || 16.8
|-
| 113.5 || 9.9 || 18.3
|-
| 113.1 || 10.1 || 18.8
|-
| 110.6 || 18.9 || 29.8
|-
| 107.8 || 30.3 || 43.3
|-
| 106.1 || 41.3 || 54.5
|-
| 104.4 || 52.2 || 64.9
|-
| 103.1 || 62.4 || 73.5
|-
| 102.3 || 69.6 || 79.2
|-
| 101.6 || 77.8 || 85.1
|-
| 100.8 || 87.6 || 91.4
|-
| 100.5 || 92.3 || 94.4
|-
| 100.4 || 94.5 || 96.0
|-
| 100.1 || 98.5 || 98.9
|-
|}
Spectral data
{| border="1" cellspacing="0" cellpadding="3" style="margin: 0 0 0 0.5em; background: #FFFFFF; border-collapse: collapse; border-color: #C0C090;"
! | UV-Vis
|-
| λmax
| 207 nm
Nanometre
A nanometre is a unit of length in the metric system, equal to one billionth of a metre. The name combines the SI prefix nano- with the parent unit name metre .The nanometre is often used to express dimensions on the atomic scale: the diameter...
(gas phase)
|-
| Extinction coefficient
Molar absorptivity
The molar absorption coefficient, molar extinction coefficient, or molar absorptivity, is a measurement of how strongly a chemical species absorbs light at a given wavelength...
, ε
| ?
|-
! | IR
Infrared
Infrared light is electromagnetic radiation with a wavelength longer than that of visible light, measured from the nominal edge of visible red light at 0.74 micrometres , and extending conventionally to 300 µm...
|-
| Major absorption bands
|
{|
|-
| colspan="2" align="center" | (liquid film)
|-
! Wave number !! transmittance
|-
| 2937 cm−1 || 26%
|-
| 2684 cm−1 || 41%
|-
| 2631 cm−1 || 39%
|-
| 2569 cm−1 || 49%
|-
| 1758 cm−1 || 19%
|-
| 1714 cm−1 || 4%
|-
| 1617 cm−1 || 66%
|-
| 1414 cm−1 || 20%
|-
| 1360 cm−1 || 39%
|-
| 1294 cm−1 || 12%
|-
| 1053 cm−1 || 67%
|-
| 1016 cm−1 || 41%
|-
| 937 cm−1 || 35%
|-
| 892 cm−1 || 41%
|-
| 629 cm−1 || 31%
|-
| 607 cm−1 || 49%
|-
| 481 cm−1 || 36%
|-
| 473 cm−1 || 52%
|-
|}
|-
! | NMR
NMR spectroscopy
Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy, is a research technique that exploits the magnetic properties of certain atomic nuclei to determine physical and chemical properties of atoms or the molecules in which they are contained...
|-
| Proton NMR
Proton NMR
Proton NMR is the application of nuclear magnetic resonance in NMR spectroscopy with respect to hydrogen-1 nuclei within the molecules of a substance, in order to determine the structure of its molecules. In samples where natural hydrogen is used, practically all of the hydrogen consists of the...
| δ CDCl3 2.10 (3H), 11.42 (1H)
|-
| Carbon-13 NMR
Carbon-13 NMR
Carbon-13 NMR is the application of nuclear magnetic resonance spectroscopy to carbon. It is analogous to proton NMR and allows the identification of carbon atoms in an organic molecule just as proton NMR identifies hydrogen atoms...
| δ CDCl3 20.8, 178.1
|-
| Other NMR data
|
|-
! | MS
Mass spectrometry
Mass spectrometry is an analytical technique that measures the mass-to-charge ratio of charged particles.It is used for determining masses of particles, for determining the elemental composition of a sample or molecule, and for elucidating the chemical structures of molecules, such as peptides and...
|-
| Masses of
main fragments
| 60 (75%), 45 (90%),
43 (100%), 42 (13%), 15 (17%)
|-
|}