5AT Advanced Technology Steam Locomotive

The 5AT Advanced Technology steam locomotive

Steam locomotive

A steam locomotive is a railway locomotive that produces its power through a steam engine. These locomotives are fueled by burning some combustible material, usually coal, wood or oil, to produce steam in a boiler, which drives the steam engine...

is a conceptual design conceived by the British engineer David Wardale, and first described in his definitive work on modern steam, "The Red Devil and Other Tales from the Age of Steam" .

Wardale's purpose in putting forward the "Super Class 5 4-6-0

4-6-0

Under the Whyte notation for the classification of steam locomotives, 4-6-0 represents the wheel arrangement of four leading wheels on two axles in a leading truck, six powered and coupled driving wheels on three axles, and no trailing wheels. This wheel arrangement became the second-most popular...

" design concept (as he then called it) was to offer a future for steam hauled trains on the main lines in the UK on which the use of heritage traction is likely to be gradually phased out as the speed and density of commercial rail traffic increase.

Proposal

Wardale's proposal was for a locomotive that would:

be acceptable to the British railway authorities by conforming with the size and weight of the BR 5MT Class 4-6-0
BR standard class 5
The British Railways Standard Class 5MT 4-6-0 was one of the standard classes of steam locomotives built by British Railways in the 1950s. 172 were built, essentially being a development of the LMS Stanier Class 5 4-6-0 .- Background :...

locomotives that have operated on British main lines since 1951;

offer a level of performance needed to integrate steam-hauled charter trains into the modern high-speed rail-system without causing bottle-necks;

offer much greater reliability and much lower operating costs than heritage steam locomotives.

The April 1998 edition of the Steam Railway magazine contained an article by Wardale titled "Whither Steam Now?" which included reference to a "locomotive of Class 5 4-6-0 format - calling it a 5GT - that would outperform any British Pacific

4-6-2

4-6-2, in the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of four leading wheels on two axles , six powered and coupled driving wheels on three axles, and two trailing wheels on one axle .These locomotives are also known as Pacifics...

."

Still described as the 5GT in a Feb 2001 Railway Magazine article titled "Wardale reveals £1.7 million 'new steam' proposal for the heritage market", the name 5AT first emerged in a letter from Alan Fozard to the editor of Steam Railway Magazine issue 259 in June–July 2001, which coincided with the formation of the 5AT Project .

The 5AT in its final conceptual form remains almost identical in size and weight to the BR 5MT, sharing the axle spacings and being just 4 tonnes heavier, with axle loads of 20 tonnes on each driving axle and 10 tonnes on each bogie axle. Where it differs in size from the 5MT is in its tender which has been massively enlarged to carry large quantities of fuel and water to extend its operating range. Such a large tender would also provide space for the locomotive carried parts of advanced signalling systems such as ERTMS. The 5AT's four-axle tender will have a gross weight of 80 tonnes with a fuel (light-oil) capacity of 7 tonnes and water capacity of 46 tonnes (12,000 US gallons).

Outline drawing

The 5AT Project

The 5AT Project was established in 2001 with the aim of commercializing Wardale's 5AT locomotive concept and bringing it to reality. The project was founded and continues to be spearheaded by a small team of professional engineers, scientists and businessmen and women whose common purpose is to see steam traction continue in main-line operation into the foreseeable future.

Design calculations

The first task undertaken by the project team was to commission David Wardale to undertake the Fundamental Design Calculations for the locomotive. The purpose of these calculations was to verify through detailed calculations that the conceptual design was viable in engineering terms and that that it would meet the performance predictions that Wardale had made for it (see below). At the same time, a project website was established.

Wardale completed the Fundamental Design Calculations for the locomotive in late 2004 after 2½ years of almost continuous labour. The work comprises 6100 lines of calculation divided into 26 sections as follows:

Section 1.1 - General Calculations - Determination of the Target Power & Tractive Effort-Speed Characteristics
Section 1.2 - General Calculations - Determination of the Target Load-Speed-Gradient Curves
Section 1.3 - General Calculations - Preliminary Basic Calculations
Section 1.4 - General Calculations - Tractive Effort Diagrams
Section 2.1 - Pistons, Rings Rods and Tail Rods;
Section 2.2 - Crosshead and Slidebars;
Section 2.3 - Connecting Rods;
Section 3 - Crankpins, coupling rods, driving & coupled axles, and crankpin & axle roller bearings;
Section 4 - Piston valves, valve rings, valve spindles and packings;
Section 5 - Valve gear;
Section 6 - Cylinders and cylinder liners;
Section 7 - Valve liner cooling steam calculations;
Section 8 - Wheel balancing;
Section 9 - Feed water heating;
Section 10 - Combustion air heating;
Section 11.1 - Boiler Strength;
Section 11.2 - Boiler Combustion System;
Section 11.3 - Combustion Gas + Steam Flow and Heat Transfer;
Section 12 - Exhaust system;
Section 13 - Spring rigging;
Section 14 - Main Frame;
Section 15 - Brakes;
Section 16 - Leading bogie + engine stability;
Section 17 - Specification of proprietary equipment;
Section 18 - Performance predictions (verification of Section 1 incorporating the outputs of other calculations).
Section 1.3F - General Calculations - Preliminary Basic Calculations (final version)

Business plan

Since the completion of the Fundamental Design Calculations, the 5AT Project team has focussed on the development of a business plan

Business plan

A business plan is a formal statement of a set of business goals, the reasons why they are believed attainable, and the plan for reaching those goals. It may also contain background information about the organization or team attempting to reach those goals....

to attract investment in the project. This has proved a difficult task because of the high development costs that are anticipated for designing and gaining railway approvals for a prototype locomotive, and the limited returns that might be expected from the locomotive's use on tour and "cruise" trains. Currently it is anticipated that the cost of building the locomotive can only be justified if the development costs are "written off".

Research

The project team has also undertaken extensive research into the possibilities of developing alternative designs based around the high efficiency and low maintenance concepts of the 5AT. Particular focus has been placed on the possibilities for (coal

Coal

Coal is a combustible black or brownish-black sedimentary rock usually occurring in rock strata in layers or veins called coal beds or coal seams. The harder forms, such as anthracite coal, can be regarded as metamorphic rock because of later exposure to elevated temperature and pressure...

-fired) steam traction for coal transportation in developing countries such as Indonesia

Indonesia

Indonesia , officially the Republic of Indonesia , is a country in Southeast Asia and Oceania. Indonesia is an archipelago comprising approximately 13,000 islands. It has 33 provinces with over 238 million people, and is the world's fourth most populous country. Indonesia is a republic, with an...

, for which the costs of running should be substantially lower than for diesel

Diesel locomotive

A diesel locomotive is a type of railroad locomotive in which the prime mover is a diesel engine, a reciprocating engine operating on the Diesel cycle as invented by Dr. Rudolf Diesel...

and electric

Electric locomotive

An electric locomotive is a locomotive powered by electricity from overhead lines, a third rail or an on-board energy storage device...

traction and where returns on investment appear most promising.

Predictions

The performance predictions for the locomotive are summarized as follows:

Max continuous operating speed 180 km/h/113 mph (with a maximum design speed 200 km/h/125 mph);
Max draw-bar power of 1890 kW/2535 hp at 113 km/h/70 mph;
Power-to-weight ratio of 12 kW per tonne (at the draw bar);
Max draw-bar thermal efficiency 11.8% (14% indicated efficiency);
Operating range between fuel fills 925 km (574.8 mi) and between water fills 610 km (379 mi) under "average conditions";
Operating range between fuel fills 552 km (343 mi) and between water fills 367 km (228 mi) at a maximum operating speed and power.

Technical advances

These performance predictions are predicated on several technical advances, mostly developed by Ing. L.D. Porta, all of which have been proven in practice, in most cases on Wardale's SAR Class 26 "The Red Devil" and described in Wardale's book on the subject. These advances are summarized as follows:

High boiler pressure: 2100 kPa (305 psi);
High superheat temperature: 450^oC;
Lempor exhaust system to minimize cylinder back-pressure;
Feedwater pre-heating;
Combustion air pre-heating;
Large streamlined steam pipes, passages and steam chests;
Large valves and valve ports to facilitate free steam-flow in and out of cylinders;
Long piston stroke to minimize piston mass and steam leakage;
Pistons and valves fitted with diesel-quality rings to reduce steam leakage;
Tight tolerances throughout (equivalent to modern diesel standards);
Super-high quality insulation, permanently secured in place, to minimize heat losses;
Air sanding system and enhanced-adhesion wheel-rim profiles to control wheel slip;
Clasp brakes on all wheels to improve braking performance to reduce stopping distances;
Ultra light-weight motion (rods, pistons and piston valves) to minimize inertia forces and thus balancing requirements (and thus hammer blow on the track).

Design features

In addition, the locomotive will incorporate the following features that will minimize its maintenance requirements and increase its reliability:

Improved component design using CAD/CAM to ensure tight tolerances and exact fit-up;
Finite Element stress analysis of all critical components to minimize wear and fractures;
Better materials – including bearings, lubricants, wear components, insulation etc.;
Replacement of bolts and rivets wherever possible with welded connections, eliminating the possibility of components becoming loose.
Simple two-cylinder design to minimize number of moving components.
No inaccessible components.
The use of AAR rules where appropriate, American Association of Railroads rules being generally the most robust design rules where empirical methods have to be used.
Roller bearings on all axles, crankpins, motion and valve gear, giving near-zero wear and minimal vibration;
Self-adjusting wedges on all driving and coupled axleboxes to eliminate axlebox-frame gaps, to prevent pounding and vibration associated with axlebox wear;
Robust horn stays to minimize risks of frame cracking at top-corners of horns;
Improved valve and cylinder tribology to minimize wear of rings and liners;
Tail rods on pistons to reduce piston ring and cylinder wear;
All-welded boiler – eliminates problems caused by riveted seams and screwed stays. No possibility of leakage or caustic embrittlement
Caustic embrittlement
Caustic embrittlement is the phenomenon in which the material of a boiler becomes brittle due to the accumulation of caustic substances.-Cause:...

;
Effective boiler water treatment that practically eliminates boiler maintenance.
Superior firebox stay design to minimize incidence of fractured stays;
Rigid engine-tender drawgear to eliminate ‘stamping’ and vibrations;
‘Drop-type’ firebox fusible plugs - safer than the usual lead-filled plugs;
Corrosion-resistant steel for tender and smokebox;
Improved boiler/frame connections to increase rigidity and reduce frame flexing;
Clasp brakes to minimize axle and axle bearing loads due to braking forces;
Centralized lubricant dispensing system for automatic lubrication of all sliding surfaces etc.;
Valve liners cooled with saturated steam to protect lubricants from extreme temperatures associated with high-superheated steam.

5AT Project Future

, the 5AT locomotive remains a concept which will not become reality unless funding is found to cover the cost of its development. Current estimates of the funding required to complete the detail design, manufacture, assembly, testing and main-line approvals for a prototype locomotive is slightly over £10 million ($16M). Subsequent "production" locomotives are estimated to cost in the order of £2.5M ($4M), a cost that could be justified by the anticipated returns from the haulage of luxury high-speed cruise and tour trains for which the concept is targeted.

The 5AT Fundamental Design Calculations on their own will serve as a valuable source of information for any future projects that aim to develop a new design of steam locomotive, and set a bench-mark for the level of performance that can be aimed for and achieved using current and proven technology.

Proposal

Outline drawing

The 5AT Project

Design calculations

Business plan

Research

Predictions

Technical advances

Design features

5AT Project Future

External links

See also